bug-cvs
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Automation E-News (2002/05/06)


From: Automation E-News
Subject: Automation E-News (2002/05/06)
Date: Mon, 6 May 2002 09:11:44 +0800

AutomationNews   2002/05/06

Reference from  JS automation corp. 

Motion Control Card Series

   

MPC-3004

4-axis Motion Control Card
Servo/Stepping Motor Control

Features

。4-axis servo/stepping motor control
。Single or dual-pulse mode
。Pulse range: 1pps ~1M pps.
。Special purpose I/O (LS+, LS-, HOME)
。8 D/I and 8 D/O channels
。Scale ratio formula
。Hardware backlash compensator
。Software limit function
。Software key function

==================================================

MPC-3013

3-axis Motion Control Card
Coordinate Measuring Machine Motion Control

Features

。3-axis servo/stepping motor control
。Single or dual-pulse mode
。Pulse range: 1pps~1M pps.
。3-axis linear interpolation
。Accept 3 linear scale feedback
。2 encoder input for pulse handler
。Special purpose I/O(LS+, LS-, HOME)
。2 D/I and 2 D/O channels
。4 channel A/D input for joystick and speed * * override
。20 key input
。10 LED status output
。Renishaw probe trigger input
。Programmable bounce back at probe trigger
。Scale ratio formula
。Hardware backlash compensator
。Software limit function

==================================================

MPC-3024

4-axis Motion Control Card
Servo/Stepping Motor Control

Features

。4-axis servo/stepping motor control
。Pulse output rate up to 6.55 MHz
。Pulse output options: OUT/DIR, CW/CCW
。2~4 axes linear interpolation
。Any 2 of 4 axes circular interpolation
。Continuous interpolation
。Change position or speed on-the-fly
。High speed position latch function
。Programmable acceleration and deceleration time
。Trapezoidal and S-curve velocity profiles
。28-bit up/down counter for incremental   
encoder
。Simultaneously start/stop on multiple axes
。Programmable interrupt conditions
。Hardware backlash compensator
。Software limit function
。Manual pulser input interface

==================================================

If you received this letter by mistake please click Unsubscribe


reply via email to

[Prev in Thread] Current Thread [Next in Thread]