address@hidden

[ochtas]

I'm running RedHat9.0 on a old Gateway, 640MHz Athlon, 64MB SDRAM, 10GB drive.  
Included is the entire process after I downloaded it CVS -- it's pretty big. I 
had to d/l gcc & libtool via apt-get; after I did, I received 17 errors when 
using ./configure. 


U fluxbox/util/fbrun/main.cc
address@hidden root]# cd fluxbox
address@hidden fluxbox]# ./autogen.sh
./autogen.sh: line 14: libtoolize: command not found
Executing:  aclocal -I .

aclocal: configure.in: 19: macro `AM_PROG_LIBTOOL' not found in library

 ERROR: Carefully read the error message and
        try to figure out what went wrong.
address@hidden fluxbox]# apt-get install libtool
Reading Package Lists... Done
Building Dependency Tree... Done
The following NEW packages will be installed:
  libtool
0 packages upgraded, 1 newly installed, 0 removed and 2 not upgraded.
Need to get 478kB of archives.
After unpacking 1584kB of additional disk space will be used.
Get:1 http://ayo.freshrpms.net redhat/9/i386/os libtool 1.4.3-5 [478kB]
Fetched 478kB in 4s (112kB/s)
Executing RPM (-Uvh)...
Preparing...                ########################################### [100%]
   1:libtool                ########################################### [100%]

address@hidden fluxbox]# ./autogen.sh
Executing:  aclocal -I .

Executing:  autoheader

Executing:  automake -a

src/FbTk/Makefile.am: installing `./depcomp'
Executing:  autoconf

Success, now continue with ./configure
Use configure --help for detailed help.
address@hidden fluxbox]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/root/fluxbox/missing: Unknown `--run' option
Try `/root/fluxbox/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
address@hidden fluxbox]# apt-get install gcc
Reading Package Lists... Done
Building Dependency Tree... Done
The following NEW packages will be installed:
  gcc
0 packages upgraded, 1 newly installed, 0 removed and 2 not upgraded.
Need to get 4518kB of archives.
After unpacking 11.6MB of additional disk space will be used.
Get:1 http://ayo.freshrpms.net redhat/9/i386/os gcc 3.2.2-5 [4518kB]
Fetched 4518kB in 30s (150kB/s)
Executing RPM (-Uvh)...
Preparing...                ########################################### [100%]
   1:gcc                    ########################################### [100%]
address@hidden fluxbox]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/root/fluxbox/missing: Unknown `--run' option
Try `/root/fluxbox/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for g++... no
checking for c++... no
checking for gpp... no
checking for aCC... no
checking for CC... no
checking for cxx... no
checking for cc++... no
checking for cl... no
checking for FCC... no
checking for KCC... no
checking for RCC... no
checking for xlC_r... no
checking for xlC... no
checking whether we are using the GNU C++ compiler... no
checking whether g++ accepts -g... no
checking dependency style of g++... none
checking for a BSD-compatible install... /usr/bin/install -c
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking for a sed that does not truncate output... /bin/sed
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking command to parse /usr/bin/nm -B output... failed
checking how to run the C++ preprocessor... /lib/cpp
checking for egrep... grep -E
checking for ANSI C header files... no
checking for sys/types.h... no
checking for sys/stat.h... no
checking for stdlib.h... no
checking for string.h... no
checking for memory.h... no
checking for strings.h... no
checking for inttypes.h... no
checking for stdint.h... no
checking for unistd.h... no
checking dlfcn.h usability... no
checking dlfcn.h presence... yes
configure: WARNING: dlfcn.h: present but cannot be compiled
configure: WARNING: dlfcn.h: check for missing prerequisite headers?
configure: WARNING: dlfcn.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... no
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... no
checking if we can lock with hard links... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... no
checking whether to build shared libraries... no
checking whether to build static libraries... yes
creating libtool
checking for sed... sed
checking for ANSI C header files... (cached) no
checking errno.h usability... no
checking errno.h presence... yes
configure: WARNING: errno.h: present but cannot be compiled
configure: WARNING: errno.h: check for missing prerequisite headers?
configure: WARNING: errno.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for errno.h... yes
checking ctype.h usability... no
checking ctype.h presence... yes
configure: WARNING: ctype.h: present but cannot be compiled
configure: WARNING: ctype.h: check for missing prerequisite headers?
configure: WARNING: ctype.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for ctype.h... yes
checking dirent.h usability... no
checking dirent.h presence... yes
configure: WARNING: dirent.h: present but cannot be compiled
configure: WARNING: dirent.h: check for missing prerequisite headers?
configure: WARNING: dirent.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for dirent.h... yes
checking fcntl.h usability... no
checking fcntl.h presence... yes
configure: WARNING: fcntl.h: present but cannot be compiled
configure: WARNING: fcntl.h: check for missing prerequisite headers?
configure: WARNING: fcntl.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for fcntl.h... yes
checking libgen.h usability... no
checking libgen.h presence... yes
configure: WARNING: libgen.h: present but cannot be compiled
configure: WARNING: libgen.h: check for missing prerequisite headers?
configure: WARNING: libgen.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for libgen.h... yes
checking locale.h usability... no
checking locale.h presence... yes
configure: WARNING: locale.h: present but cannot be compiled
configure: WARNING: locale.h: check for missing prerequisite headers?
configure: WARNING: locale.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for locale.h... yes
checking nl_types.h usability... no
checking nl_types.h presence... yes
configure: WARNING: nl_types.h: present but cannot be compiled
configure: WARNING: nl_types.h: check for missing prerequisite headers?
configure: WARNING: nl_types.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for nl_types.h... yes
checking process.h usability... no
checking process.h presence... no
checking for process.h... no
checking signal.h usability... no
checking signal.h presence... yes
configure: WARNING: signal.h: present but cannot be compiled
configure: WARNING: signal.h: check for missing prerequisite headers?
configure: WARNING: signal.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for signal.h... yes
checking stdarg.h usability... no
checking stdarg.h presence... yes
configure: WARNING: stdarg.h: present but cannot be compiled
configure: WARNING: stdarg.h: check for missing prerequisite headers?
configure: WARNING: stdarg.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for stdarg.h... yes
checking stdio.h usability... no
checking stdio.h presence... yes
configure: WARNING: stdio.h: present but cannot be compiled
configure: WARNING: stdio.h: check for missing prerequisite headers?
configure: WARNING: stdio.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for stdio.h... yes
checking time.h usability... no
checking time.h presence... yes
configure: WARNING: time.h: present but cannot be compiled
configure: WARNING: time.h: check for missing prerequisite headers?
configure: WARNING: time.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for time.h... yes
checking for unistd.h... (cached) no
checking sys/param.h usability... no
checking sys/param.h presence... yes
configure: WARNING: sys/param.h: present but cannot be compiled
configure: WARNING: sys/param.h: check for missing prerequisite headers?
configure: WARNING: sys/param.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for sys/param.h... yes
checking sys/select.h usability... no
checking sys/select.h presence... yes
configure: WARNING: sys/select.h: present but cannot be compiled
configure: WARNING: sys/select.h: check for missing prerequisite headers?
configure: WARNING: sys/select.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for sys/select.h... yes
checking sys/signal.h usability... no
checking sys/signal.h presence... yes
configure: WARNING: sys/signal.h: present but cannot be compiled
configure: WARNING: sys/signal.h: check for missing prerequisite headers?
configure: WARNING: sys/signal.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for sys/signal.h... yes
checking for sys/stat.h... (cached) no
checking sys/time.h usability... no
checking sys/time.h presence... yes
configure: WARNING: sys/time.h: present but cannot be compiled
configure: WARNING: sys/time.h: check for missing prerequisite headers?
configure: WARNING: sys/time.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for sys/time.h... yes
checking for sys/types.h... (cached) no
checking sys/wait.h usability... no
checking sys/wait.h presence... yes
configure: WARNING: sys/wait.h: present but cannot be compiled
configure: WARNING: sys/wait.h: check for missing prerequisite headers?
configure: WARNING: sys/wait.h: proceeding with the preprocessor's result
configure: WARNING:     ## ------------------------------------ ##
configure: WARNING:     ## Report this to address@hidden ##
configure: WARNING:     ## ------------------------------------ ##
checking for sys/wait.h... yes
checking whether time.h and sys/time.h may both be included... no
checking for basename... no
checking for basename in -lgen... no
checking for getpid... no
checking for setlocale... no
checking for sigaction... no
checking for strcasestr... no
checking for snprintf... no
checking for vsnprintf... no
checking for catopen... no
checking for catgets... no
checking for catclose... no
checking for strftime... no
checking for t_open in -lnsl... no
checking for socket in -lsocket... no
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for gethostbyname... no
checking for gethostbyname in -lnsl... no
checking for gethostbyname in -lbsd... no
checking for connect... no
checking for connect in -lsocket... no
checking for remove... no
checking for remove in -lposix... no
checking for shmat... no
checking for shmat in -lipc... no
checking for IceConnectionNumber in -lICE... no
checking for XOpenDisplay in -lX11... no
configure: error: Could not find XOpenDisplay in -lX11.
address@hidden fluxbox]#


Failure is not an option. It's an embedded M$ app.