qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2 08/16] target/riscv: move 'vlen' to riscv_cpu_properties[]


From: Vladimir Isaev
Subject: Re: [PATCH v2 08/16] target/riscv: move 'vlen' to riscv_cpu_properties[]
Date: Fri, 29 Dec 2023 14:22:32 +0300
User-agent: Mozilla Thunderbird

22.12.2023 15:22, Daniel Henrique Barboza wrote:
> 
> Turning 'vlen' into a class property will allow its default value to be
> overwritten by cpu_init() later on, solving the issue we have now where
> CPU specific settings are getting overwritten by the default.
> 
> For 'vlen', 'elen' and the blocksize options we need a way of tracking
> if the user set a value for them. This is benign for TCG since the cost
> of always validating these values are small, but for KVM we need syscalls
> to read the host values to make the validations. Knowing whether the
> user didn't touch the values makes a difference. We'll track user setting
> for these properties using a hash, like we do in the TCG driver.
> 
> Common validation bits are moved from riscv_cpu_validate_v() to
> prop_vlen_set() to be shared with KVM.
> 
> And, as done with every option we migrated to riscv_cpu_properties[],
> vendor CPUs can't have their 'vlen' value changed.
> 
> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
> ---
>  target/riscv/cpu.c         | 63 +++++++++++++++++++++++++++++++++++++-
>  target/riscv/tcg/tcg-cpu.c |  5 ---
>  2 files changed, 62 insertions(+), 6 deletions(-)
> 
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index d6625399a7..c2ff50bcab 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -29,6 +29,7 @@
>  #include "qapi/visitor.h"
>  #include "qemu/error-report.h"
>  #include "hw/qdev-properties.h"
> +#include "hw/core/qdev-prop-internal.h"
>  #include "migration/vmstate.h"
>  #include "fpu/softfloat-helpers.h"
>  #include "sysemu/kvm.h"
> @@ -53,6 +54,15 @@ const uint32_t misa_bits[] = {RVI, RVE, RVM, RVA, RVF, 
> RVD, RVV,
>  #define BYTE(x)   (x)
>  #endif
> 
> +/* Hash that stores general user set numeric options */
> +static GHashTable *general_user_opts;
> +
> +static void cpu_option_add_user_setting(const char *optname, uint32_t value)
> +{
> +    g_hash_table_insert(general_user_opts, (gpointer)optname,
> +                        GUINT_TO_POINTER(value));
> +}
> +
>  #define ISA_EXT_DATA_ENTRY(_name, _min_ver, _prop) \
>      {#_name, _min_ver, CPU_CFG_OFFSET(_prop)}
> 
> @@ -1244,6 +1254,8 @@ static void riscv_cpu_init(Object *obj)
>                        IRQ_LOCAL_MAX + IRQ_LOCAL_GUEST_MAX);
>  #endif /* CONFIG_USER_ONLY */
> 
> +    general_user_opts = g_hash_table_new(g_str_hash, g_str_equal);
> +
>      /*
>       * The timer and performance counters extensions were supported
>       * in QEMU before they were added as discrete extensions in the
> @@ -1664,8 +1676,54 @@ static const PropertyInfo prop_vext_spec = {
>      .set = prop_vext_spec_set,
>  };
> 
> +static void prop_vlen_set(Object *obj, Visitor *v, const char *name,
> +                         void *opaque, Error **errp)
> +{
> +    RISCVCPU *cpu = RISCV_CPU(obj);
> +    uint16_t value;
> +
> +    if (!visit_type_uint16(v, name, &value, errp)) {
> +        return;
> +    }
> +
> +    if (!is_power_of_2(value)) {
> +        error_setg(errp, "Vector extension VLEN must be power of 2");
> +        return;
> +    }
> +
> +    /* Always allow setting a default value */

What is the case for vlen equal to 0? Since in properties it is defined with 
default value set to 128.

> +    if (cpu->cfg.vlen == 0) {
> +        cpu->cfg.vlen = value;
> +        return;
> +    }
> +
> +    if (value != cpu->cfg.vlen && riscv_cpu_is_vendor(obj)) {
> +        cpu_set_prop_err(cpu, name, errp);
> +        error_append_hint(errp, "Current '%s' val: %u\n",
> +                          name, cpu->cfg.vlen);
> +        return;
> +    }
> +
> +    cpu_option_add_user_setting(name, value);
> +    cpu->cfg.vlen = value;
> +}
> +
> +static void prop_vlen_get(Object *obj, Visitor *v, const char *name,
> +                         void *opaque, Error **errp)
> +{
> +    uint16_t value = RISCV_CPU(obj)->cfg.vlen;
> +
> +    visit_type_uint16(v, name, &value, errp);
> +}
> +
> +static const PropertyInfo prop_vlen = {
> +    .name = "vlen",
> +    .get = prop_vlen_get,
> +    .set = prop_vlen_set,
> +    .set_default_value = qdev_propinfo_set_default_value_uint,
> +};
> +
>  Property riscv_cpu_options[] = {
> -    DEFINE_PROP_UINT16("vlen", RISCVCPU, cfg.vlen, 128),
>      DEFINE_PROP_UINT16("elen", RISCVCPU, cfg.elen, 64),
> 
>      DEFINE_PROP_UINT16("cbom_blocksize", RISCVCPU, cfg.cbom_blocksize, 64),
> @@ -1687,6 +1745,9 @@ static Property riscv_cpu_properties[] = {
>      {.name = "priv_spec", .info = &prop_priv_spec},
>      {.name = "vext_spec", .info = &prop_vext_spec},
> 
> +    {.name = "vlen", .info = &prop_vlen,
> +     .set_default = true, .defval.u = 128},
> +
>  #ifndef CONFIG_USER_ONLY
>      DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),
>  #endif
> diff --git a/target/riscv/tcg/tcg-cpu.c b/target/riscv/tcg/tcg-cpu.c
> index 6501c29d8e..8ec858e096 100644
> --- a/target/riscv/tcg/tcg-cpu.c
> +++ b/target/riscv/tcg/tcg-cpu.c
> @@ -178,11 +178,6 @@ static void riscv_cpu_validate_misa_mxl(RISCVCPU *cpu, 
> Error **errp)
>  static void riscv_cpu_validate_v(CPURISCVState *env, RISCVCPUConfig *cfg,
>                                   Error **errp)
>  {
> -    if (!is_power_of_2(cfg->vlen)) {
> -        error_setg(errp, "Vector extension VLEN must be power of 2");
> -        return;
> -    }
> -
>      if (cfg->vlen > RV_VLEN_MAX || cfg->vlen < 128) {
>          error_setg(errp,
>                     "Vector extension implementation only supports VLEN "
> --
> 2.43.0
> 
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]