[Ant-phone-devel] No Dialtone

[Malte Kämpf]

Hi, 

Perhaps someone here can help me. I installed ant-phone on a debian-testing. I 
have an AVM Fritz PCI. Hylafax is working with capi, but not started yet. So 
the hardware has to be okay, I think. Here now the debug output of ant-phone:

 athlin# artsdsp -m ant-phone -r -d
 unlink old socket file: Datei oder Verzeichnis nicht gefunden
 Reading options file: /etc/isdn/isdn.conf ...
 Reading options file: /root/.ant-phone/options ...
 Setting "HistorySize" to "10"...
 Setting "CallerIDSize" to "100"...
 Setting "SaveOptions" to "1"...
 Setting "ExecOnIncoming" to ""...
 Setting "PopupOnIncoming" to "1"...
 Setting "AudioDeviceIn" to "/dev/dsp"... 
 Setting "AudioDeviceOut" to "/dev/dsp"...
 Setting "ReleaseAudioDevices" to "1"...
 Setting "IdentifyingMSN" to "0"...
 Setting "ListenOnMSNs" to "*"... 
 Setting "ShowCallerID" to "1"...
 Setting "ShowLLCheckers" to "1"...
 Setting "ShowControlPad" to "1"...
 Setting "Muted" to "0"...
 Setting "RecordToFile" to "0"...
 Setting "RecordLocalChannel" to "1"...
 Setting "RecordRemoteChannel" to "1"...
 Setting "RecordingFormat" to "wav"...
 Setting "RecordingEncoding" to "ulaw"...
 Setting "PresetName0" to "Kurzwahl 1"...
 Setting "PresetNumber0" to ""...
 Setting "PresetName1" to "Kurzwahl 2"...
 Setting "PresetNumber1" to ""...
 Setting "PresetName2" to "Kurzwahl 3"...
 Setting "PresetNumber2" to ""...
 Setting "PresetName3" to "Kurzwahl 4"...
 Setting "PresetNumber3" to ""...
 Setting "MergeIsdnlog" to "1"...
 Setting "MergeIsdnlogDays" to "10"...
 Initializing ISDN device...
 Init OK.
 Info: History Filename: /root/.ant-phone/history.
 Info: History Number: 6354751.   (NUMBER CHANGED)
 Warning: Couldn't open isdnlog calls logfile. Proceeding without it.
 New state: STATE_READY

### And the output, if I try to call a Number:
 Initializing /dev/dsp ...
 session_audio_open: Opening audio device(s).
 New state: STATE_DIALING
 |
 Unknown message from ISDN device.
 |NO DIALTONE
 Unknown message from ISDN device.
 Closing sound device(s)...
 session_audio_close: Closing audio device(s).
 New state: STATE_READY
 |
 Unknown message from ISDN device.
 |OK
 Unknown message from ISDN device.
 Initializing /dev/dsp ...
 session_audio_open: Opening audio device(s).
 warning: leaving MCOP Dispatcher and still 146 types alive.
 New state: STATE_DIALING
 |
 Unknown message from ISDN device.
 |NO DIALTONE
 Unknown message from ISDN device.
 Closing sound device(s)...
 session_audio_close: Closing audio device(s).
 New state: STATE_READY
 |
 Unknown message from ISDN device.
 |OK
 Unknown message from ISDN device.

Here is the output of lsmod:
 athlin# lsmod
 Module                  Size  Used by    Tainted: P
 fcpci                 542976   1
 parport_pc             13444   1  (autoclean)
 lp                      6728   0
 parport                14272   1  [parport_pc lp]
 printer                 7296   0
 capi                   17536   0
 capifs                  3952   1  [capi]
 kernelcapi             30208   2  [fcpci capi]
 capiutil               22464   0  [kernelcapi]
 hisax                 169988   0  (unused)
 isdn                   98404   1  [hisax]
 nls_iso8859-1           2876   1  (autoclean)
 vfat                   10572   1  (autoclean)
 fat                    32152   0  (autoclean) [vfat]

So what's wrong? It seems to be that the program can't reach the ISDN-Card, 
isn't it? 

Thanks

Malte