[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
AW: Question on compile & test / automake version 1.9.6 / test yacc6.tes
From: |
Jurzitza, Dieter |
Subject: |
AW: Question on compile & test / automake version 1.9.6 / test yacc6.test |
Date: |
Wed, 22 Nov 2006 11:53:34 +0100 |
Dear Mr. Wildenhues,
dear listmembers,
after my yesterday's writing I found that I had had communicated a real
problem, but the wrong cause.
The point is:
I cannot compile successfully (or, better to say, I cannot run yacc6.test
successfully) if I am using
make -j3
The message that comes is "foo.h" and / or "bar.h" not found. The reason (I
guess) is the fact that the parallel processing starts compiling the main.c
file (out of yacc6.test) *before* the header files have been created.
In contrast to my earlier writing the path addition / modification is not
neccessary and does not help at all. To avoid this problem, I would suggest the
following patch:
--- tests/yacc6.test
+++ tests/yacc6.test
@@ -28,6 +28,8 @@
set -e
+export MAKE='make'
+
cat > configure.in << 'END'
AC_INIT([yacc6], [1.0])
AC_CONFIG_AUX_DIR([aux1])
so, whatever "MAKE" is set to, within yacc6.test it will always operate in
single task mode. I would suggest to denote this somewhere in the automake
documentation (I personally haven't found any comment regarding parallel
processing, but this does not neccessarily mean anything).
Apart from this automake compiles and tests successfully, however, there is
still a decent amount of "FAIL" messages even though the tests in total return
"PASS". These are specifically related to check4.test, if anybody is interested
in looking into it, I would be pleased to provide the corresponding information
(i.e. logfiles etc.)
Take care
Dieter Jurzitza
--
________________________________________________
HARMAN BECKER AUTOMOTIVE SYSTEMS
Dr.-Ing. Dieter Jurzitza
Manager Hardware Systems
System Development
Industriegebiet Ittersbach
Becker-Göring Str. 16
D-76307 Karlsbad / Germany
Phone: +49 (0)7248 71-1577
Mobile: +49 0151 - 16 339 017
Fax: +49 (0)7248 71-1216
eMail: address@hidden
Internet: http://www.becker.de
> -----Ursprüngliche Nachricht-----
> Von: Ralf Wildenhues [mailto:address@hidden
> Gesendet: Dienstag, 21. November 2006 19:59
> An: Jurzitza, Dieter
> Cc: address@hidden
> Betreff: Re: Question on compile & test / automake version
> 1.9.6 / test yacc6.test
>
>
> Hello,
>
> Thanks for the report
*******************************************
Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte
Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und
loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe
dieser Mail ist nicht gestattet.
This e-mail may contain confidential and/or privileged information. If you are
not the intended recipient (or have received this e-mail in error) please
notify the sender immediately and delete this e-mail. Any unauthorized copying,
disclosure or distribution of the contents in this e-mail is strictly forbidden.
*******************************************
- AW: Question on compile & test / automake version 1.9.6 / test yacc6.test,
Jurzitza, Dieter <=