[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: undefined reference to `__strtoll'

From: Bob Proulx
Subject: Re: undefined reference to `__strtoll'
Date: Thu, 11 Feb 2010 14:43:12 -0700
User-agent: Mutt/1.5.18 (2008-05-17)

Greg Wooledge wrote:
> Dave Moore wrote:
> > Machine: hppa2.0w
> > OS: hpux11.00
> > Compiler: gcc
> > ...
> > My version of GCC is
> > > gcc -v
> > Using built-in specs.
> > Target: hppa64-hp-hpux11.00
> > Configured with: ../src/configure --enable-languages=c,c++
> > --prefix=/usr/local/pa20_64 --with-local-prefix=/usr/local/pa20_64
> > --with-gnu-as --with-as=/usr/local/pa20_64/bin/as --with-gnu-ld
> > --with-ld=/usr/local/pa20_64/bin/ld --disable-shared --disable-nls
> > --host=hppa64-hp-hpux11.00
> > Thread model: single
> > gcc version 4.0.0

Are you trying to compile a 32-bit executable or a 64-bit executable?
A 32-bit compile should work okay.  But a 64-bit compile /may/ have
problems.  You may be better off trying to compile a 32-bit

> I don't have an HP-UX 11.00 machine to test on, but:

I don't at this time either.  I used to though.  There is a known
problem on HP-UX concerning 64-bit compiles.  If the gcc installation
is trying to use the system header files then this would probably
trickle through.  The default compilation mode is 32-bit and 32-bit
builds compile okay.  But a define in <inttypes.h> is upside-down and
is broken in 64-bit mode.  From coreutils notes I have the following
patch to the HP-UX system files (use at your own risk) to fix the

  --- /usr/include/inttypes.h.orig    Thu May 30 01:00:00 1996
  +++ /usr/include/inttypes.h         Sun Mar 23 00:20:36 2003
  @@ -489 +489 @@
  -#ifndef __STDC_32_MODE__
  +#ifndef __LP64__

As I recall in 64-bit mode all of the strtoull et al routines are
broken without this fix.  It might have eventually gotten fixed
upstream in some later 11.x release by this late date but I don't
know.  But the problem as reported seems like it may be related.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]