PASS: yaccvpath.test

[robert]

THe latest version of Bison is installed.


PASS: version5.test
PASS: version6.test
PASS: vpath.test
PASS: vtexi.test
PASS: vtexi2.test
PASS: warnopts.test
PASS: werror.test
PASS: whoami.test
PASS: xsource.test
PASS: yacc.test
PASS: yacc2.test
PASS: yacc3.test
PASS: yacc4.test
PASS: yacc5.test
PASS: yacc6.test
PASS: yacc7.test
PASS: yacc8.test
PASS: yaccpp.test
PASS: yaccvpath.test
=====================================
1 of 406 tests failed
(51 tests were not run)
Please report to address@hidden
=====================================
*** Error code 1

Stop in /home/tools/automake-1.7.5/tests (line 658 of Makefile).
*** Error code 1

Stop in /home/tools/automake-1.7.5/tests (line 692 of Makefile).
*** Error code 1

Stop in /home/tools/automake-1.7.5 (line 313 of Makefile).




OpenBSD 3.3 (GENERIC) #44: Sat Mar 29 13:22:05 MST 2003
    address@hidden:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class, 128KB L2
cache) 733 MHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 266907648 (260652K)
avail mem = 241664000 (236000K)
using 3283 buffers containing 13447168 bytes (13132K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/16/01, BIOS32 rev. 0 @
0xfd890 apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd890/0x770
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev
0x00) pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xe0000/0x1000! 0xe1000/0x3000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810" rev 0x03: rng active,
342Kb/sec vga1 at pci0 dev 1 function 0 "Intel 82810 Graphics" rev 0x03:
aperture at 0xf8000000, size 0x4000000 wsdisplay0 at vga1: console
(80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02 pci1
at ppb0 bus 1
clct0 at pci1 dev 6 function 0 "Cirrus Logic CS4281 CrystalClear Audio"
rev 0x01 irq 9 ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at clct0
rl0 at pci1 dev 14 function 0 "Accton Technology MPX 5030/5038" rev
0x10: irq 11 address 00:04:e2:0a:19:34 rlphy0 at rl0 phy 0: RTL internal
phy
pcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility wd0
at pciide0 channel 0 drive 0: <Maxtor 32049H2>
wd0: 16-sector PIO, LBA, 19541MB, 16383 cyl, 16 head, 63 sec, 40021632
sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SC-148, ST03> SCSI0
5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 9 usb0
at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c240 netmask ca40 ttymask cac2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302