[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] Hi, you C-Geeks (was: Which program do I need to prog
From: |
Uwe Bonnes |
Subject: |
Re: [avr-gcc-list] Hi, you C-Geeks (was: Which program do I need to program ATtiny15 L with STK200 cable?) |
Date: |
Fri, 9 Mar 2001 15:39:20 +0100 |
>>>>> "Stefan" == Stefan Wimmer <address@hidden> writes:
Stefan> Hello, all you AVR/C-programmers out there, I had a look at some
Stefan> AVR data sheets and found that the ATtiny15L is programmed in
Stefan> low-voltage serial mode almost the same as a AT90S2333/4333.
Stefan> The only differences are the address ranges for Flash/EEPROM
Stefan> programming and the meaning and location of the Fuse bits.
Stefan> So how complicated would it be for one of you to modify the
Stefan> programming algorithm in programs like SP12, UISP, PonyProg,
Stefan> etc... ?
It looks like uisp-20010211 supports the ATtiny15:
hertz:~/tmp/cae/atmel/avr/uisp-20010211/src> grep -i tiny15 *
Avr.C: { "ATtiny15", 0x90, 0x06, 1024, 0, 64, 2000, 4000, AVR_TN15
},
AvrAtmel.C: {"TN15", 0x56, "ATtiny15", false},
Did you try that version? Where's the difference between th Tiny15 and
Tiny15L?
Bye
--
Uwe Bonnes address@hidden
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------