acl-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Acl-devel] [PATCH attr 1/5] punt debian/rpm packaging logic


From: Mike Frysinger
Subject: [Acl-devel] [PATCH attr 1/5] punt debian/rpm packaging logic
Date: Wed, 8 Jan 2014 14:29:16 -0500

These files haven't been updated in years.  The respective upstreams
do their own thing now.  Punt this code to make future cleanups easier.

Signed-off-by: Mike Frysinger <address@hidden>

These
---
 .gitignore                    |   5 -
 Makefile                      |   2 +-
 Makepkgs                      |  27 +---
 debian/Makefile               |  51 -------
 debian/changelog              | 306 ------------------------------------------
 debian/compat                 |   1 -
 debian/control                |  46 -------
 debian/copyright              |  19 ---
 debian/rules                  |  75 -----------
 debian/watch                  |   2 -
 include/builddefs.in          |   4 -
 m4/package_utilies.m4         |  22 +--
 package/Makefile              |   5 +-
 package/rpm/Makefile          |  76 -----------
 package/rpm/attr.spec.in      |  91 -------------
 package/rpm/macros.template   |  30 -----
 package/rpm/rpm-2.rc.template |  25 ----
 17 files changed, 5 insertions(+), 782 deletions(-)
 delete mode 100644 debian/Makefile
 delete mode 100644 debian/changelog
 delete mode 100644 debian/compat
 delete mode 100644 debian/control
 delete mode 100644 debian/copyright
 delete mode 100755 debian/rules
 delete mode 100644 debian/watch
 delete mode 100644 package/rpm/Makefile
 delete mode 100644 package/rpm/attr.spec.in
 delete mode 100644 package/rpm/macros.template
 delete mode 100644 package/rpm/rpm-2.rc.template

diff --git a/.gitignore b/.gitignore
index 59f5246..25af69a 100644
--- a/.gitignore
+++ b/.gitignore
@@ -10,11 +10,6 @@
 /attr-*
 /attr/attr
 /autom4te.cache/
-/build/rpm/*.rpm
-/build/rpm/attr.spec
-/build/rpm/rpm-*.rc
-/build/rpm/rpmfiles*
-/build/rpm/rpmmacros
 /config.guess
 /config.log
 /config.status
diff --git a/Makefile b/Makefile
index df833cb..bd97921 100644
--- a/Makefile
+++ b/Makefile
@@ -38,7 +38,7 @@ LDIRT = config.log .dep config.status config.cache confdefs.h 
conftest* \
        Logs/* built .census install.* install-dev.* install-lib.* *.gz
 
 LIB_SUBDIRS = include libmisc libattr
-TOOL_SUBDIRS = attr getfattr setfattr examples test m4 man doc po debian 
package
+TOOL_SUBDIRS = attr getfattr setfattr examples test m4 man doc po package
 
 SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
 
diff --git a/Makepkgs b/Makepkgs
index 2938656..7386910 100755
--- a/Makepkgs
+++ b/Makepkgs
@@ -15,12 +15,8 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
-# Make whichever packages have been requested.
-# Defaults to RPMs.
-#
 LOGDIR=Logs
 
-type=rpm
 verbose=false
 
 MAKE=${MAKE:-make}
@@ -31,41 +27,22 @@ do
        case "$opt" in
        clean)
                ;; # ignored, kept for backward compatibility
-       rpm)
-               type=rpm ;;
-       debian)
-               type=debian ;;
        verbose)
                verbose=true ;;
        *)
-               echo "Usage: Makepkgs [verbose] [debian|rpm]"; exit 1 ;;
+               echo "Usage: Makepkgs [verbose]"; exit 1 ;;
        esac
 done
 
 # start with a clean manifest
-test -f files.rpm && rm -f files.rpm
-test -f filesdevel.rpm && rm -f filesdevel.rpm
-test -f fileslib.rpm && rm -f fileslib.rpm
-
 test ! -d $LOGDIR && mkdir $LOGDIR
 rm -rf $LOGDIR/* > /dev/null 2>&1
 
 # build Debian packages, cleans itself before starting
 SUDO=${SUDO:-sudo}
 test ! -z "$SUDO" && sudo=$SUDO
-if [ $type = debian ] ; then
-       LOGDEB=`pwd`
-       LOGDEB=../`basename $LOGDEB`.log
-       echo "== Debian build, log is $LOGDEB"; echo
-       if $verbose ; then
-               dpkg-buildpackage -r$SUDO | tee $LOGDEB
-       else
-               dpkg-buildpackage -r$SUDO > $LOGDEB || exit 1
-       fi
-       exit 0
-fi
 
-# build RPM packages - manual clean before starting
+# build packages - manual clean before starting
 echo "== clean, log is $LOGDIR/clean"
 if $verbose ; then
        $MAKE clean 2>&1 | tee $LOGDIR/clean
diff --git a/debian/Makefile b/debian/Makefile
deleted file mode 100644
index 2db31cf..0000000
--- a/debian/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# Copyright (c) 2000-2003 Silicon Graphics, Inc.  All Rights Reserved.
-# Copyright (C) 2009  Andreas Gruenbacher <address@hidden>
-#
-# This program is free software: you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-TOPDIR = ..
-include $(TOPDIR)/include/builddefs
-
-LIBPKG = lib$(PKG_NAME)1
-LSRCFILES = changelog compat control copyright rules watch
-DEV_DOC_DIR = $(PKG_DOC_DIR)/../$(LIBPKG)-dev
-LIB_DOC_DIR = $(PKG_DOC_DIR)/../$(LIBPKG)
-
-default:
-
-include $(BUILDRULES)
-
-install: default
-ifeq ($(PKG_DISTRIBUTION), debian)
-       $(INSTALL) -m 755 -d $(PKG_DOC_DIR)
-       $(INSTALL) -m 644 changelog $(PKG_DOC_DIR)/changelog.Debian
-endif
-
-install-dev: default
-ifeq ($(PKG_DISTRIBUTION), debian)
-       $(INSTALL) -m 755 -d $(PKG_DOC_DIR)
-       $(INSTALL) -m 755 -d $(DEV_DOC_DIR)
-       $(INSTALL) -m 644 copyright $(DEV_DOC_DIR)
-       $(INSTALL) -m 644 changelog $(DEV_DOC_DIR)/changelog.Debian
-endif
-
-install-lib: default
-ifeq ($(PKG_DISTRIBUTION), debian)
-       $(INSTALL) -m 755 -d $(PKG_DOC_DIR)
-       $(INSTALL) -m 755 -d $(LIB_DOC_DIR)
-       $(INSTALL) -m 644 copyright $(LIB_DOC_DIR)
-       $(INSTALL) -m 644 changelog $(LIB_DOC_DIR)/changelog.Debian
-endif
diff --git a/debian/changelog b/debian/changelog
deleted file mode 100644
index 21931e0..0000000
--- a/debian/changelog
+++ /dev/null
@@ -1,306 +0,0 @@
-attr (1:2.4.43-1) unstable; urgency=low
-
-  * New upstream release
-  * Updated debian/watch
-  * Standards version is 3.8.0
-
- -- Anibal Monsalve Salazar <address@hidden>  Thu, 03 Jul 2008 13:49:43 +1000
-
-attr (1:2.4.41-1) unstable; urgency=low
-
-  * New upstream release
-  * Add myself to Uploaders
-  * Remove /usr/share/doc/attr (closes: #405106, #445903)
-  * Bump dependency of attr to libattr1 (>= 2.4.41), might be too high but
-    good enough. (closes: #377700)
-  * Upstream closed bugs:
-     Manpage updated (closes: #446877)
-  * Closing old bugs:
-     2.4.36: (closes: #299095)
-  * Bump Standards Versions, no changes were needed.
-  * Bump DH_COMPAT.
-
- -- Niv Sardi <address@hidden>  Mon, 11 Feb 2008 17:45:43 +1100
-  
-attr (1:2.4.39-1) unstable; urgency=low
-
-  * New upstream release
-  * debian/control:
-    - Added homepage
-    - Added myself as comaintainer
-    - Set Standards-Version to 3.7.2
-    - libattr1-dev depends on libattr1 (= ${binary:Version})
-    - attr and libattr1 depend on ${misc:Depends}
-  * debian/watch: Added
-  * include/buildrules: Drop --omit-header from xgettext call, so that the
-    generated POT file becomes valid.
-  * debian/rules: Rebuild POT file so that Ubuntu's Rosetta can always
-    import an up to date version.
-
- -- Anibal Monsalve Salazar <address@hidden>  Sun, 16 Sep 2007 09:14:11 +1000
-
-attr (2.4.36-1) unstable; urgency=high
-
-  * New upstream release
-  * Reinstate xattr syscall entry points (closes: #403585)
-  * Fix ARM EABI issue differently, thanks to Lennert Buytenhek.
-
- -- Nathan Scott <address@hidden>  Tue, 19 Dec 2006 09:46:05 +1100
-
-attr (2.4.35-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Fri, 08 Dec 2006 14:12:25 +1100
-
-attr (2.4.33-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Mon, 03 Jul 2006 10:08:43 +1000
-
-attr (1:2.4.32-1.2) unstable; urgency=low
-
-  * Non-maintainer upload (porter NMU).
-  * add armel support, Closes: #421627
-  * fix kfreebsd build, Closes: #414232
-
- -- Riku Voipio <address@hidden>  Wed, 25 Jul 2007 23:33:58 +0300
-
-attr (1:2.4.32-1.1) unstable; urgency=emergency
-
-  * Non-maintainer upload.
-  * Reupload previous version and fix breackage of ls -la, cp -a and other
-    essential utilities.
-    Closes: #403601, #403592, #403585, #403590, #403599 and probably more.
-
- -- Andreas Barth <address@hidden>  Mon, 18 Dec 2006 13:42:31 +0000
-
-attr (2.4.32-1) unstable; urgency=low
-
-  * New upstream release
-  * Fixed build dependency on libc-dev (closes: #358786)
-
- -- Nathan Scott <address@hidden>  Tue, 28 Mar 2006 09:14:25 +1100
-
-attr (2.4.31-1) unstable; urgency=low
-
-  * New upstream release
-  * Updated Polish translation.
-  * Initial Swedish translation (closes: #349234)
-  * Switched from debmake to debhelper.
-  * Build updates for GNU/Hurd (closes: #299095)
-
- -- Nathan Scott <address@hidden>  Wed, 22 Feb 2006 13:14:24 +1100
-
-attr (2.4.25-1) unstable; urgency=low
-
-  * New upstream release
-  * Added French translation (closes: #333177)
-
- -- Nathan Scott <address@hidden>  Tue, 11 Oct 2005 06:47:13 +1000
-
-attr (2.4.21-1) unstable; urgency=low
-
-  * New upstream release
-  * Replace use of _POSIX_PATH_MAX with PATH_MAX (see bug 292819)
-
- -- Nathan Scott <address@hidden>  Mon, 31 Jan 2005 20:13:02 +1100
-
-attr (2.4.20-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Tue, 30 Nov 2004 15:28:15 +1100
-
-attr (2.4.18-1) unstable; urgency=low
-
-  * New upstream release
-  * Added Dutch language translation from Luk Claes (closes: #272482)
-
- -- Nathan Scott <address@hidden>  Tue, 21 Sep 2004 10:38:28 +1000
-
-attr (2.4.16-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Wed, 21 Apr 2004 08:54:29 +1000
-
-attr (2.4.15-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Mon, 02 Feb 2004 12:36:53 +1100
-
-attr (2.4.12-1) unstable; urgency=low
-
-  * New upstream release
-  * Fix GNU/Hurd build issues, thanks to Robert Millan (closes: #215154)
-
- -- Nathan Scott <address@hidden>  Mon, 13 Oct 2003 13:02:58 +1000
-
-attr (2.4.8-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Mon, 04 Aug 2003 09:18:00 +1000
-
-attr (2.4.7-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Tue, 29 Jul 2003 11:09:50 +1000
-
-attr (2.4.5-1) unstable; urgency=low
-
-  * New upstream release
-  * Removed the need to always run msgmerge during the build
-
- -- Nathan Scott <address@hidden>  Thu, 03 Jul 2003 12:47:44 +1000
-
-attr (2.4.4-1) unstable; urgency=low
-
-  * New upstream release
-  * Fix lib package dependencies, thanks to Steve Langasek (closes: #196046)
-
- -- Nathan Scott <address@hidden>  Wed, 04 Jun 2003 15:50:50 +1000
-
-attr (2.4.3-1) unstable; urgency=low
-
-  * New upstream release
-  * Note: COMPAT_XFSROOT environment variable is no longer needed
-
- -- Nathan Scott <address@hidden>  Sat, 26 Apr 2003 04:36:01 +1000
-
-attr (2.4.0-1) unstable; urgency=low
-
-  * New upstream release
-  * Updated policy version to which this package conforms
-  * Note: xfsdump and xfsrestore are affected by a change in libattr
-    which deprecates the attribute name prefix "xfsroot", replacing
-    it with the generic "trusted" name -- the environment variable
-    COMPAT_XFSROOT can be used to obtain the old behavior
-
- -- Nathan Scott <address@hidden>  Wed, 26 Feb 2003 16:07:57 +1100
-
-attr (2.2.0-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Sat, 30 Nov 2002 12:23:15 +1100
-
-attr (2.1.1-1) unstable; urgency=low
-
-  * Fix the group for libattr1, was "utils" now "libs" (closes: #166836)
-
- -- Nathan Scott <address@hidden>  Tue, 29 Oct 2002 09:29:52 +1100
-
-attr (2.1.0-1) unstable; urgency=low
-
-  * New upstream release, changing dev package name (closes: #141755)
-
- -- Nathan Scott <address@hidden>  Sat, 19 Oct 2002 08:40:38 +1000
-
-attr (2.0.12-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Mon,  7 Oct 2002 05:41:55 +1000
-
-attr (2.0.11-1) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Thu,  5 Sep 2002 09:12:02 +1000
-
-attr (2.0.9-1) unstable; urgency=low
-
-  * New upstream release (mainly build-related changes)
-  * Added system call numbers for the Alpha architecture
-
- -- Nathan Scott <address@hidden>  Thu,  4 Jul 2002 12:10:38 +1000
-
-attr (2.0.8-1) unstable; urgency=low
-
-  * New upstream bugfix release
-
- -- Nathan Scott <address@hidden>  Mon, 22 Apr 2002 15:04:53 +1000
-
-attr (2.0.7-1) unstable; urgency=low
-
-  * New upstream bugfix release
-
- -- Nathan Scott <address@hidden>  Sat, 13 Apr 2002 09:45:06 +1000
-
-attr (2.0.6-1) unstable; urgency=low
-
-  * New upstream bugfix release
-
- -- Nathan Scott <address@hidden>  Tue, 26 Mar 2002 15:13:49 +1100
-
-attr (2.0.5-1) unstable; urgency=low
-
-  * New upstream bugfix release
-
- -- Nathan Scott <address@hidden>  Tue, 12 Mar 2002 09:31:30 +1100
-
-attr (2.0.3-1) unstable; urgency=low
-
-  * Major new upstream release
-  * Uses the new official ext2/ext3/XFS extended attributes interfaces
-  * Several system call changes - THIS WILL NOT WORK WITH OLD KERNELS!
-    (because old kernels use unreserved, unofficial system calls)
-  * Introduction of a new package (libattr) requested by ACL upstream
-    for new POSIX ACL packages; this is in addition to the existing
-    attr and attr-dev packages this source generates
-
- -- Nathan Scott <address@hidden>  Tue, 26 Feb 2002 13:25:26 +1100
-
-attr (1.1.3-0) unstable; urgency=low
-
-  * New release to fix system call issue on PowerPC
-
- -- Nathan Scott <address@hidden>  Fri,  3 Aug 2001 11:06:55 +1000
-
-attr (1.1.2-0) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Fri, 27 Jul 2001 07:59:49 +1000
-
-attr (1.1.1-0) unstable; urgency=low
-
-  * New upstream release
-
- -- Nathan Scott <address@hidden>  Mon, 23 Jul 2001 10:27:37 +1000
-
-attr (1.1.0-0) unstable; urgency=low
-
-  * Reworked package slightly so that its not Debian native
-  * Debian-specific changes now documented in changelog.Debian.gz
-  * New upstream release (see /usr/share/doc/attr/changelog.gz)
-  * Checked standards compliance - update standards version to 3.5.5
-
- -- Nathan Scott <address@hidden>  Mon, 16 Jul 2001 18:14:56 +1000
-
-attr (1.0.4) unstable; urgency=low
-
-  * Work around syscall number collision on recent ia64 kernels
-
- -- Nathan Scott <address@hidden>  Mon,  2 Jul 2001 13:02:02 +1000
-
-attr (1.0.3) unstable; urgency=low
-
-  * Updates to man pages.
-
- -- Nathan Scott <address@hidden>  Fri, 18 May 2001 15:47:54 +1000
-
-attr (1.0.2) unstable; urgency=low
-
-  * Initial release.
-
- -- Nathan Scott <address@hidden>  Wed, 25 Apr 2001 12:19:15 +1000
-
-Local variables:
-mode: debian-changelog
-End:
diff --git a/debian/compat b/debian/compat
deleted file mode 100644
index 7ed6ff8..0000000
--- a/debian/compat
+++ /dev/null
@@ -1 +0,0 @@
-5
diff --git a/debian/control b/debian/control
deleted file mode 100644
index 5614da9..0000000
--- a/debian/control
+++ /dev/null
@@ -1,46 +0,0 @@
-Source: attr
-Section: utils
-Priority: optional
-Maintainer: Nathan Scott <address@hidden>
-Uploaders: Niv Sardi <address@hidden>, Anibal Monsalve Salazar <address@hidden>
-Build-Depends: autoconf, debhelper (>= 5), gettext, libtool
-Standards-Version: 3.8.0
-Homepage: http://oss.sgi.com/projects/xfs/
-
-Package: attr
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Conflicts: xfsdump (<< 2.0.0)
-Architecture: any
-Description: Utilities for manipulating filesystem extended attributes
- A set of tools for manipulating extended attributes on filesystem
- objects, in particular getfattr(1) and setfattr(1).
- An attr(1) command is also provided which is largely compatible
- with the SGI IRIX tool of the same name.
-
-Package: libattr1-dev
-Section: libdevel
-Priority: extra
-Depends: libc6-dev | libc-dev, libattr1 (= ${binary:Version})
-Provides: attr-dev
-Replaces: attr-dev
-Conflicts: attr-dev, attr (<< 2.0.0)
-Architecture: any
-Description: Extended attribute static libraries and headers
- attr-dev contains the libraries and header files needed to develop
- programs which make use of extended attributes.  For Linux programs,
- the documented system call API is the recommended interface, but an
- SGI IRIX compatibility interface is also provided.
- .
- Currently only ext2, ext3, JFS and XFS support extended attributes.
- The SGI IRIX compatibility API built above the Linux system calls is
- used by programs such as xfsdump(8), xfsrestore(8) and xfs_fsr(8).
-
-Package: libattr1
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Section: libs
-Priority: required
-Conflicts: attr (<< 2.0.0)
-Architecture: any
-Description: Extended attribute shared library
- Contains the runtime environment required by programs that make use
- of extended attributes.
diff --git a/debian/copyright b/debian/copyright
deleted file mode 100644
index ef9f486..0000000
--- a/debian/copyright
+++ /dev/null
@@ -1,19 +0,0 @@
-This package was debianized by Nathan Scott address@hidden on
-Sun, 19 Nov 2000 07:37:09 -0500.
-
-It can be downloaded from ftp://oss.sgi.com/projects/xfs/download/
-
-Copyright:
-
-Copyright (C) 2001-2002 Silicon Graphics, Inc.  All Rights Reserved.
-Copyright (C) 2001 Andreas Gruenbacher.
-
-You are free to distribute this software under Version 2.1
-of the GNU Lesser General Public License.
-On Debian systems, refer to /usr/share/common-licenses/LGPL-2.1
-for the complete text of the GNU Lesser General Public License.
-
-Certain components (as annotated in the source) are licensed
-under version 2 of the terms of the GNU General Public License.
-On Debian systems, the complete text of the GNU General Public
-License can be found in /usr/share/common-licenses/GPL file.
diff --git a/debian/rules b/debian/rules
deleted file mode 100755
index 1267c96..0000000
--- a/debian/rules
+++ /dev/null
@@ -1,75 +0,0 @@
-#!/usr/bin/make -f
-
-package = attr
-develop = lib$(package)1-dev
-library = lib$(package)1
-
-dirme  = debian/$(package)
-dirdev = debian/$(develop)
-dirlib = debian/$(library)
-pkgme  = DIST_ROOT=`pwd`/$(dirme);  export DIST_ROOT;
-pkgdev = DIST_ROOT=`pwd`/$(dirdev); export DIST_ROOT;
-pkglib = DIST_ROOT=`pwd`/$(dirlib); export DIST_ROOT;
-stdenv = @GZIP=-q; export GZIP;
-
-options = export DEBUG=-DNDEBUG DISTRIBUTION=debian \
-         INSTALL_USER=root INSTALL_GROUP=root ;
-checkdir = test -f debian/rules
-
-build: built
-built: config
-       @echo "== dpkg-buildpackage: build" 1>&2
-       $(MAKE) default
-       rm -f po/attr.pot
-       $(MAKE) -C po attr.pot
-       touch built
-
-config: .census
-.census:
-       @echo "== dpkg-buildpackage: configure" 1>&2
-       $(checkdir)
-       $(options) $(MAKE) configure
-       touch .census
-
-clean:
-       @echo "== dpkg-buildpackage: clean" 1>&2
-       $(checkdir)
-       -rm -f built .census
-       $(MAKE) distclean
-       -rm -rf $(dirme) $(dirdev) $(dirlib) debian/tmp
-       -rm -f debian/*substvars debian/files* debian/*.debhelper
-
-binary-indep:
-
-binary-arch: checkroot built
-       @echo "== dpkg-buildpackage: binary-arch" 1>&2
-       $(checkdir)
-       -rm -rf $(dirme) $(dirdev) $(dirlib)
-       $(pkgme)  $(MAKE) -C . install
-       $(pkgdev) $(MAKE) -C . install-dev
-       $(pkglib) $(MAKE) -C . install-lib
-       $(pkgme)  $(MAKE) -C build src-manifest
-
-       -rm -rf $(dirdev)/usr/share/doc/attr
-       -rm -rf $(dirlib)/usr/share/doc/attr
-
-       dh_installdocs
-       dh_installchangelogs
-       dh_strip
-       dh_compress
-       dh_fixperms
-       dh_makeshlibs -N $(library)
-       dh_makeshlibs -p $(library) -V 'libattr1 (>= 2.4.41-1)'
-       dh_installdeb
-       dh_shlibdeps
-       dh_gencontrol
-
-       dh_md5sums
-       dh_builddeb
-
-binary: binary-indep binary-arch
-
-checkroot:
-       test 0 -eq `id -u`
-
-.PHONY: binary binary-arch binary-indep clean checkroot
diff --git a/debian/watch b/debian/watch
deleted file mode 100644
index a87657d..0000000
--- a/debian/watch
+++ /dev/null
@@ -1,2 +0,0 @@
-version=3
-ftp://oss.sgi.com/projects/xfs/cmd_tars/ attr_([\d]+[\d\.]*)-[\d].tar.gz
diff --git a/include/builddefs.in b/include/builddefs.in
index f888d25..eef7aad 100644
--- a/include/builddefs.in
+++ b/include/builddefs.in
@@ -67,10 +67,6 @@ MSGFMT               = @msgfmt@
 MSGMERGE       = @msgmerge@
 XGETTEXT       = @xgettext@
 
-RPM            = @rpm@
-RPMBUILD       = @rpmbuild@
-RPM_VERSION    = @rpm_version@
-
 ENABLE_SHARED  = @enable_shared@
 ENABLE_GETTEXT = @enable_gettext@
 
diff --git a/m4/package_utilies.m4 b/m4/package_utilies.m4
index 551c142..5f44914 100644
--- a/m4/package_utilies.m4
+++ b/m4/package_utilies.m4
@@ -28,7 +28,7 @@ AC_DEFUN([AC_PACKAGE_NEED_UTILITY],
 # Generic macro, sets up all of the global build variables.
 # The following environment variables may be set to override defaults:
 #  CC MAKE LIBTOOL TAR ZIP MAKEDEPEND AWK SED ECHO SORT
-#  MSGFMT MSGMERGE XGETTEXT RPM
+#  MSGFMT MSGMERGE XGETTEXT
 #
 AC_DEFUN([AC_PACKAGE_UTILITIES],
   [ AC_PROG_CC
@@ -92,24 +92,4 @@ AC_DEFUN([AC_PACKAGE_UTILITIES],
 
        AC_DEFINE([ENABLE_GETTEXT], 1, [enable gettext])
     fi
-
-    AC_PATH_PROG(RPM, rpm,, $search_path)
-    rpm=$RPM
-    AC_SUBST(rpm)
-
-    dnl .. and what version is rpm
-    rpm_version=0
-    test -n "$RPM" && test -x "$RPM" && rpm_version=`$RPM --version \
-                        | awk '{print $NF}' | awk -F. '{V=1; print $V}'`
-    AC_SUBST(rpm_version)
-    dnl At some point in rpm 4.0, rpm can no longer build rpms, and
-    dnl rpmbuild is needed (rpmbuild may go way back; not sure)
-    dnl So, if rpm version >= 4.0, look for rpmbuild.  Otherwise build w/ rpm
-    if test $rpm_version -ge 4; then
-        AC_PATH_PROG(RPMBUILD, rpmbuild)
-        rpmbuild=$RPMBUILD
-    else
-        rpmbuild=$RPM
-    fi
-    AC_SUBST(rpmbuild)
   ])
diff --git a/package/Makefile b/package/Makefile
index 85dc1c5..0a9b6ce 100644
--- a/package/Makefile
+++ b/package/Makefile
@@ -25,7 +25,7 @@ SRCTAR=$(PKG_NAME)-$(PKG_VERSION).src.tar.gz
 LDIRT = *-manifest *.gz $(TOPDIR)/$(PKG_NAME)-*
 
 # for clean and clobber
-SUBDIRS = tar rpm
+SUBDIRS = tar
 
 # nothing to build here (it's all packaging)
 default install install-dev install-lib:
@@ -57,7 +57,4 @@ dist : default $(MANIFEST)
        if [ -x $(TAR) ]; then \
            ( echo "=== tar ===" && $(MAKEF) -C tar $@ || exit $$? ); \
        fi; \
-       if [ -x $(RPMBUILD) ]; then \
-           ( echo "=== rpm ===" && $(MAKEF) -C rpm $@ || exit $$? ); \
-       fi; \
        test -z "$$KEEP_DIST_ROOT" || rm -rf $$DIST_ROOT; echo Done
diff --git a/package/rpm/Makefile b/package/rpm/Makefile
deleted file mode 100644
index 173c367..0000000
--- a/package/rpm/Makefile
+++ /dev/null
@@ -1,76 +0,0 @@
-#
-# Copyright (c) 2000-2003 Silicon Graphics, Inc.  All Rights Reserved.
-# Copyright (C) 2009  Andreas Gruenbacher <address@hidden>
-#
-# This program is free software: you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-TOPDIR = ../..
-TREEROOT = $(shell cd ${TOPDIR}; pwd)
-include $(TOPDIR)/include/builddefs
-
-SPECF = $(PKG_NAME).spec
-LDIRT = *.rpm $(SPECF) rpmmacros rpmfiles* rpm-*.rc
-
-LSRCFILES = macros.template $(SPECF).in rpm-2.rc.template
-
-default install install-dev install-lib:
-
-include $(BUILDRULES)
-
-# Generate a binary rpm file
-dist : default $(SPECF) rpm-$(RPM_VERSION).rc
-       $(RPMBUILD) -ba --rcfile ./rpm-$(RPM_VERSION).rc $(SPECF)
-
-# Because rpm prior to v.2.90 does not support macros and old style config
-# is not supported by rpm v.3, we have to resort to such ugly hacks
-ifneq ($(RPM_VERSION),2)
-rpm-$(RPM_VERSION).rc : rpmmacros
-       @$(SED) -e '/^macrofiles:/s|~/.rpmmacros|rpmmacros|' 
</usr/lib/rpm/rpmrc >$@
-
-rpmmacros : macros.template
-       @$(SED) -e 's|%topdir%|$(TREEROOT)|g' < $< > $@
-else
-rpm-2.rc: rpm-2.rc.template
-       @$(SED) -e 's|%topdir%|$(TOPDIR)|g' < $< > $@
-endif
-
-# Generate the rpm specfile format file list from the install-sh manifest
-rpmfiles rpmfiles-dev rpmfiles-lib:
-       $(SORT) -u $$DIST_MANIFEST | $(AWK) > $@ '\
-$$1 == "d" { printf ("%%%%dir %%%%attr(%s,%s,%s) %s\n", $$2, $$3, $$4, $$5); } 
\
-$$1 == "f" { if (match ($$6, "$(PKG_MAN_DIR)") || \
-                match ($$6, "$(PKG_DOC_DIR)")) \
-                printf ("%%%%doc "); \
-            if (match ($$6, "$(PKG_MAN_DIR)")) \
-                printf ("%%%%attr(%s,%s,%s) %s*\n", $$2, $$3, $$4, $$6); \
-            else \
-                printf ("%%%%attr(%s,%s,%s) %s\n", $$2, $$3, $$4, $$6); } \
-$$1 == "l" { if (match ($$3, "$(PKG_MAN_DIR)") || \
-                match ($$3, "$(PKG_DOC_DIR)")) \
-                printf ("%%%%doc "); \
-            if (match ($$3, "$(PKG_MAN_DIR)")) \
-                printf ("%%%%attr(0777,root,root) %s*\n", $$3); \
-            else \
-                printf ("%%%%attr(0777,root,root) %s\n", $$3); }'
-
-.PHONY: $(SPECF)
-${SPECF} : ${SPECF}.in
-       $(SED) -e's|@pkg_name@|$(PKG_NAME)|g' \
-           -e's|@pkg_version@|$(PKG_VERSION)|g' \
-           -e's|@pkg_release@|$(PKG_RELEASE)|g' \
-           -e's|@pkg_distribution@|$(PKG_DISTRIBUTION)|g' \
-           -e's|@build_root@|$(DIST_ROOT)|g' \
-           -e'/^BuildRoot: *$$/d' \
-           -e's|@make@|$(MAKE)|g' < $< > $@
diff --git a/package/rpm/attr.spec.in b/package/rpm/attr.spec.in
deleted file mode 100644
index e577e6d..0000000
--- a/package/rpm/attr.spec.in
+++ /dev/null
@@ -1,91 +0,0 @@
-Summary: Utilities for managing filesystem extended attributes.
-Name: @pkg_name@
-Version: @pkg_version@
-Release: @pkg_release@
-Packager: Silicon Graphics, Inc. <http://www.sgi.com/>
-BuildRoot: @build_root@
-Prereq: /sbin/ldconfig
-Conflicts: xfsdump < 2.0.0
-Source: @address@hidden@address@hidden
-License: GPL
-Vendor: Silicon Graphics, Inc.
-URL: http://oss.sgi.com/projects/xfs/
-Group: System Environment/Base
-
-%description
-A set of tools for manipulating extended attributes on filesystem
-objects, in particular getfattr(1) and setfattr(1).
-An attr(1) command is also provided which is largely compatible
-with the SGI IRIX tool of the same name.
-
-%package -n libattr
-Summary: Dynamic library for extended attribute support.
-Group: Development/Libraries
-Prereq: /sbin/ldconfig
-
-%description -n libattr
-This package contains the libattr.so dynamic library which contains
-the extended attribute system calls and library functions.
-
-%package -n libattr-devel
-Summary: Extended attribute static libraries and headers.
-Group: Development/Libraries
-Requires: libattr
-Obsoletes: attr-devel
-
-%description -n libattr-devel
-This package contains the libraries and header files needed to
-develop programs which make use of extended attributes.
-For Linux programs, the documented system call API is the
-recommended interface, but an SGI IRIX compatibility interface
-is also provided.
-
-Currently only ext2, ext3, JFS and XFS support extended attributes.
-The SGI IRIX compatibility API built above the Linux system calls is
-used by programs such as xfsdump(8), xfsrestore(8) and xfs_fsr(8).
-
-You should install libattr-devel if you want to develop programs
-which make use of extended attributes.  If you install libattr-devel
-then you'll also want to install attr.
-
-%prep
-if [ -f .census ] ; then
-   if [ ! -d ${RPM_PACKAGE_NAME}-${RPM_PACKAGE_VERSION} ] ; then
-      ln -s . ${RPM_PACKAGE_NAME}-${RPM_PACKAGE_VERSION}
-   fi
-else
-%setup
-INSTALL_USER=root
-INSTALL_GROUP=root
-export INSTALL_USER INSTALL_GROUP
address@hidden@ configure
-fi
-
-%build
address@hidden@
-
-%install
-DIST_ROOT="$RPM_BUILD_ROOT"
-DIST_INSTALL=`pwd`/install.manifest
-DIST_INSTALL_DEV=`pwd`/install-dev.manifest
-DIST_INSTALL_LIB=`pwd`/install-lib.manifest
-export DIST_ROOT DIST_INSTALL DIST_INSTALL_DEV DIST_INSTALL_LIB
address@hidden@ install DIST_MANIFEST="$DIST_INSTALL"
address@hidden@ -C build/rpm rpmfiles DIST_MANIFEST="$DIST_INSTALL"
address@hidden@ install-dev DIST_MANIFEST="$DIST_INSTALL_DEV"
address@hidden@ -C build/rpm rpmfiles-dev DIST_MANIFEST="$DIST_INSTALL_DEV"
address@hidden@ install-lib DIST_MANIFEST="$DIST_INSTALL_LIB"
address@hidden@ -C build/rpm rpmfiles-lib DIST_MANIFEST="$DIST_INSTALL_LIB"
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post -n libattr -p /sbin/ldconfig
-
-%postun -n libattr -p /sbin/ldconfig
-
-%files -f build/rpm/rpmfiles
-
-%files -n libattr-devel -f build/rpm/rpmfiles-dev
-
-%files -n libattr -f build/rpm/rpmfiles-lib
diff --git a/package/rpm/macros.template b/package/rpm/macros.template
deleted file mode 100644
index 200ba39..0000000
--- a/package/rpm/macros.template
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# rpmrc.template
-#
-# Template to fudge rpm directory structure inside IRIX-like build
-# environment
-
-# Force 386 build on all platforms
-%_target i386-pc-linux
-%_target_cpu i386
-%_target_os linux
-
-# topdir == $(WORKAREA)
-%_topdir %topdir%
-
-# Following directories are specific to the topdir
-# This is where build is done. In our case it's the same as $WORKAREA
-%_builddir %topdir%
-
-# This is where foo.1.99.tar.gz is living in the real world.
-# Be careful not to run full rpm build as it will override the sources
-%_sourcedir %topdir%/build
-
-# This is where binary RPM and source RPM would end up
-%_rpmdir    %topdir%/build/rpm
-%_srcrpmdir %topdir%/build/rpm
-%_specdir   %topdir%/build/rpm
-
-# Leave RPM files in the same directory - we're not building for
-# multiple architectures
-%_rpmfilename %%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm
diff --git a/package/rpm/rpm-2.rc.template b/package/rpm/rpm-2.rc.template
deleted file mode 100644
index b53684f..0000000
--- a/package/rpm/rpm-2.rc.template
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# rpmrc.template
-#
-# Template to fudge rpm directory structure inside IRIX-like build
-# environment
-
-# topdir == $(WORKAREA)
-topdir: %topdir%
-
-# Following directories are specific to the topdir
-# This is where build is done. In out case it's the same as $WORKAREA
-# Be careful not to run full rpm build as it will override the sources
-builddir: %topdir%
-
-# This is where foo.1.99.tar.gz is living in the real world.
-sourcedir: %topdir%/build
-
-# This is where binary RPM and source RPM would end up
-rpmdir:    %topdir%/build/rpm
-srcrpmdir:  %topdir%/build/rpm
-specdir:   %topdir%/build/rpm
-
-# Leave RPM files in the same directory - we're not building for
-# multiple architectures
-rpmfilename: %{NAME}-%{VERSION}-%{RELEASE}.%{ARCH}.rpm
-- 
1.8.4.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]