|
From: | Steve Gere |
Subject: | Sun Unix vs Linux dd command |
Date: | Tue, 12 Jun 2001 09:06:46 -0400 |
dd if=/dev/rmt/0n of=/burn1/mike/YYMMDD.prep
bs=512
dd if=/dev/rmt/0n of=/burn1/mike/YYMMDD.out bs=512 These are the Sun commands. In Linux I
used
dd if=/dev/st0 of=/DLT/USapps/YYMMDD.prep
bs=512
dd if=/dev/st0 of=/DLT/USapps/YYMMDD.out
bs=512
I got "3+0 records in
3+0 records out"
but not the 2 files on the DLT.
I got recognition of the DLT, a header data read, and this data was
extracted:
OL1P00007
1= SUN
Mdl = DLT7000 Address = 0 Modename = No name Modesel = 00 00 10 08 00 00 00 00 00 00 02 00 Blocksize = 512 Drive type = streamer Section = Changer
n = Changer HDR1PGPUBS.20010426 P0000700010001000100001109002109 000000NOVAXCHANGE HDR2U0051200512 0 00 It was suggested that in Linux I look for a non-rewind device. Can you
point me to a source for assistance in properly configuring this tape data
extraction? I realize you are a debugging professional and not an instructor,
per se, and I thank you in advance for any assistance you can give me. Steve
Gere
|
[Prev in Thread] | Current Thread | [Next in Thread] |