[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Dvdrtools-users] just problems...
From: |
klaus |
Subject: |
[Dvdrtools-users] just problems... |
Date: |
Tue, 15 Jul 2003 11:32:53 +0200 |
User-agent: |
Mutt/1.5.3i |
Hi All!
I've tried DVDRTOOLS v0.1.5 (compiled from source) on a SuSE-Linux 8.1 box with
a Kernel 2.4.21 (also compiled from source) without any success :-(
Installed are 1 DVD-Rom Drive, Toshiba SD-M1612 and
1 DVD-Writer, Toshiba SD-R5002 as ist can be seen on the output
of 'dvdrecord -scanbus':
...
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J?rg Schilling
Linux sg driver version: 3.1.25
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
scsibus0:
0,0,0 0) 'TOSHIBA ' 'DVD-ROM SD-M1612' '1004' Removable CD-ROM
0,1,0 1) 'TOSHIBA ' 'DVD-ROM SD-R5002' '1031' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
Trying to write a iso-image to a DVD-R/RW causes the following error:
# dvdrecord -v -dummy speed=1 dev=0,1,0 KNOPPIX_V3.2-2003-03-24-DE.iso
...
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J?rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-R5002'
Revision : '1031'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1723392 = 1683 KB
FIFO size : 4194304 = 4096 KB
dvdrecord: Drive does not support TAO recording.
dvdrecord: Illegal write mode for this drive.
I tried to write to the DVD-R/RW without any success before (getting
other error-messages) so possibly the Media has became damaged.
(?) can this be a reson for the error-message?
(?) what is TAO recording?
But when I try to call dvdrecord without any Media in the drive the
following error occurs - seems correct to me:
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TOSHIBA '
Identifikation : 'DVD-ROM SD-R5002'
Revision : '1031'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1723392 = 1683 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 697 MB
Total size: 801 MB (79:24.82) = 357362 sectors
Lout start: 801 MB (79:26/62) = 357362 sectors
dvdrecord: Input/output error. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
dvdrecord: No disk / Wrong disk!
What's also interesting is the fact that both drives appear 7 times
when loading the ide-scsi-module.
(?) Is this normal? Can this be disabled in any way???
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R5002 Rev: 1031
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R5002 Rev: 1031
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R5002 Rev: 1031
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R5002 Rev: 1031
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R5002 Rev: 1031
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R5002 Rev: 1031
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R5002 Rev: 1031
Type: CD-ROM ANSI SCSI revision: 02
thanks in advance!
Klaus.
--
Klaus Siegesleitner - address@hidden
SysAdmin at CAME (Center of Applied Molecular Engineering)
University of Salzburg, Jakob-Haringerstrasse 5, A-5020 Salzburg
- [Dvdrtools-users] just problems...,
klaus <=