[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Help-gnu-radius] Send IP Address
From: |
Rangel, Luciano |
Subject: |
RE: [Help-gnu-radius] Send IP Address |
Date: |
Tue, 27 May 2003 16:54:54 -0300 |
I can use with SecurID??
Exemple
DEFAULT Auth-Type = SecurID,
NAS-IP-Address = 192.168.11.1
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = "192.168.11.1+",
Framed-IP-Mask = "255.255.255.255"
-----Original Message-----
From: ETI - Barry Irchad Kader [mailto:address@hidden
Sent: Tuesday, May 27, 2003 4:34 PM
To: Rangel Luciano
Cc: 'address@hidden'
Subject: Re: [Help-gnu-radius] Send IP Address
Hi, Rangel.
"Rangel, Luciano" a écrit :
> How make to send ip address to Remote Client ?? I use Check Point VPN-1
with
> gateway and SecureRemote with client
Found this note from the mail archive of GNU Radius. Hope this will help.
Good luck.
=============================================================
From: Sergey Poznyakoff
Subject: Re: [Help-gnu-radius] gnu radius 0.95 IP address pool
Date: Thu, 20 Dec 2001 10:39:55 +0200
----------------------------------------------------------------------------
----
> it. Could you send me information about creating IP address pools in gnu
> radius 0.95. I want to allocate IP addresses to users from radius but I
The easiest way to create an IP address pool is using
Framed-IP-Address pair in DEFAULT profile. If the value of this pair
ends with '+', the port number will be added to the IP address
before replying to the NAS. For example:
DEFAULT Auth-Type = SQL
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = "192.168.10.1+",
Framed-IP-Mask = "255.255.255.255"
If you have serveral NASes and wish to use separate IP pools for them,
use distinct DEFAULT profiles for each NAS, e.g.:
DEFAULT Auth-Type = SQL,
NAS-IP-Address = 192.168.10.1
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = "192.168.10.1+",
Framed-IP-Mask = "255.255.255.255"
DEFAULT Auth-Type = SQL,
NAS-IP-Address = 192.168.11.1
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = "192.168.11.1+",
Framed-IP-Mask = "255.255.255.255"
Regards,
Sergey
=============================================================