autoconf-patches
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2 01/17] sync: some files from upstream


From: Stefano Lattarini
Subject: [PATCH v2 01/17] sync: some files from upstream
Date: Mon, 6 May 2013 15:21:08 +0200

* build-aux/config.guess: This.
* build-aux/config.sub: And this.
* build-aux/gendocs.sh: And this.
* build-aux/gnupload: And this.
* build-aux/texinfo.tex: And this.
* doc/standards.texi: And this.

Signed-off-by: Stefano Lattarini <address@hidden>
---
 build-aux/config.guess |  25 ++++---
 build-aux/config.sub   |  27 ++++----
 build-aux/gendocs.sh   | 172 ++++++++++++++++++++++++++++++-------------------
 build-aux/gnupload     |  23 ++++---
 build-aux/texinfo.tex  |  50 +++++++-------
 doc/standards.texi     |  19 +++---
 6 files changed, 189 insertions(+), 127 deletions(-)

diff --git a/build-aux/config.guess b/build-aux/config.guess
index 0aee604..2055429 100755
--- a/build-aux/config.guess
+++ b/build-aux/config.guess
@@ -1,10 +1,8 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012, 2013 Free Software Foundation, Inc.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
 
-timestamp='2012-12-30'
+timestamp='2013-04-24'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -52,9 +50,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
-2012, 2013 Free Software Foundation, Inc.
+Copyright 1992-2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -887,6 +883,9 @@ EOF
        if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
        echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
        exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
     arm*:Linux:*:*)
        eval $set_cc_for_build
        if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
@@ -925,6 +924,11 @@ EOF
        #ifdef __dietlibc__
        LIBC=dietlibc
        #endif
+       #else
+       #include <features.h>
+       #ifdef __UCLIBC__
+       LIBC=uclibc
+       #endif
 EOF
        eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
        echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
@@ -957,6 +961,9 @@ EOF
        eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
        test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
        ;;
+    or1k:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
     or32:Linux:*:*)
        echo ${UNAME_MACHINE}-unknown-linux-gnu
        exit ;;
@@ -999,7 +1006,9 @@ EOF
        echo ${UNAME_MACHINE}-dec-linux-gnu
        exit ;;
     x86_64:Linux:*:*)
-       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       LIBC=gnu
+       test -r /lib/libc.so && od -An -S13 /lib/libc.so | grep -q 
__uClibc_main && LIBC=uclibc
+       echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
        exit ;;
     xtensa*:Linux:*:*)
        echo ${UNAME_MACHINE}-unknown-linux-gnu
diff --git a/build-aux/config.sub b/build-aux/config.sub
index d1dfcc5..8b612ab 100755
--- a/build-aux/config.sub
+++ b/build-aux/config.sub
@@ -1,10 +1,8 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012, 2013 Free Software Foundation, Inc.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
 
-timestamp='2012-12-31'
+timestamp='2013-04-24'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -70,9 +68,7 @@ Report bugs and patches to <address@hidden>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
-2012, 2013 Free Software Foundation, Inc.
+Copyright 1992-2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -256,7 +252,7 @@ case $basic_machine in
        | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
        | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | 
alpha64pca5[67] \
        | am33_2.0 \
-       | arc \
+       | arc | arceb \
        | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
        | avr | avr32 \
        | be32 | be64 \
@@ -290,16 +286,17 @@ case $basic_machine in
        | mipsisa64r2 | mipsisa64r2el \
        | mipsisa64sb1 | mipsisa64sb1el \
        | mipsisa64sr71k | mipsisa64sr71kel \
+       | mipsr5900 | mipsr5900el \
        | mipstx39 | mipstx39el \
        | mn10200 | mn10300 \
        | moxie \
        | mt \
        | msp430 \
        | nds32 | nds32le | nds32be \
-       | nios | nios2 \
+       | nios | nios2 | nios2eb | nios2el \
        | ns16k | ns32k \
        | open8 \
-       | or32 \
+       | or1k | or32 \
        | pdp10 | pdp11 | pj | pjl \
        | powerpc | powerpc64 | powerpc64le | powerpcle \
        | pyramid \
@@ -369,7 +366,7 @@ case $basic_machine in
        | aarch64-* | aarch64_be-* \
        | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
        | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-       | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+       | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
        | arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
        | avr-* | avr32-* \
        | be32-* | be64-* \
@@ -407,12 +404,13 @@ case $basic_machine in
        | mipsisa64r2-* | mipsisa64r2el-* \
        | mipsisa64sb1-* | mipsisa64sb1el-* \
        | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+       | mipsr5900-* | mipsr5900el-* \
        | mipstx39-* | mipstx39el-* \
        | mmix-* \
        | mt-* \
        | msp430-* \
        | nds32-* | nds32le-* | nds32be-* \
-       | nios-* | nios2-* \
+       | nios-* | nios2-* | nios2eb-* | nios2el-* \
        | none-* | np1-* | ns16k-* | ns32k-* \
        | open8-* \
        | orion-* \
@@ -1354,7 +1352,7 @@ case $os in
        -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
              | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | 
-sunos[34]*\
              | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | 
-solaris* \
-             | -sym* | -kopensolaris* \
+             | -sym* | -kopensolaris* | -plan9* \
              | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
              | -aos* | -aros* \
              | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
@@ -1591,6 +1589,9 @@ case $basic_machine in
        mips*-*)
                os=-elf
                ;;
+       or1k-*)
+               os=-elf
+               ;;
        or32-*)
                os=-coff
                ;;
diff --git a/build-aux/gendocs.sh b/build-aux/gendocs.sh
index 0c0bc4b..98c7523 100755
--- a/build-aux/gendocs.sh
+++ b/build-aux/gendocs.sh
@@ -2,9 +2,9 @@
 # gendocs.sh -- generate a GNU manual in many formats.  This script is
 #   mentioned in maintain.texi.  See the help message below for usage details.
 
-scriptversion=2012-10-27.11
+scriptversion=2013-03-08.15
 
-# Copyright 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+# Copyright 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
 # Free Software Foundation, Inc.
 #
 # This program is free software: you can redistribute it and/or modify
@@ -56,7 +56,7 @@ unset use_texi2html
 
 version="gendocs.sh $scriptversion
 
-Copyright 2012 Free Software Foundation, Inc.
+Copyright 2013 Free Software Foundation, Inc.
 There is NO warranty.  You may redistribute this software
 under the terms of the GNU General Public License.
 For more information about these matters, see the files named COPYING."
@@ -69,16 +69,23 @@ discussion:
   http://www.gnu.org/prep/maintain_toc.html
 
 Options:
-  -s SRCFILE  read Texinfo from SRCFILE, instead of PACKAGE.{texinfo|texi|txi}
-  -o OUTDIR   write files into OUTDIR, instead of manual/.
-  -I DIR      append DIR to the Texinfo search path.
-  --email ADR use ADR as contact in generated web pages.
-  --docbook   convert through DocBook too (xml, txt, html, pdf).
-  --html ARG  pass indicated ARG to makeinfo or texi2html for HTML targets.
-  --info ARG  pass indicated ARG to makeinfo for Info, instead of --no-split.
-  --texi2html use texi2html to generate HTML targets.
-  --help      display this help and exit successfully.
-  --version   display version information and exit successfully.
+  --email ADR use ADR as contact in generated web pages; always give this.
+
+  -s SRCFILE   read Texinfo from SRCFILE, instead of PACKAGE.{texinfo|texi|txi}
+  -o OUTDIR    write files into OUTDIR, instead of manual/.
+  -I DIR       append DIR to the Texinfo search path.
+  --common ARG pass ARG in all invocations.
+  --html ARG   pass ARG to makeinfo or texi2html for HTML targets.
+  --info ARG   pass ARG to makeinfo for Info, instead of --no-split.
+  --no-ascii   skip generating the plain text output.
+  --source ARG include ARG in tar archive of sources.
+  --split HOW  make split HTML by node, section, chapter; default node.
+
+  --texi2html  use texi2html to make HTML target, with all split versions.
+  --docbook    convert through DocBook too (xml, txt, html, pdf).
+
+  --help       display this help and exit successfully.
+  --version    display version information and exit successfully.
 
 Simple example: $prog --email address@hidden emacs \"GNU Emacs Manual\"
 
@@ -92,8 +99,8 @@ Output will be in a new subdirectory \"manual\" (by default;
 use -o OUTDIR to override).  Move all the new files into your web CVS
 tree, as explained in the Web Pages node of maintain.texi.
 
-Please do use the --email ADDRESS option to specify your bug-reporting
-address in the generated HTML pages.
+Please use the --email ADDRESS option so your own bug-reporting
+address will be used in the generated HTML pages.
 
 MANUAL-TITLE is included as part of the HTML <title> of the overall
 manual/index.html file.  It should include the name of the package being
@@ -117,7 +124,7 @@ You can set the environment variables MAKEINFO, TEXI2DVI, 
TEXI2HTML,
 and PERL to control the programs that get executed, and
 GENDOCS_TEMPLATE_DIR to control where the gendocs_template file is
 looked for.  With --docbook, the environment variables DOCBOOK2HTML,
-DOCBOOK2PDF, and DOCBOOK2TXT are also respected.
+DOCBOOK2PDF, and DOCBOOK2TXT are also consulted.
 
 By default, makeinfo and texi2dvi are run in the default (English)
 locale, since that's the language of most Texinfo manuals.  If you
@@ -130,25 +137,34 @@ Email bug reports or enhancement requests to 
address@hidden
 MANUAL_TITLE=
 PACKAGE=
 address@hidden  # please override with --email
-commonarg= # Options passed to all the tools (-I dir).
+commonarg= # passed to all makeinfo/texi2html invcations.
+dirargs=   # passed to all tools (-I dir).
 dirs=      # -I's directories.
 htmlarg=
 infoarg=--no-split
+generate_ascii=true
 outdir=manual
+source_extra=
+split=node
 srcfile=
 
 while test $# -gt 0; do
   case $1 in
-    --email) shift; EMAIL=$1;;
-    --help) echo "$usage"; exit 0;;
-    --version) echo "$version"; exit 0;;
-    -s) shift; srcfile=$1;;
-    -o) shift; outdir=$1;;
-    -I) shift; commonarg="$commonarg -I '$1'"; dirs="$dirs $1";;
-    --docbook) docbook=yes;;
-    --html) shift; htmlarg=$1;;
-    --info) shift; infoarg=$1;;
+    -s)          shift; srcfile=$1;;
+    -o)          shift; outdir=$1;;
+    -I)          shift; dirargs="$dirargs -I '$1'"; dirs="$dirs $1";;
+    --common)    shift; commonarg=$1;;
+    --docbook)   docbook=yes;;
+    --email)     shift; EMAIL=$1;;
+    --html)      shift; htmlarg=$1;;
+    --info)      shift; infoarg=$1;;
+    --no-ascii)  generate_ascii=false;;
+    --source)    shift; source_extra=$1;;
+    --split)     shift; split=$1;;
     --texi2html) use_texi2html=1;;
+
+    --help)      echo "$usage"; exit 0;;
+    --version)   echo "$version"; exit 0;;
     -*)
       echo "$0: Unknown option \`$1'." >&2
       echo "$0: Try \`--help' for more information." >&2
@@ -166,6 +182,9 @@ while test $# -gt 0; do
   shift
 done
 
+# makeinfo uses the dirargs, but texi2dvi doesn't.
+commonarg=" $dirargs $commonarg"
+
 # For most of the following, the base name is just $PACKAGE
 base=$PACKAGE
 
@@ -247,46 +266,53 @@ case $outdir in
   *)  abs_outdir=$srcdir/$outdir;;
 esac
 
-echo "Generating output formats for $srcfile"
+echo "Making output for $srcfile"
+echo " in `pwd`"
+mkdir -p "$outdir/"
 
 cmd="$SETLANG $MAKEINFO -o $PACKAGE.info $commonarg $infoarg \"$srcfile\""
-echo "Generating info file(s)... ($cmd)"
+echo "Generating info... ($cmd)"
 eval "$cmd"
-mkdir -p "$outdir/"
 tar czf "$outdir/$PACKAGE.info.tar.gz" $PACKAGE.info*
+ls -l "$outdir/$PACKAGE.info.tar.gz"
 info_tgz_size=`calcsize "$outdir/$PACKAGE.info.tar.gz"`
 # do not mv the info files, there's no point in having them available
 # separately on the web.
 
-cmd="$SETLANG $TEXI2DVI $commonarg \"$srcfile\""
-echo "Generating dvi ... ($cmd)"
+cmd="$SETLANG $TEXI2DVI $dirargs \"$srcfile\""
+printf "\nGenerating dvi... ($cmd)\n"
 eval "$cmd"
-
 # compress/finish dvi:
 gzip -f -9 $PACKAGE.dvi
 dvi_gz_size=`calcsize $PACKAGE.dvi.gz`
 mv $PACKAGE.dvi.gz "$outdir/"
+ls -l "$outdir/$PACKAGE.dvi.gz"
 
-cmd="$SETLANG $TEXI2DVI --pdf $commonarg \"$srcfile\""
-echo "Generating pdf ... ($cmd)"
+cmd="$SETLANG $TEXI2DVI --pdf $dirargs \"$srcfile\""
+printf "\nGenerating pdf... ($cmd)\n"
 eval "$cmd"
 pdf_size=`calcsize $PACKAGE.pdf`
 mv $PACKAGE.pdf "$outdir/"
+ls -l "$outdir/$PACKAGE.pdf"
 
-opt="-o $PACKAGE.txt --no-split --no-headers $commonarg"
-cmd="$SETLANG $MAKEINFO $opt \"$srcfile\""
-echo "Generating ASCII... ($cmd)"
-eval "$cmd"
-ascii_size=`calcsize $PACKAGE.txt`
-gzip -f -9 -c $PACKAGE.txt >"$outdir/$PACKAGE.txt.gz"
-ascii_gz_size=`calcsize "$outdir/$PACKAGE.txt.gz"`
-mv $PACKAGE.txt "$outdir/"
+if $generate_ascii; then
+  opt="-o $PACKAGE.txt --no-split --no-headers $commonarg"
+  cmd="$SETLANG $MAKEINFO $opt \"$srcfile\""
+  printf "\nGenerating ascii... ($cmd)\n"
+  eval "$cmd"
+  ascii_size=`calcsize $PACKAGE.txt`
+  gzip -f -9 -c $PACKAGE.txt >"$outdir/$PACKAGE.txt.gz"
+  ascii_gz_size=`calcsize "$outdir/$PACKAGE.txt.gz"`
+  mv $PACKAGE.txt "$outdir/"
+  ls -l "$outdir/$PACKAGE.txt" "$outdir/$PACKAGE.txt.gz"
+fi
 
+# Split HTML at level $1.  Used for texi2html.
 html_split()
 {
-  opt="--split=$1 $commonarg $htmlarg --node-files"
+  opt="--split=$1 --node-files $commonarg $htmlarg"
   cmd="$SETLANG $TEXI2HTML --output $PACKAGE.html $opt \"$srcfile\""
-  echo "Generating html by $1... ($cmd)"
+  printf "\nGenerating html by $1... ($cmd)\n"
   eval "$cmd"
   split_html_dir=$PACKAGE.html
   (
@@ -304,7 +330,7 @@ html_split()
 if test -z "$use_texi2html"; then
   opt="--no-split --html -o $PACKAGE.html $commonarg $htmlarg"
   cmd="$SETLANG $MAKEINFO $opt \"$srcfile\""
-  echo "Generating monolithic html... ($cmd)"
+  printf "\nGenerating monolithic html... ($cmd)\n"
   rm -rf $PACKAGE.html  # in case a directory is left over
   eval "$cmd"
   html_mono_size=`calcsize $PACKAGE.html`
@@ -312,24 +338,38 @@ if test -z "$use_texi2html"; then
   html_mono_gz_size=`calcsize "$outdir/$PACKAGE.html.gz"`
   copy_images "$outdir/" $PACKAGE.html
   mv $PACKAGE.html "$outdir/"
-
-  opt="--html -o $PACKAGE.html $commonarg $htmlarg"
+  ls -l "$outdir/$PACKAGE.html" "$outdir/$PACKAGE.html.gz"
+
+  # Before Texinfo 5.0, makeinfo did not accept a --split=HOW option,
+  # it just always split by node.  So if we're splitting by node anyway,
+  # leave it out.
+  if test "x$split" = xnode; then
+    split_arg=
+  else
+    split_arg=--split=$split
+  fi
+  #
+  opt="--html -o $PACKAGE.html $split_arg $commonarg $htmlarg"
   cmd="$SETLANG $MAKEINFO $opt \"$srcfile\""
-  echo "Generating html by node... ($cmd)"
+  printf "\nGenerating html by $split... ($cmd)\n"
   eval "$cmd"
   split_html_dir=$PACKAGE.html
   copy_images $split_html_dir/ $split_html_dir/*.html
   (
     cd $split_html_dir || exit 1
-    tar -czf "$abs_outdir/$PACKAGE.html_node.tar.gz" -- *
+    tar -czf "$abs_outdir/$PACKAGE.html_$split.tar.gz" -- *
   )
-  html_node_tgz_size=`calcsize "$outdir/$PACKAGE.html_node.tar.gz"`
-  rm -rf "$outdir/html_node/"
-  mv $split_html_dir "$outdir/html_node/"
-else
+  eval \
+    html_${split}_tgz_size=`calcsize "$outdir/$PACKAGE.html_$split.tar.gz"`
+  rm -rf "$outdir/html_$split/"
+  mv $split_html_dir "$outdir/html_$split/"
+  du -s "$outdir/html_$split/"
+  ls -l "$outdir/$PACKAGE.html_$split.tar.gz"
+
+else # use texi2html:
   opt="--output $PACKAGE.html $commonarg $htmlarg"
   cmd="$SETLANG $TEXI2HTML $opt \"$srcfile\""
-  echo "Generating monolithic html... ($cmd)"
+  printf "\nGenerating monolithic html with texi2html... ($cmd)\n"
   rm -rf $PACKAGE.html  # in case a directory is left over
   eval "$cmd"
   html_mono_size=`calcsize $PACKAGE.html`
@@ -342,19 +382,20 @@ else
   html_split section
 fi
 
-echo Making .tar.gz for sources...
+printf "\nMaking .tar.gz for sources...\n"
 d=`dirname $srcfile`
 (
   cd "$d"
-  srcfiles=`ls *.texinfo *.texi *.txi *.eps 2>/dev/null` || true
-  tar cvzfh "$abs_outdir/$PACKAGE.texi.tar.gz" $srcfiles
+  srcfiles=`ls -d *.texinfo *.texi *.txi *.eps $source_extra 2>/dev/null` || 
true
+  tar czfh "$abs_outdir/$PACKAGE.texi.tar.gz" $srcfiles
+  ls -l "$abs_outdir/$PACKAGE.texi.tar.gz"
 )
 texi_tgz_size=`calcsize "$outdir/$PACKAGE.texi.tar.gz"`
 
 if test -n "$docbook"; then
   opt="-o - --docbook $commonarg"
   cmd="$SETLANG $MAKEINFO $opt \"$srcfile\" >${srcdir}/$PACKAGE-db.xml"
-  echo "Generating docbook XML... ($cmd)"
+  printf "\nGenerating docbook XML... ($cmd)\n"
   eval "$cmd"
   docbook_xml_size=`calcsize $PACKAGE-db.xml`
   gzip -f -9 -c $PACKAGE-db.xml >"$outdir/$PACKAGE-db.xml.gz"
@@ -364,7 +405,7 @@ if test -n "$docbook"; then
   split_html_db_dir=html_node_db
   opt="$commonarg -o $split_html_db_dir"
   cmd="$DOCBOOK2HTML $opt \"${outdir}/$PACKAGE-db.xml\""
-  echo "Generating docbook HTML... ($cmd)"
+  printf "\nGenerating docbook HTML... ($cmd)\n"
   eval "$cmd"
   (
     cd ${split_html_db_dir} || exit 1
@@ -377,24 +418,25 @@ if test -n "$docbook"; then
   rmdir ${split_html_db_dir}
 
   cmd="$DOCBOOK2TXT \"${outdir}/$PACKAGE-db.xml\""
-  echo "Generating docbook ASCII... ($cmd)"
+  printf "\nGenerating docbook ASCII... ($cmd)\n"
   eval "$cmd"
   docbook_ascii_size=`calcsize $PACKAGE-db.txt`
   mv $PACKAGE-db.txt "$outdir/"
 
   cmd="$DOCBOOK2PDF \"${outdir}/$PACKAGE-db.xml\""
-  echo "Generating docbook PDF... ($cmd)"
+  printf "\nGenerating docbook PDF... ($cmd)\n"
   eval "$cmd"
   docbook_pdf_size=`calcsize $PACKAGE-db.pdf`
   mv $PACKAGE-db.pdf "$outdir/"
 fi
 
-echo "Writing index file..."
+printf "\nMaking index file...\n"
 if test -z "$use_texi2html"; then
-   CONDS="/%%IF  *HTML_SECTION%%/,/%%ENDIF  *HTML_SECTION%%/d;\
-          /%%IF  *HTML_CHAPTER%%/,/%%ENDIF  *HTML_CHAPTER%%/d"
+  CONDS="/%%IF  *HTML_SECTION%%/,/%%ENDIF  *HTML_SECTION%%/d;\
+         /%%IF  *HTML_CHAPTER%%/,/%%ENDIF  *HTML_CHAPTER%%/d"
 else
-   CONDS="/%%ENDIF.*%%/d;/%%IF  *HTML_SECTION%%/d;/%%IF  *HTML_CHAPTER%%/d"
+  # should take account of --split here.
+  CONDS="/%%ENDIF.*%%/d;/%%IF  *HTML_SECTION%%/d;/%%IF  *HTML_CHAPTER%%/d"
 fi
 
 curdate=`$SETLANG date '+%B %d, %Y'`
diff --git a/build-aux/gnupload b/build-aux/gnupload
index e329e83..e3ac1ba 100755
--- a/build-aux/gnupload
+++ b/build-aux/gnupload
@@ -1,7 +1,7 @@
 #!/bin/sh
 # Sign files and upload them.
 
-scriptversion=2012-12-11.16; # UTC
+scriptversion=2013-03-19.17; # UTC
 
 # Copyright (C) 2004-2013 Free Software Foundation, Inc.
 #
@@ -39,9 +39,8 @@ nl='
 
 usage="Usage: $0 [OPTION]... [CMD] FILE... [[CMD] FILE...]
 
-Sign all FILES, and process them at selected destinations according to CMD.
-<http://www.gnu.org/prep/maintain/html_node/Automated-FTP-Uploads.html>
-explains further.
+Sign all FILES, and process them at the destinations specified with --to.
+If CMD is not given, it defaults to uploading.  See examples below.
 
 Commands:
   --delete                 delete FILES from destination
@@ -50,8 +49,7 @@ Commands:
   --                       treat the remaining arguments as files to upload
 
 Options:
-  --help                   print this help text and exit
-  --to DEST                specify one destination for FILES
+  --to DEST                specify a destination DEST for FILES
                            (multiple --to options are allowed)
   --user NAME              sign with key NAME
   --replace                allow replacements of existing files
@@ -59,10 +57,10 @@ Options:
   --dry-run                do nothing, show what would have been done
                            (including the constructed directive file)
   --version                output version information and exit
+  --help                   print this help text and exit
 
 If --symlink-regex is given without EXPR, then the link target name
 is created by replacing the version information with '-latest', e.g.:
-
   foo-1.3.4.tar.gz -> foo-latest.tar.gz
 
 Recognized destinations are:
@@ -80,6 +78,9 @@ in the current working directory, its contents are prepended 
to the
 actual command line options.  Use this to keep your defaults.  Comments
 (#) and empty lines in $conffile are allowed.
 
+<http://www.gnu.org/prep/maintain/html_node/Automated-FTP-Uploads.html>
+gives some further background.
+
 Examples:
 1. Upload foobar-1.0.tar.gz to ftp.gnu.org:
   gnupload --to ftp.gnu.org:foobar foobar-1.0.tar.gz
@@ -104,7 +105,7 @@ Examples:
            --delete oopsbar-0.9.91.tar.gz \\
            -- foobar-0.9.91.tar.gz
 
-gnupload uses the ncftpput program to do the transfers; if you don't
+gnupload executes a program ncftpput to do the transfers; if you don't
 happen to have an ncftp package installed, the ncftpput-ftp script in
 the build-aux/ directory of the gnulib package
 (http://savannah.gnu.org/projects/gnulib) may serve as a replacement.
@@ -132,6 +133,12 @@ while test -n "$1"; do
       if test -z "$2"; then
         echo "$0: Missing argument for --to" 1>&2
         exit 1
+      elif echo "$2" | grep 'ftp-upload\.gnu\.org' >/dev/null; then
+        echo "$0: Use ftp.gnu.org:PKGNAME or alpha.gnu.org:PKGNAME" >&2
+        echo "$0: for the destination, not ftp-upload.gnu.org (which" >&2
+        echo "$0:  is used for direct ftp uploads, not with gnupload)." >&2
+        echo "$0: See --help and its examples if need be." >&2
+        exit 1
       else
         to="$to $2"
         shift
diff --git a/build-aux/texinfo.tex b/build-aux/texinfo.tex
index d64f45b..85f184c 100644
--- a/build-aux/texinfo.tex
+++ b/build-aux/texinfo.tex
@@ -3,7 +3,7 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2013-01-01.15}
+\def\texinfoversion{2013-02-01.11}
 %
 % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
@@ -2496,7 +2496,7 @@ end
      \let-\codedash
      \let_\codeunder
     \else
-     \let-\realdash
+     \let-\normaldash
      \let_\realunder
     \fi
     \codex
@@ -2505,7 +2505,7 @@ end
 
 \def\codex #1{\tclose{#1}\endgroup}
 
-\def\realdash{-}
+\def\normaldash{-}
 \def\codedash{-\discretionary{}{}{}}
 \def\codeunder{%
   % this is all so @address@hidden can work.  In math mode, _
@@ -2520,9 +2520,9 @@ end
 }
 
 % An additional complication: the above will allow breaks after, e.g.,
-% each of the four underscores in __typeof__.  This is undesirable in
-% some manuals, especially if they don't have long identifiers in
-% general.  @allowcodebreaks provides a way to control this.
+% each of the four underscores in __typeof__.  This is bad.
+% @allowcodebreaks provides a document-level way to turn breaking at -
+% and _ on and off.
 %
 \newif\ifallowcodebreaks  \allowcodebreakstrue
 
@@ -4188,7 +4188,7 @@ end
     % ..., but we might end up with active ones in the argument if
     % we're called from @code, as @address@hidden, though.
     % So \let them to their normal equivalents.
-    \let-\realdash \let_\normalunderscore
+    \let-\normaldash \let_\normalunderscore
   }
 }
 
@@ -9993,22 +9993,26 @@ directory should work if nowhere else does.}
 @address@hidden@address@hidden
 
 % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.
-%
address@hidden@normalturnoffactive{%
-  @let"address@hidden
-  @address@hidden %$ font-lock fix
-  @address@hidden
-  @let<address@hidden
-  @let>address@hidden
-  @address@hidden
-  @address@hidden
-  @address@hidden
-  @let|address@hidden
-  @address@hidden
-  @markupsetuplqdefault
-  @markupsetuprqdefault
-  @unsepspaces
+% the literal character `\'.  Also revert - to its normal character, in
+% case the active - from code has slipped in.
+%
address@hidden = @active
+ @address@hidden
+   @address@hidden
+   @let"address@hidden
+   @address@hidden %$ font-lock fix
+   @address@hidden
+   @let<address@hidden
+   @let>address@hidden
+   @address@hidden
+   @address@hidden
+   @address@hidden
+   @let|address@hidden
+   @address@hidden
+   @markupsetuplqdefault
+   @markupsetuprqdefault
+   @unsepspaces
+ }
 }
 
 % Make _ and + \other characters, temporarily.
diff --git a/doc/standards.texi b/doc/standards.texi
index 6978e51..18ae0d7 100644
--- a/doc/standards.texi
+++ b/doc/standards.texi
@@ -3,7 +3,7 @@
 @setfilename standards.info
 @settitle GNU Coding Standards
 @c This date is automagically updated when you save this file:
address@hidden lastupdate January 1, 2013
address@hidden lastupdate April 27, 2013
 @c %**end of header
 
 @dircategory GNU organization
@@ -901,7 +901,6 @@ keyboard-driven console interface (for use by users from 
console
 mode).  Once you are doing the work to provide the functionality and
 the graphical interface, these won't be much extra work.
 
-
 @node Command-Line Interfaces
 @section Standards for Command Line Interfaces
 @cindex command-line interface
@@ -1076,7 +1075,7 @@ The Apache Software Foundation license,
 @url{http://www.apache.org/@/licenses}.
 
 @item Artistic
-The Artistic license used for Perl, 
@url{http://www.perlfoundation.org/@/legal}.
+The Artistic license used for Perl, 
@url{http://dev.perl.org/licenses/artistic.html}.
 
 @item Expat
 The Expat license, @url{http://www.jclark.com/@/xml/@/copying.txt}.
@@ -3374,13 +3373,13 @@ are purely tutorial and cover the basics of the 
subject.  These provide
 the framework for a beginner to understand the rest of the manual.  The
 Bison manual provides a good example of how to do this.
 
-To serve as a reference, a manual should have an Index that list all the
-functions, variables, options, and important concepts that are part of
-the program.  One combined Index should do for a short manual, but
-sometimes for a complex package it is better to use multiple indices.
-The Texinfo manual includes advice on preparing good index entries, see
address@hidden Entries, , Making Index Entries, texinfo, GNU Texinfo}, and
-see @ref{Indexing Commands, , Defining the Entries of an
+To serve as a reference, a manual should have an Index that lists all
+the functions, variables, options, and important concepts that are
+part of the program.  One combined Index should do for a short manual,
+but sometimes for a complex package it is better to use multiple
+indices.  The Texinfo manual includes advice on preparing good index
+entries, see @ref{Index Entries, , Making Index Entries, texinfo, GNU
+Texinfo}, and see @ref{Indexing Commands, , Defining the Entries of an
 Index, texinfo, GNU Texinfo}.
 
 Don't use Unix man pages as a model for how to write GNU documentation;
-- 
1.8.3.rc0.19.g7e6a0cc




reply via email to

[Prev in Thread] Current Thread [Next in Thread]