From: Subject: address@hidden To: Date: Thu, 11 Sep 2003 5:03:29 -0400 X-Sent: 2 weeks, 49 minutes, 52 seconds ago I'm running RedHat9.0 on a old Gateway, 640MHz Athlon, 64MB SDRAM, 10GB drive. Included is the entire process after I downloaded it CVS -- it's pretty big. I had to d/l gcc & libtool via apt-get; after I did, I received 17 errors when using ./configure. U fluxbox/util/fbrun/main.cc address@hidden root]# cd fluxbox address@hidden fluxbox]# ./autogen.sh ./autogen.sh: line 14: libtoolize: command not found Executing: aclocal -I . aclocal: configure.in: 19: macro `AM_PROG_LIBTOOL' not found in library ERROR: Carefully read the error message and try to figure out what went wrong. address@hidden fluxbox]# apt-get install libtool Reading Package Lists... Done Building Dependency Tree... Done The following NEW packages will be installed: libtool 0 packages upgraded, 1 newly installed, 0 removed and 2 not upgraded. Need to get 478kB of archives. After unpacking 1584kB of additional disk space will be used. Get:1 http://ayo.freshrpms.net redhat/9/i386/os libtool 1.4.3-5 [478kB] Fetched 478kB in 4s (112kB/s) Executing RPM (-Uvh)... Preparing... ########################################### [100%] 1:libtool ########################################### [100%] address@hidden fluxbox]# ./autogen.sh Executing: aclocal -I . Executing: autoheader Executing: automake -a src/FbTk/Makefile.am: installing `./depcomp' Executing: autoconf Success, now continue with ./configure Use configure --help for detailed help. address@hidden fluxbox]# ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes /root/fluxbox/missing: Unknown `--run' option Try `/root/fluxbox/missing --help' for more information configure: WARNING: `missing' script is too old or missing checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gcc... no checking for cc... no checking for cc... no checking for cl... no configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. address@hidden fluxbox]# apt-get install gcc Reading Package Lists... Done Building Dependency Tree... Done The following NEW packages will be installed: gcc 0 packages upgraded, 1 newly installed, 0 removed and 2 not upgraded. Need to get 4518kB of archives. After unpacking 11.6MB of additional disk space will be used. Get:1 http://ayo.freshrpms.net redhat/9/i386/os gcc 3.2.2-5 [4518kB] Fetched 4518kB in 30s (150kB/s) Executing RPM (-Uvh)... Preparing... ########################################### [100%] 1:gcc ########################################### [100%] address@hidden fluxbox]# ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes /root/fluxbox/missing: Unknown `--run' option Try `/root/fluxbox/missing --help' for more information configure: WARNING: `missing' script is too old or missing checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for g++... no checking for c++... no checking for gpp... no checking for aCC... no checking for CC... no checking for cxx... no checking for cc++... no checking for cl... no checking for FCC... no checking for KCC... no checking for RCC... no checking for xlC_r... no checking for xlC... no checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking dependency style of g++... none checking for a BSD-compatible install... /usr/bin/install -c checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking for a sed that does not truncate output... /bin/sed checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking command to parse /usr/bin/nm -B output... failed checking how to run the C++ preprocessor... /lib/cpp checking for egrep... grep -E checking for ANSI C header files... no checking for sys/types.h... no checking for sys/stat.h... no checking for stdlib.h... no checking for string.h... no checking for memory.h... no checking for strings.h... no checking for inttypes.h... no checking for stdint.h... no checking for unistd.h... no checking dlfcn.h usability... no checking dlfcn.h presence... yes configure: WARNING: dlfcn.h: present but cannot be compiled configure: WARNING: dlfcn.h: check for missing prerequisite headers? configure: WARNING: dlfcn.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for dlfcn.h... yes checking for ranlib... ranlib checking for strip... strip checking for objdir... .libs checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... no checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... no checking if we can lock with hard links... yes checking if gcc supports -fno-rtti -fno-exceptions... no checking whether the linker (/usr/bin/ld) supports shared libraries... yes checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking dynamic linker characteristics... GNU/Linux ld.so checking if libtool supports shared libraries... no checking whether to build shared libraries... no checking whether to build static libraries... yes creating libtool checking for sed... sed checking for ANSI C header files... (cached) no checking errno.h usability... no checking errno.h presence... yes configure: WARNING: errno.h: present but cannot be compiled configure: WARNING: errno.h: check for missing prerequisite headers? configure: WARNING: errno.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for errno.h... yes checking ctype.h usability... no checking ctype.h presence... yes configure: WARNING: ctype.h: present but cannot be compiled configure: WARNING: ctype.h: check for missing prerequisite headers? configure: WARNING: ctype.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for ctype.h... yes checking dirent.h usability... no checking dirent.h presence... yes configure: WARNING: dirent.h: present but cannot be compiled configure: WARNING: dirent.h: check for missing prerequisite headers? configure: WARNING: dirent.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for dirent.h... yes checking fcntl.h usability... no checking fcntl.h presence... yes configure: WARNING: fcntl.h: present but cannot be compiled configure: WARNING: fcntl.h: check for missing prerequisite headers? configure: WARNING: fcntl.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for fcntl.h... yes checking libgen.h usability... no checking libgen.h presence... yes configure: WARNING: libgen.h: present but cannot be compiled configure: WARNING: libgen.h: check for missing prerequisite headers? configure: WARNING: libgen.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for libgen.h... yes checking locale.h usability... no checking locale.h presence... yes configure: WARNING: locale.h: present but cannot be compiled configure: WARNING: locale.h: check for missing prerequisite headers? configure: WARNING: locale.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for locale.h... yes checking nl_types.h usability... no checking nl_types.h presence... yes configure: WARNING: nl_types.h: present but cannot be compiled configure: WARNING: nl_types.h: check for missing prerequisite headers? configure: WARNING: nl_types.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for nl_types.h... yes checking process.h usability... no checking process.h presence... no checking for process.h... no checking signal.h usability... no checking signal.h presence... yes configure: WARNING: signal.h: present but cannot be compiled configure: WARNING: signal.h: check for missing prerequisite headers? configure: WARNING: signal.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for signal.h... yes checking stdarg.h usability... no checking stdarg.h presence... yes configure: WARNING: stdarg.h: present but cannot be compiled configure: WARNING: stdarg.h: check for missing prerequisite headers? configure: WARNING: stdarg.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for stdarg.h... yes checking stdio.h usability... no checking stdio.h presence... yes configure: WARNING: stdio.h: present but cannot be compiled configure: WARNING: stdio.h: check for missing prerequisite headers? configure: WARNING: stdio.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for stdio.h... yes checking time.h usability... no checking time.h presence... yes configure: WARNING: time.h: present but cannot be compiled configure: WARNING: time.h: check for missing prerequisite headers? configure: WARNING: time.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for time.h... yes checking for unistd.h... (cached) no checking sys/param.h usability... no checking sys/param.h presence... yes configure: WARNING: sys/param.h: present but cannot be compiled configure: WARNING: sys/param.h: check for missing prerequisite headers? configure: WARNING: sys/param.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for sys/param.h... yes checking sys/select.h usability... no checking sys/select.h presence... yes configure: WARNING: sys/select.h: present but cannot be compiled configure: WARNING: sys/select.h: check for missing prerequisite headers? configure: WARNING: sys/select.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for sys/select.h... yes checking sys/signal.h usability... no checking sys/signal.h presence... yes configure: WARNING: sys/signal.h: present but cannot be compiled configure: WARNING: sys/signal.h: check for missing prerequisite headers? configure: WARNING: sys/signal.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for sys/signal.h... yes checking for sys/stat.h... (cached) no checking sys/time.h usability... no checking sys/time.h presence... yes configure: WARNING: sys/time.h: present but cannot be compiled configure: WARNING: sys/time.h: check for missing prerequisite headers? configure: WARNING: sys/time.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for sys/time.h... yes checking for sys/types.h... (cached) no checking sys/wait.h usability... no checking sys/wait.h presence... yes configure: WARNING: sys/wait.h: present but cannot be compiled configure: WARNING: sys/wait.h: check for missing prerequisite headers? configure: WARNING: sys/wait.h: proceeding with the preprocessor's result configure: WARNING: ## ------------------------------------ ## configure: WARNING: ## Report this to address@hidden ## configure: WARNING: ## ------------------------------------ ## checking for sys/wait.h... yes checking whether time.h and sys/time.h may both be included... no checking for basename... no checking for basename in -lgen... no checking for getpid... no checking for setlocale... no checking for sigaction... no checking for strcasestr... no checking for snprintf... no checking for vsnprintf... no checking for catopen... no checking for catgets... no checking for catclose... no checking for strftime... no checking for t_open in -lnsl... no checking for socket in -lsocket... no checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include checking for dnet_ntoa in -ldnet... no checking for dnet_ntoa in -ldnet_stub... no checking for gethostbyname... no checking for gethostbyname in -lnsl... no checking for gethostbyname in -lbsd... no checking for connect... no checking for connect in -lsocket... no checking for remove... no checking for remove in -lposix... no checking for shmat... no checking for shmat in -lipc... no checking for IceConnectionNumber in -lICE... no checking for XOpenDisplay in -lX11... no configure: error: Could not find XOpenDisplay in -lX11. address@hidden fluxbox]# Failure is not an option. It's an embedded M$ app.