[Bayonne-devel] Bayonne randomly seg faults

[Mike Whitton]

Hello.  I have been running bayonne and it works great, however, if it
stays running for a long duration (2 to 3 days) it will randomly seg
fault.  This only happens while it is in use.  Below is the message from
the trace:

 trace: pid=26651 reason=11
 trace(0):
 /usr/local/lib/bayonne/1.2.11/bayonne.bin(stackTrace__Q23ost5Debugi+0x2f)
 [0x807ae5b]
 trace(1): /usr/local/lib/bayonne/1.2.11/trace.dbg [0x400b9d2d]
 trace(2): /lib/i686/libpthread.so.0 [0x401e6f75]
 trace(3): /usr/local/lib/bayonne/1.2.11/bayonne.bin [0x42029098]
 trace(4): /usr/local/lib/libccgnu2-1.0.so.0 [0x4009a132]
 trace(5): /lib/i686/libpthread.so.0 [0x401e3fef]
 trace(6): /usr/local/lib/bayonne/1.2.11/bayonne.bin(__clone+0x3a)
 [0x420e779a]

can any shed any light onto this?

here is my config:

        Redhat Linux 7.3
        Dialogic Drivers 5.1 FP1 (the purchased ones)
          - used kernel and LiS packages included with dialogic driver
        Bayonne 1.2.11
        Common C++ 1.0.13
        ccScript 2.5.6
        ccAudio 1.1.1
        ccrtp 1.0.2

thanks for the help, the system other than this is working great, we just
need to stabilize it...

mike whitton