FYI: update aux files.

[Alexandre Duret-Lutz]

2004-09-19  Alexandre Duret-Lutz  <address@hidden>

        * INSTALL, lib/INSTALL, lib/config.sub, lib/config.guess,
        lib/texinfo.tex: New upstream versions.

Index: INSTALL
===================================================================
RCS file: /cvs/automake/automake/INSTALL,v
retrieving revision 1.7
diff -u -r1.7 INSTALL
--- INSTALL     20 Sep 2002 10:19:42 -0000      1.7
+++ INSTALL     19 Sep 2004 21:34:06 -0000
@@ -1,13 +1,16 @@
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
+Installation Instructions
+*************************
 
-   This file is free documentation; the Free Software Foundation gives
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
 
 Basic Installation
 ==================
 
-   These are generic installation instructions.
+These are generic installation instructions.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -67,9 +70,9 @@
 Compilers and Options
 =====================
 
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
@@ -82,7 +85,7 @@
 Compiling For Multiple Architectures
 ====================================
 
-   You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
 own directory.  To do this, you must use a version of `make' that
 supports the `VPATH' variable, such as GNU `make'.  `cd' to the
@@ -99,19 +102,19 @@
 Installation Names
 ==================
 
-   By default, `make install' will install the package's files in
+By default, `make install' will install the package's files in
 `/usr/local/bin', `/usr/local/man', etc.  You can specify an
 installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+option `--prefix=PREFIX'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
+give `configure' the option `--exec-prefix=PREFIX', the package will
+use PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files will still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 
@@ -122,7 +125,7 @@
 Optional Features
 =================
 
-   Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -137,11 +140,11 @@
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -167,9 +170,9 @@
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -178,7 +181,7 @@
 Defining Variables
 ==================
 
-   Variables not defined in a site shell script can be set in the
+Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ -192,8 +195,7 @@
 `configure' Invocation
 ======================
 
-   `configure' recognizes the following options to control how it
-operates.
+`configure' recognizes the following options to control how it operates.
 
 `--help'
 `-h'
Index: lib/INSTALL
===================================================================
RCS file: /cvs/automake/automake/lib/INSTALL,v
retrieving revision 1.7
diff -u -r1.7 INSTALL
--- lib/INSTALL 17 Sep 2002 18:41:01 -0000      1.7
+++ lib/INSTALL 19 Sep 2004 21:34:06 -0000
@@ -1,13 +1,16 @@
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
+Installation Instructions
+*************************
 
-   This file is free documentation; the Free Software Foundation gives
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
 
 Basic Installation
 ==================
 
-   These are generic installation instructions.
+These are generic installation instructions.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -67,9 +70,9 @@
 Compilers and Options
 =====================
 
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
@@ -82,7 +85,7 @@
 Compiling For Multiple Architectures
 ====================================
 
-   You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
 own directory.  To do this, you must use a version of `make' that
 supports the `VPATH' variable, such as GNU `make'.  `cd' to the
@@ -99,19 +102,19 @@
 Installation Names
 ==================
 
-   By default, `make install' will install the package's files in
+By default, `make install' will install the package's files in
 `/usr/local/bin', `/usr/local/man', etc.  You can specify an
 installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+option `--prefix=PREFIX'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
+give `configure' the option `--exec-prefix=PREFIX', the package will
+use PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files will still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 
@@ -122,7 +125,7 @@
 Optional Features
 =================
 
-   Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -137,11 +140,11 @@
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -167,9 +170,9 @@
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -178,7 +181,7 @@
 Defining Variables
 ==================
 
-   Variables not defined in a site shell script can be set in the
+Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ -192,8 +195,7 @@
 `configure' Invocation
 ======================
 
-   `configure' recognizes the following options to control how it
-operates.
+`configure' recognizes the following options to control how it operates.
 
 `--help'
 `-h'
Index: lib/config.guess
===================================================================
RCS file: /cvs/automake/automake/lib/config.guess,v
retrieving revision 1.43.2.1
diff -u -r1.43.2.1 config.guess
--- lib/config.guess    11 Aug 2004 21:36:22 -0000      1.43.2.1
+++ lib/config.guess    19 Sep 2004 21:34:06 -0000
@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
 
-timestamp='2004-08-11'
+timestamp='2004-09-07'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -203,9 +203,6 @@
     amiga:OpenBSD:*:*)
        echo m68k-unknown-openbsd${UNAME_RELEASE}
        exit 0 ;;
-    arc:OpenBSD:*:*)
-       echo mipsel-unknown-openbsd${UNAME_RELEASE}
-       exit 0 ;;
     cats:OpenBSD:*:*)
        echo arm-unknown-openbsd${UNAME_RELEASE}
        exit 0 ;;
@@ -230,18 +227,12 @@
     mvmeppc:OpenBSD:*:*)
        echo powerpc-unknown-openbsd${UNAME_RELEASE}
        exit 0 ;;
-    pmax:OpenBSD:*:*)
-       echo mipsel-unknown-openbsd${UNAME_RELEASE}
-       exit 0 ;;
     sgi:OpenBSD:*:*)
-       echo mipseb-unknown-openbsd${UNAME_RELEASE}
+       echo mips64-unknown-openbsd${UNAME_RELEASE}
        exit 0 ;;
     sun3:OpenBSD:*:*)
        echo m68k-unknown-openbsd${UNAME_RELEASE}
        exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-       echo mipsel-unknown-openbsd${UNAME_RELEASE}
-       exit 0 ;;
     *:OpenBSD:*:*)
        echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
        exit 0 ;;
@@ -833,6 +824,12 @@
     cris:Linux:*:*)
        echo cris-axis-linux-gnu
        exit 0 ;;
+    crisv32:Linux:*:*)
+       echo crisv32-axis-linux-gnu
+       exit 0 ;;
+    frv:Linux:*:*)
+       echo frv-unknown-linux-gnu
+       exit 0 ;;
     ia64:Linux:*:*)
        echo ${UNAME_MACHINE}-unknown-linux-gnu
        exit 0 ;;
Index: lib/config.sub
===================================================================
RCS file: /cvs/automake/automake/lib/config.sub,v
retrieving revision 1.180
diff -u -r1.180 config.sub
--- lib/config.sub      17 Jul 2004 11:03:49 -0000      1.180
+++ lib/config.sub      19 Sep 2004 21:34:07 -0000
@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
 
-timestamp='2004-06-24'
+timestamp='2004-08-29'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -457,6 +457,9 @@
        crds | unos)
                basic_machine=m68k-crds
                ;;
+       crisv32 | crisv32-* | etraxfs*)
+               basic_machine=crisv32-axis
+               ;;
        cris | cris-* | etrax*)
                basic_machine=cris-axis
                ;;
Index: lib/texinfo.tex
===================================================================
RCS file: /cvs/automake/automake/lib/texinfo.tex,v
retrieving revision 1.42.2.1
diff -u -r1.42.2.1 texinfo.tex
--- lib/texinfo.tex     11 Aug 2004 21:36:22 -0000      1.42.2.1
+++ lib/texinfo.tex     19 Sep 2004 21:34:11 -0000
@@ -3,7 +3,7 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2004-07-31.11}
+\def\texinfoversion{2004-09-06.16}
 %
 % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
@@ -2633,7 +2633,10 @@
   \startsavinginserts
   %
   % @item within a multitable starts a normal row.
-  \let\item\crcr
+  % We use \def instead of \let so that if one of the multitable entries
+  % contains an @itemize, we don't choke on the \item (seen as \crcr aka
+  % \endtemplate) expanding \doitemize.
+  \def\item{\crcr}%
   %
   \tolerance=9500
   \hbadness=9500
@@ -3530,7 +3533,10 @@
   \removelastskip
   %
   % We like breaks before the index initials, so insert a bonus.
-  \penalty -300
+  \nobreak
+  \vskip 0pt plus 3\baselineskip
+  \penalty 0
+  \vskip 0pt plus -3\baselineskip
   %
   % Typeset the initial.  Making this add up to a whole number of
   % baselineskips increases the chance of the dots lining up from column
@@ -3540,10 +3546,9 @@
   % No shrink because it confuses \balancecolumns.
   \vskip 1.67\baselineskip plus .5\baselineskip
   \leftline{\secbf #1}%
-  \vskip .33\baselineskip plus .1\baselineskip
-  %
   % Do our best not to break after the initial.
   \nobreak
+  \vskip .33\baselineskip plus .1\baselineskip
 }}
 
 % \entry typesets a paragraph consisting of the text (#1), dot leaders, and
@@ -5453,7 +5458,11 @@
     \newlinechar`\^^M
     \let\xeatspaces\eatspaces
     % Undo catcode changes of \startcontents and \doprintindex
-    address@hidden \catcode`\\=\other \escapechar=`\@
+    % When called from @insertcopying or (short)caption, we need active
+    % backslash to get it printed correctly.  Previously, we had
+    % \catcode`\\=\other instead.  We'll see whether a problem appears
+    % with macro expansion.                            --kasal, 19aug04
+    address@hidden \catcode`\\=\active \escapechar=`\@
     % ... and \example
     \spaceisspace
     %
@@ -5477,13 +5486,15 @@
                     % \do\macro1\do\macro2...
 
 % Utility routines.
-% This does \let #1 = #2, except with \csnames.
+% This does \let #1 = #2, with \csnames; that is,
+%   \let \csname#1\endcsname = \csname#2\endcsname
+% (except of course we have to play expansion games).
+% 
 \def\cslet#1#2{%
-\expandafter\expandafter
-\expandafter\let
-\expandafter\expandafter
-\csname#1\endcsname
-\csname#2\endcsname}
+  \expandafter\let
+  \csname#1\expandafter\endcsname
+  \csname#2\endcsname
+}
 
 % Trim leading and trailing spaces off a string.
 % Concepts from aro-bend problem 15 (see CTAN).
@@ -5511,14 +5522,15 @@
 % body, and then making it the \newlinechar in \scanmacro.
 
 \def\scanctxt{%
-  \catcode`\~=\other
-  \catcode`\^=\other
-  \catcode`\_=\other
-  \catcode`\|=\other
+  \catcode`\"=\other
+  \catcode`\+=\other
   \catcode`\<=\other
   \catcode`\>=\other
-  \catcode`\+=\other
   address@hidden
+  \catcode`\^=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\~=\other
 }
 
 \def\scanargctxt{%
@@ -6468,6 +6480,9 @@
     \ifx\captionline\empty \else
       \vskip.5\parskip
       \captionline
+      %
+      % Space below caption.
+      \vskip\parskip
     \fi
     %
     % If have an xref label, write the list of floats info.  Do this
@@ -6478,19 +6493,22 @@
       % caption if specified, else the full caption if specified, else nothing.
       {%
         \atdummies \turnoffactive \otherbackslash
-        address@hidden
-          \floatident
-          \ifx\thisshortcaption\empty
-            \ifx\thiscaption\empty \else : \thiscaption \fi
-          \else
-            : \thisshortcaption
-          \fi
-        }}%
+        % since we read the caption text in the macro world, where ^^M
+        % is turned into a normal character, we have to scan it back, so
+        % we don't write the literal three characters "^^M" into the aux file.
+       \scanexp{%
+         \xdef\noexpand\gtemp{%
+           \ifx\thisshortcaption\empty
+             \thiscaption
+           \else
+             \thisshortcaption
+           \fi
+         }%
+       }%
+        address@hidden
+         \ifx\gtemp\empty \else : \gtemp \fi}}%
       }%
     \fi
-    %
-    % Space below caption, if we printed anything.
-    \ifx\printedsomething\empty \else \vskip\parskip \fi
   \egroup  % end of \vtop
   %
   % place the captured inserts

-- 
Alexandre Duret-Lutz