automake
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ERROR: distcleancheck can only run from a VPATH build


From: Dr. David Kirkby
Subject: ERROR: distcleancheck can only run from a VPATH build
Date: Sun, 23 Mar 2003 00:01:33 +0000

Hi,
        I have written a program 'atlc'
http://atlc.sourceforge.net/
which get distributed with a lot of .bmp example files. If I run

automake ; autoconf ; configure ; make distclean ; configure ; make
distcheck

The 'make distcheck' always fails, with the error message:

ERROR: distcleancheck can only run from a VPATH build

then says:

ERROR: files left in build directory after distclean:
followed by a list of files. 

However, those files are in 'EXTRA_DIST' so I would have thought the
fact they are distributed, automake would not try to remove them with
'make distcheck' - is that right ??

I'm not 100% sure what a VPATH build is, but I tried running this from
a build directory that was not the same as where the source files are,
and get the same result. 

Here is the output. The Makefile.am is listed at the bottom, in case
someone can see what the hell I'm doing wrong.

automake ; autoconf ; configure ; make distclean ; configure ; make
distcheck
<snip>
rm -f *.o core *.core
rm -f *.tab.c
rm -rf ./.deps
rm -f Makefile 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build/src/non_gui'
Making distclean in .
make[3]: Entering directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build/src'
rm -f Makefile 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build/src'
make[2]: Leaving directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build/src'
Making distclean in .
make[2]: Entering directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build'
test -z "examplestest-coupler2.bmp.txt" || rm -f
examplestest-coupler2.bmp.txt
rm -f Makefile 
test -z "examplestest-coupler2.bmp.txt" || rm -f
examplestest-coupler2.bmp.txt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[2]: Leaving directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build'
rm -f config.status config.cache config.log configure.lineno
if test '..' = . ; then \
  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
  exit 1 ; \
fi
test `find . -type f -print | wc -l` -eq 0 \
  || { echo "ERROR: files left in build directory after distclean:" ;
\
       find . -type f -print ; \
       exit 1; } >&2
ERROR: files left in build directory after distclean:
./examples/200-Ohm-201b.E.bmp
./examples/200-Ohm-201b.Er.bmp
./examples/200-Ohm-201b.Ex.bmp
./examples/200-Ohm-201b.Ey.bmp
./examples/200-Ohm-201b.U.bmp
./examples/200-Ohm-201b.V.bmp
./examples/25-Ohm-401h.bmp
./examples/25-Ohm-801h.bmp
./examples/aliased.bmp
./examples/an_odd_er.bmp
./examples/bigger_not_in_centre.bmp
./examples/coax-500-100.bmp
./examples/coax-500-200-Er-100.bmp
./examples/coax-500-200.E.bmp
./examples/coax-500-200.Er.bmp
<snip>
./examples/very-odd.bmp
./examples/wide-9pixel.bmp
./examples/README
make[1]: *** [distcleancheck] Error 1
make[1]: Leaving directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build'
make: *** [distcheck] Error 2
sparrow /export/home/davek/atlc % 









# This is Makefile.am, which is processed by automake

EXTRA_DIST = \
13inner_22outer_coax.bmp.txt \
200-Ohm-201b.E.bmp \
200-Ohm-201b.Er.bmp \
200-Ohm-201b.Ex.bmp \
200-Ohm-201b.Ey.bmp \
200-Ohm-201b.U.bmp \
200-Ohm-201b.V.bmp \
25-Ohm-201b.bm \
25-Ohm-401h.bmp \
25-Ohm-801h.bmp \
Makefile \
Makefile.am \
Makefile.in \
README \
aliased.bmp \
aliased.bmp.txt \
an_odd_er.bmp \
an_odd_er.bmp.txt \
bigger_not_in_centre.bmp \
bigger_not_in_centre.bmp.txt \
coax-500-100.bmp \
coax-500-100.bmp.txt \
coax-500-200-Er-100.bmp \
coax-500-200-Er-100.bmp.txt \
coax-500-200.E.bmp \
coax-500-200.Er.bmp \
coax-500-200.Ex.bmp \
coax-500-200.Ey.bmp \
coax-500-200.U.bmp \
coax-500-200.V.bmp \
coax-500-200.bmp \
coax-500-200.bmp.txt \
coax-500-25.bmp \
coax-500-25.bmp.txt \
coax-500-400.bmp \
coax-500-400.bmp.txt \
coax-500-50.bmp \
coax-500-50.bmp.txt \
coax2.bmp \
coax2.bmp.txt \
coaxtest.bmp \
coaxtest.bmp.txt \
coaxtest2.bmp \
coaxtest2.bmp.txt \
coupler.bmp \
coupler.bmp.txt \
coupler8.bmp.txt \
create_for_Makefile.am \
cvsignore \
eccentric-e.E.bmp \
eccentric-e.Er.bmp \
eccentric-e.Ex.bmp \
eccentric-e.Ey.bmp \
eccentric-e.U.bmp \
eccentric-e.V.bmp \
enclosed-microstrip.bmp \
enclosed-microstrip.bmp.txt \
ex2.bmp \
ex2.bmp.txt \
ground-negative-short.bmp \
ground-negative-short.bmp.txt \
microstrip_coupler.bmp \
mix.bmp \
mix.bmp.txt \
multi-dielectric.bmp \
multi-dielectric.bmp.txt \
not-aliased.bmp \
not-aliased.bmp.txt \
not_in_centre.bmp \
not_in_centre.bmp.txt \
odd-coupler.bmp \
odd-coupler.bmp.txt \
off-centre-coax.bmp \
off-centre-coax.bmp.txt \
offset.bmp \
offset.bmp.txt \
pcb-coupler.bmp \
pcb-coupler.bmp.txt \
pcb.bmp \
pcb.bmp.txt \
positive-ground-short.bmp \
positive-ground-short.bmp.txt \
positive-negative-short.bmp \
positive-negative-short.bmp.txt \
test-coupler1.bmp \
test-coupler1.bmp.txt \
test-coupler2.bmp \
test.bmp \
test.bmp.txt \
test3.bmp \
test3.bmp.txt \
test4.bmp \
test4.bmp.txt \
test5.bmp \
test6.bmp \
test6.bmp.txt \
test7.bmp \
test7.bmp.txt \
twin-wire.bmp \
twin-wire.bmp.txt \
twin-wire2.bmp \
twin-wire2.bmp.txt \
twin-wire3.bmp \
twin-wire3.bmp.txt \
twin-wire4.bmp \
twin-wire4.bmp.txt \
ushape.bmp \
ushape.bmp.txt \
very-odd.bmp \
very-odd.bmp.txt \
wide-9pixel.bmp \
wide-9pixel.bmp.txt 

CLEANFILES =

DISTCLEANFILES = eccentric-a.bmp \
13inner_22outer_coax.bmp \
test_sym_strip.bmp \
test_sym_strip.Ex.bin \
test_sym_strip.Ey.bin \
test_sym_strip.E.bin \
test_sym_strip.V.bin \
test_sym_strip.U.bin \
test_sym_strip.Er.bin \
test_sym_strip.Ex.bmp \
test_sym_strip.Ey.bmp \
test_sym_strip.E.bmp \
test_sym_strip.V.bmp \
test_sym_strip.U.bmp \
test_sym_strip.Er.bmp \
test_rect_in_rect.bmp \
test_rect_in_rect.txt \
test_rect_in_rect.Ex.bin \
test_rect_in_rect.Ey.bin \
test_rect_in_rect.E.bin \
test_rect_in_rect.V.bin \
test_rect_in_rect.U.bin \
test_rect_in_rect.Er.bin \
test_rect_in_rect.Ex.bmp \
test_rect_in_rect.Ey.bmp \
test_rect_in_rect.E.bmp \
test_rect_in_rect.V.bmp \
test_rect_in_rect.U.bmp \
test_rect_in_rect.Er.bmp \
coax2.V.bmp \
25ohm-201h.Ex.bmp \
25ohm-201h.Ey.bmp \
25ohm-201h.E.bmp \
25ohm-201h.V.bmp \
25ohm-201h.U.bmp \
25ohm-201h.Er.bmp \
50ohm-201h.Ex.bmp \
50ohm-201h.Ey.bmp \
50ohm-201h.E.bmp \
50ohm-201h.V.bmp \
50ohm-201h.U.bmp \
50ohm-201h.Er.bmp \
eccentric-b.bmp \
eccentric-c.bmp \
eccentric-d.bmp \
eccentric-e.bmp \
eccentric-f.bmp \
eccentric-g.bmp \
eccentric-h.bmp \
eccentric-i.bmp \
eccentric-j.bmp \
eccentric-k.bmp \
eccentric-l.bmp \
eccentric-m.bmp \
eccentric-n.bmp \
25-Ohm-201b.bmp \
25-Ohm-401b.bmp \
50-Ohm-201b.bmp \
50-Ohm-401b.bmp \
100-Ohm-201b.bmp \
100-Ohm-401b.bmp \
200-Ohm-201b.bmp \
200-Ohm-401b.bmp \
200-Ohm-801b.bmp \
coupler1.bmp \
coupler2.bmp \
coupler3.bmp \
coupler4.bmp \
coupler5.bmp \
coupler6.bmp \
coupler7.bmp \
coupler8.bmp \
test-coupler1.E.even.bin \
test-coupler1.E.even.bmp \
test-coupler1.E.odd.bin \
test-coupler1.E.odd.bmp \
test-coupler1.Er.bin \
test-coupler1.Er.bmp \
test-coupler1.Ex.even.bin \
test-coupler1.Ex.even.bmp \
test-coupler1.Ex.odd.bin \
test-coupler1.Ex.odd.bmp \
test-coupler1.Ey.even.bin \
test-coupler1.Ey.even.bmp \
test-coupler1.Ey.odd.bin \
test-coupler1.Ey.odd.bmp \
test-coupler1.U.even.bin \
test-coupler1.U.even.bmp \
test-coupler1.U.odd.bin \
test-coupler1.U.odd.bmp \
test-coupler1.V.even.bin \
test-coupler1.V.even.bmp \
test-coupler1.V.odd.bin \
test-coupler1.V.odd.bmp \
coax2.E.bin \
coax2.Er.bin \
coax2.Ex.bin \
coax2.Ey.bin \
coax2.U.bin \
coax2.V.bin \
pcb.E.bin \
pcb.Er.bin \
pcb.Ex.bin \
pcb.Ey.bin \
pcb.U.bin \
pcb.V.bin \
twin-wire.E.bin \
twin-wire.Er.bin \
twin-wire.Ex.bin \
twin-wire.Ey.bin \
twin-wire.U.bin \
twin-wire.V.bin \
twin-wire.E.bmp \
twin-wire.Er.bmp \
twin-wire.Ex.bmp \
twin-wire.Ey.bmp \
twin-wire.U.bmp \
twin-wire.V.bmp \
ushape.E.bin \
ushape.Er.bin \
ushape.Ex.bin \
ushape.Ey.bin \
ushape.U.bin \
ushape.V.bin \
coax2.Er.bmp \
coax2.Ex.bmp \
coax2.Ey.bmp \
coax2.U.bmp \
coax2.E.bmp \
coax2.E.bmp \
pcb.Er.bmp \
pcb.Ex.bmp \
pcb.Ey.bmp \
pcb.U.bmp \
pcb.V.bmp \
pcb-coupler.E.even.bin \
pcb-coupler.E.odd.bin \
pcb-coupler.Er.bin \
pcb-coupler.Ex.even.bin \
pcb-coupler.Ex.odd.bin \
pcb-coupler.Ey.even.bin \
pcb-coupler.Ey.odd.bin \
pcb-coupler.U.even.bin \
pcb-coupler.U.odd.bin \
pcb-coupler.V.even.bin \
pcb-coupler.V.odd.bin \
pcb-coupler.E.odd.bin \
pcb-coupler.E.odd.bmp \
pcb-coupler.Ex.odd.bin \
pcb-coupler.Ex.odd.bmp \
pcb-coupler.Ey.odd.bin \
pcb-coupler.Ey.odd.bmp \
pcb-coupler.U.odd.bin \
pcb-coupler.U.odd.bmp \
pcb-coupler.V.odd.bin \
pcb-coupler.V.odd.bmp \
pcb-coupler.E.even.bmp \
pcb-coupler.Ex.even.bmp \
pcb-coupler.Ey.even.bmp \
pcb-coupler.U.even.bmp \
pcb-coupler.V.even.bmp \
pcb-coupler.Er.bmp \
test_stripline_coupler.Ex.odd.bmp \
test_stripline_coupler.Ey.odd.bmp \
test_stripline_coupler.E.odd.bmp \
test_stripline_coupler.V.odd.bmp \
test_stripline_coupler.U.odd.bmp \
test_stripline_coupler.Ex.even.bmp \
test_stripline_coupler.Ey.even.bmp \
test_stripline_coupler.E.even.bmp \
test_stripline_coupler.V.even.bmp \
test_stripline_coupler.U.even.bmp \
test_stripline_coupler.Er.bmp \
25ohm-201h.E.bin \
25ohm-201h.Er.bin \
25ohm-201h.Ex.bin \
25ohm-201h.Ey.bin \
25ohm-201h.U.bin \
25ohm-201h.V.bin \
50ohm-201h.E.bin \
50ohm-201h.Er.bin \
50ohm-201h.Ex.bin \
50ohm-201h.Ey.bin \
50ohm-201h.U.bin \
50ohm-201h.V.bin \
test-coupler2.E.even.bin \
test-coupler2.E.odd.bin \
test-coupler2.Er.bin \
test-coupler2.Ex.even.bin \
test-coupler2.Ex.odd.bin \
test-coupler2.Ey.even.bin \
test-coupler2.Ey.odd.bin \
test-coupler2.U.even.bin \
test-coupler2.U.odd.bin \
test-coupler2.V.even.bin \
test-coupler2.V.odd.bin \
test_stripline_coupler.E.even.bin \
test_stripline_coupler.E.odd.bin \
test_stripline_coupler.Er.bin \
test_stripline_coupler.Ex.even.bin \
test_stripline_coupler.Ex.odd.bin \
test_stripline_coupler.Ey.even.bin \
test_stripline_coupler.Ey.odd.bin \
test_stripline_coupler.U.even.bin \
test_stripline_coupler.U.odd.bin \
test_stripline_coupler.V.even.bin \
test_stripline_coupler.V.odd.bin  \
test-coupler2.Ex.odd.bmp \
test-coupler2.Ey.odd.bmp \
test-coupler2.E.odd.bmp \
test-coupler2.V.odd.bmp \
test-coupler2.U.odd.bmp \
test-coupler2.Ex.even.bmp \
test-coupler2.Ey.even.bmp \
test-coupler2.E.even.bmp \
test-coupler2.V.even.bmp \
test-coupler2.U.even.bmp \
test-coupler2.Er.bmp \
25ohm-201h.bmp \
25ohm-401h.bmp \
25ohm-801h.bmp \
50ohm-201h.bmp \
50ohm-401h.bmp \
50ohm-801h.bmp \
100ohm-201h.bmp \
100ohm-401h.bmp \
100ohm-801h.bmp \
200ohm-201h.bmp \
200ohm-401h.bmp \
200ohm-801h.bmp \
400ohm-1551h.bmp \
test_stripline_coupler.bmp \
central.bmp \
off-centre2.bmp \
cir.bmp  \
test-coupler2.bmp.txt \
test_stripline_coupler.bmp.pre-atlc.txt 

-- 
Dr. David Kirkby,
Senior Research Fellow,
Department of Medical Physics,
University College London,
11-20 Capper St, London, WC1E 6JA.
Tel: 020 7679 6408 Fax: 020 7679 6269
Internal telephone: ext 46408
e-mail address@hidden




reply via email to

[Prev in Thread] Current Thread [Next in Thread]