bug-gnulib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 2/6] Make autogen a shell function too


From: Paul Eggert
Subject: [PATCH 2/6] Make autogen a shell function too
Date: Tue, 27 Dec 2022 10:59:58 -0800

This does not change behavior.  It is helpful for future changes.
* top/autogen.sh: Call autogen to do the actual work.
(usage, version_controlled_file, gitignore_entries, insert_if_absent):
(insert_vc_ignore, symlink_to_dir): Move to top/bootstrap-funclib.sh.
* top/bootstrap-funclib.sh (autogen_usage): Rename from ‘usage’.
(autogen): New function, containing the top level of the
old top/autogen.sh.
---
 ChangeLog                |  11 +
 build-aux/bootstrap      | 451 ++++++++++++++++++++++++++++++++++++++-
 top/autogen.sh           | 449 +-------------------------------------
 top/bootstrap-funclib.sh | 451 ++++++++++++++++++++++++++++++++++++++-
 4 files changed, 912 insertions(+), 450 deletions(-)

diff --git a/ChangeLog b/ChangeLog
index c5de4b0809..3fd73f3f74 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,14 @@
+2022-12-27  Paul Eggert  <eggert@cs.ucla.edu>
+
+       Make autogen a shell function too
+       This does not change behavior.  It is helpful for future changes.
+       * top/autogen.sh: Call autogen to do the actual work.
+       (usage, version_controlled_file, gitignore_entries, insert_if_absent):
+       (insert_vc_ignore, symlink_to_dir): Move to top/bootstrap-funclib.sh.
+       * top/bootstrap-funclib.sh (autogen_usage): Rename from ‘usage’.
+       (autogen): New function, containing the top level of the
+       old top/autogen.sh.
+
 2022-12-27  Bruno Haible  <bruno@clisp.org>
 
        Fix compilation errors in C++ mode on Solaris 11 OpenIndiana.
diff --git a/build-aux/bootstrap b/build-aux/bootstrap
index d94605dd44..c7566e824b 100755
--- a/build-aux/bootstrap
+++ b/build-aux/bootstrap
@@ -39,7 +39,7 @@ medir=`dirname "$me"`
 
 # A library of shell functions for autopull.sh, autogen.sh, and bootstrap.
 
-scriptversion=2022-12-27.03; # UTC
+scriptversion=2022-12-27.16; # UTC
 
 # Copyright (C) 2003-2022 Free Software Foundation, Inc.
 #
@@ -622,6 +622,455 @@ else
   use_gnulib=true
 fi
 
+
+# -------- Generate files automatically from existing sources.  --------------
+
+autogen_usage() {
+  cat <<EOF
+Usage: $me [OPTION]...
+Bootstrap this package from the checked-out sources.
+
+Optional environment variables:
+  GNULIB_SRCDIR            Specifies the local directory where gnulib
+                           sources reside.  Use this if you already
+                           have gnulib sources on your machine, and
+                           you want to use these sources.
+
+Options:
+  --copy                   copy files instead of creating symbolic links
+  --force                  attempt to bootstrap even if the sources seem
+                           not to have been checked out
+EOF
+  bootstrap_print_option_usage_hook
+  cat <<EOF
+If the file bootstrap.conf exists in the same directory as this script, its
+contents are read as shell variables to configure the bootstrap.
+
+For build prerequisites, environment variables like \$AUTOCONF and \$AMTAR
+are honored.
+
+Gnulib sources are assumed to be present:
+  * in \$GNULIB_SRCDIR, if that environment variable is set,
+  * otherwise, in the 'gnulib' submodule, if such a submodule is configured,
+  * otherwise, in the 'gnulib' subdirectory.
+
+Running without arguments will suffice in most cases.
+EOF
+}
+
+
+version_controlled_file() {
+  parent=$1
+  file=$2
+  if test -d .git; then
+    git rm -n "$file" > /dev/null 2>&1
+  elif test -d .svn; then
+    svn log -r HEAD "$file" > /dev/null 2>&1
+  elif test -d CVS; then
+    grep -F "/${file##*/}/" "$parent/CVS/Entries" 2>/dev/null |
+             grep '^/[^/]*/[0-9]' > /dev/null
+  else
+    warn_ "no version control for $file?"
+    false
+  fi
+}
+
+# Strip blank and comment lines to leave significant entries.
+gitignore_entries() {
+  sed '/^#/d; /^$/d' "$@"
+}
+
+# If $STR is not already on a line by itself in $FILE, insert it at the start.
+# Entries are inserted at the start of the ignore list to ensure existing
+# entries starting with ! are not overridden.  Such entries support
+# whitelisting exceptions after a more generic blacklist pattern.
+insert_if_absent() {
+  file=$1
+  str=$2
+  test -f $file || touch $file
+  test -r $file || die "Error: failed to read ignore file: $file"
+  duplicate_entries=$(gitignore_entries $file | sort | uniq -d)
+  if [ "$duplicate_entries" ] ; then
+    die "Error: Duplicate entries in $file: " $duplicate_entries
+  fi
+  linesold=$(gitignore_entries $file | wc -l)
+  linesnew=$( { echo "$str"; cat $file; } | gitignore_entries | sort -u | wc 
-l)
+  if [ $linesold != $linesnew ] ; then
+    { echo "$str" | cat - $file > $file.bak && mv $file.bak $file; } \
+      || die "insert_if_absent $file $str: failed"
+  fi
+}
+
+# Adjust $PATTERN for $VC_IGNORE_FILE and insert it with
+# insert_if_absent.
+insert_vc_ignore() {
+  vc_ignore_file="$1"
+  pattern="$2"
+  case $vc_ignore_file in
+  *.gitignore)
+    # A .gitignore entry that does not start with '/' applies
+    # recursively to subdirectories, so prepend '/' to every
+    # .gitignore entry.
+    pattern=$(echo "$pattern" | sed s,^,/,);;
+  esac
+  insert_if_absent "$vc_ignore_file" "$pattern"
+}
+
+symlink_to_dir()
+{
+  src=$1/$2
+  dst=${3-$2}
+
+  test -f "$src" && {
+
+    # If the destination directory doesn't exist, create it.
+    # This is required at least for "lib/uniwidth/cjk.h".
+    dst_dir=$(dirname "$dst")
+    if ! test -d "$dst_dir"; then
+      mkdir -p "$dst_dir"
+
+      # If we've just created a directory like lib/uniwidth,
+      # tell version control system(s) it's ignorable.
+      # FIXME: for now, this does only one level
+      parent=$(dirname "$dst_dir")
+      for dot_ig in x $vc_ignore; do
+        test $dot_ig = x && continue
+        ig=$parent/$dot_ig
+        insert_vc_ignore $ig "${dst_dir##*/}"
+      done
+    fi
+
+    if $copy; then
+      {
+        test ! -h "$dst" || {
+          echo "$me: rm -f $dst" &&
+          rm -f "$dst"
+        }
+      } &&
+      test -f "$dst" &&
+      cmp -s "$src" "$dst" || {
+        echo "$me: cp -fp $src $dst" &&
+        cp -fp "$src" "$dst"
+      }
+    else
+      # Leave any existing symlink alone, if it already points to the source,
+      # so that broken build tools that care about symlink times
+      # aren't confused into doing unnecessary builds.  Conversely, if the
+      # existing symlink's timestamp is older than the source, make it afresh,
+      # so that broken tools aren't confused into skipping needed builds.  See
+      # <https://lists.gnu.org/r/bug-gnulib/2011-05/msg00326.html>.
+      test -h "$dst" &&
+      src_ls=$(ls -diL "$src" 2>/dev/null) && set $src_ls && src_i=$1 &&
+      dst_ls=$(ls -diL "$dst" 2>/dev/null) && set $dst_ls && dst_i=$1 &&
+      test "$src_i" = "$dst_i" &&
+      both_ls=$(ls -dt "$src" "$dst") &&
+      test "X$both_ls" = "X$dst$nl$src" || {
+        dot_dots=
+        case $src in
+        /*) ;;
+        *)
+          case /$dst/ in
+          *//* | */../* | */./* | /*/*/*/*/*/)
+             die "invalid symlink calculation: $src -> $dst";;
+          /*/*/*/*/)    dot_dots=../../../;;
+          /*/*/*/)      dot_dots=../../;;
+          /*/*/)        dot_dots=../;;
+          esac;;
+        esac
+
+        echo "$me: ln -fs $dot_dots$src $dst" &&
+        ln -fs "$dot_dots$src" "$dst"
+      }
+    fi
+  }
+}
+
+# Regenerate all autogeneratable files that are omitted from the
+# version control repository.  In particular, regenerate all
+# aclocal.m4, config.h.in, Makefile.in, configure files with new
+# versions of autoconf or automake.
+autogen()
+{
+  # Ensure that CDPATH is not set.  Otherwise, the output from cd
+  # would cause trouble in at least one use below.
+  (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+  # Environment variables that may be set by the user.
+  : "${AUTOPOINT=autopoint}"
+  : "${AUTORECONF=autoreconf}"
+
+  if test "$vc_ignore" = auto; then
+    vc_ignore=
+    test -d .git && vc_ignore=.gitignore
+    test -d CVS && vc_ignore="$vc_ignore .cvsignore"
+  fi
+
+
+  # Parse options.
+
+  # Whether to use copies instead of symlinks.
+  copy=false
+
+  for option
+  do
+    case $option in
+    --help)
+      autogen_usage
+      return;;
+    --version)
+      set -e
+      echo "autogen.sh $scriptversion"
+      echo "$copyright"
+      return 0
+      ;;
+    --force)
+      checkout_only_file=;;
+    --copy)
+      copy=true;;
+    *)
+      bootstrap_option_hook $option || die "$option: unknown option";;
+    esac
+  done
+
+  test -z "$GNULIB_SRCDIR" || test -d "$GNULIB_SRCDIR" \
+    || die "Error: \$GNULIB_SRCDIR environment variable or --gnulib-srcdir 
option is specified, but does not denote a directory"
+
+  if test -n "$checkout_only_file" && test ! -r "$checkout_only_file"; then
+    die "Running this script from a non-checked-out distribution is risky."
+  fi
+
+  if $use_gnulib; then
+    if test -z "$GNULIB_SRCDIR"; then
+      gnulib_path=$(test -f .gitmodules && git config --file .gitmodules 
submodule.gnulib.path)
+      test -z "$gnulib_path" && gnulib_path=gnulib
+      GNULIB_SRCDIR=$gnulib_path
+    fi
+  fi
+
+  # Die if there is no AC_CONFIG_AUX_DIR($build_aux) line in configure.ac.
+  found_aux_dir=no
+  grep '^[      ]*AC_CONFIG_AUX_DIR(\['"$build_aux"'])' configure.ac \
+      >/dev/null && found_aux_dir=yes
+  grep '^[      ]*AC_CONFIG_AUX_DIR('"$build_aux"')' configure.ac \
+      >/dev/null && found_aux_dir=yes
+  test $found_aux_dir = yes \
+    || die "configure.ac lacks 'AC_CONFIG_AUX_DIR([$build_aux])'; add it"
+
+  # If $build_aux doesn't exist, create it now, otherwise some bits
+  # below will malfunction.  If creating it, also mark it as ignored.
+  if test ! -d $build_aux; then
+    mkdir $build_aux
+    for dot_ig in x $vc_ignore; do
+      test $dot_ig = x && continue
+      insert_vc_ignore $dot_ig $build_aux
+    done
+  fi
+
+  check_build_prerequisites false
+
+  use_libtool=0
+  # We'd like to use grep -E, to see if any of LT_INIT,
+  # AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac,
+  # but that's not portable enough (e.g., for Solaris).
+  grep '^[      ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \
+    && use_libtool=1
+  grep '^[      ]*LT_INIT' configure.ac >/dev/null \
+    && use_libtool=1
+  if test $use_libtool = 1; then
+    find_tool LIBTOOLIZE glibtoolize libtoolize
+  fi
+
+  if $use_gnulib; then
+    gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
+    <$gnulib_tool || return
+  fi
+
+  # NOTE: we have to be careful to run both autopoint and libtoolize
+  # before gnulib-tool, since gnulib-tool is likely to provide newer
+  # versions of files "installed" by these two programs.
+  # Then, *after* gnulib-tool (see below), we have to be careful to
+  # run autoreconf in such a way that it does not run either of these
+  # two just-pre-run programs.
+
+  # Import from gettext.
+  with_gettext=yes
+  grep '^[      ]*AM_GNU_GETTEXT_VERSION(' configure.ac >/dev/null || \
+      with_gettext=no
+
+  if test $with_gettext = yes || test $use_libtool = 1; then
+
+    tempbase=.bootstrap$$
+    trap "rm -f $tempbase.0 $tempbase.1" HUP INT PIPE TERM
+
+    > $tempbase.0 > $tempbase.1 &&
+    find . ! -type d -print | sort > $tempbase.0 || return
+
+    if test $with_gettext = yes; then
+      # Released autopoint has the tendency to install macros that have been
+      # obsoleted in current gnulib, so run this before gnulib-tool.
+      echo "$0: $AUTOPOINT --force"
+      $AUTOPOINT --force || return
+    fi
+
+    # Autoreconf runs aclocal before libtoolize, which causes spurious
+    # warnings if the initial aclocal is confused by the libtoolized
+    # (or worse out-of-date) macro directory.
+    # libtoolize 1.9b added the --install option; but we support back
+    # to libtoolize 1.5.22, where the install action was default.
+    if test $use_libtool = 1; then
+      install=
+      case $($LIBTOOLIZE --help) in
+        *--install*) install=--install ;;
+      esac
+      echo "running: $LIBTOOLIZE $install --copy"
+      $LIBTOOLIZE $install --copy
+    fi
+
+    find . ! -type d -print | sort >$tempbase.1
+    old_IFS=$IFS
+    IFS=$nl
+    for file in $(comm -13 $tempbase.0 $tempbase.1); do
+      IFS=$old_IFS
+      parent=${file%/*}
+      version_controlled_file "$parent" "$file" || {
+        for dot_ig in x $vc_ignore; do
+          test $dot_ig = x && continue
+          ig=$parent/$dot_ig
+          insert_vc_ignore "$ig" "${file##*/}"
+        done
+      }
+    done
+    IFS=$old_IFS
+
+    rm -f $tempbase.0 $tempbase.1
+    trap - HUP INT PIPE TERM
+  fi
+
+  # Import from gnulib.
+
+  if $use_gnulib; then
+    gnulib_tool_options="\
+     --no-changelog\
+     --aux-dir=$build_aux\
+     --doc-base=$doc_base\
+     --lib=$gnulib_name\
+     --m4-base=$m4_base/\
+     --source-base=$source_base/\
+     --tests-base=$tests_base\
+     --local-dir=$local_gl_dir\
+     $gnulib_tool_option_extras\
+    "
+    if test $use_libtool = 1; then
+      case "$gnulib_tool_options " in
+        *' --libtool '*) ;;
+        *) gnulib_tool_options="$gnulib_tool_options --libtool" ;;
+      esac
+    fi
+    echo "$0: $gnulib_tool $gnulib_tool_options --import ..."
+    $gnulib_tool $gnulib_tool_options --import $gnulib_modules \
+      || die "gnulib-tool failed"
+
+    for file in $gnulib_files; do
+      symlink_to_dir "$GNULIB_SRCDIR" $file \
+        || die "failed to symlink $file"
+    done
+  fi
+
+  bootstrap_post_import_hook \
+    || die "bootstrap_post_import_hook failed"
+
+  # Remove any dangling symlink matching "*.m4" or "*.[ch]" in some
+  # gnulib-populated directories.  Such .m4 files would cause aclocal to fail.
+  # The following requires GNU find 4.2.3 or newer.  Considering the usual
+  # portability constraints of this script, that may seem a very demanding
+  # requirement, but it should be ok.  Ignore any failure, which is fine,
+  # since this is only a convenience to help developers avoid the relatively
+  # unusual case in which a symlinked-to .m4 file is git-removed from gnulib
+  # between successive runs of this script.
+  find "$m4_base" "$source_base" \
+    -depth \( -name '*.m4' -o -name '*.[ch]' \) \
+    -type l -xtype l -delete > /dev/null 2>&1
+
+  # Invoke autoreconf with --force --install to ensure upgrades of tools
+  # such as ylwrap.
+  AUTORECONFFLAGS="--verbose --install --force -I $m4_base $ACLOCAL_FLAGS"
+
+  # Some systems (RHEL 5) are using ancient autotools, for which the
+  # --no-recursive option had not been invented.  Detect that lack and
+  # omit the option when it's not supported.  FIXME in 2017: remove this
+  # hack when RHEL 5 autotools are updated, or when they become irrelevant.
+  case $($AUTORECONF --help) in
+    *--no-recursive*) AUTORECONFFLAGS="$AUTORECONFFLAGS --no-recursive";;
+  esac
+
+  # Tell autoreconf not to invoke autopoint or libtoolize; they were run above.
+  echo "running: AUTOPOINT=true LIBTOOLIZE=true $AUTORECONF $AUTORECONFFLAGS"
+  AUTOPOINT=true LIBTOOLIZE=true $AUTORECONF $AUTORECONFFLAGS \
+    || die "autoreconf failed"
+
+  # Get some extra files from gnulib, overriding existing files.
+  for file in $gnulib_extra_files; do
+    case $file in
+      */INSTALL) dst=INSTALL;;
+      build-aux/*) dst=$build_aux/${file#build-aux/};;
+      *) dst=$file;;
+    esac
+    symlink_to_dir "$GNULIB_SRCDIR" $file $dst \
+      || die "failed to symlink $file"
+  done
+
+  if test $with_gettext = yes; then
+    # Create gettext configuration.
+    echo "$0: Creating po/Makevars from po/Makevars.template ..."
+    rm -f po/Makevars
+    sed '
+      /^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
+      /^COPYRIGHT_HOLDER *=/s/=.*/= '"$COPYRIGHT_HOLDER"'/
+      /^MSGID_BUGS_ADDRESS *=/s|=.*|= '"$MSGID_BUGS_ADDRESS"'|
+      /^XGETTEXT_OPTIONS *=/{
+        s/$/ \\/
+        a\
+            '"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
+      }
+    ' po/Makevars.template >po/Makevars \
+      || die 'cannot generate po/Makevars'
+
+    # If the 'gettext' module is in use, grab the latest Makefile.in.in.
+    # If only the 'gettext-h' module is in use, assume autopoint already
+    # put the correct version of this file into place.
+    case $gnulib_modules in
+      *gettext-h*) ;;
+      *gettext*)
+        cp $GNULIB_SRCDIR/build-aux/po/Makefile.in.in po/Makefile.in.in \
+          || die "cannot create po/Makefile.in.in"
+        ;;
+    esac
+
+    if test -d runtime-po; then
+      # Similarly for runtime-po/Makevars, but not quite the same.
+      rm -f runtime-po/Makevars
+      sed '
+        /^DOMAIN *=.*/s/=.*/= '"$package"'-runtime/
+        /^subdir *=.*/s/=.*/= runtime-po/
+        /^MSGID_BUGS_ADDRESS *=/s/=.*/= bug-'"$package"'@gnu.org/
+        /^XGETTEXT_OPTIONS *=/{
+          s/$/ \\/
+          a\
+              '"$XGETTEXT_OPTIONS_RUNTIME"' $${end_of_xgettext_options+}
+        }
+      ' po/Makevars.template >runtime-po/Makevars \
+      || die 'cannot generate runtime-po/Makevars'
+
+      # Copy identical files from po to runtime-po.
+      (cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po)
+    fi
+  fi
+
+  bootstrap_epilogue
+
+  echo "$0: done.  Now you can run './configure'."
+}
+
 # ----------------------------------------------------------------------------
 
 # Local Variables:
diff --git a/top/autogen.sh b/top/autogen.sh
index 4ca4c05577..1cb918640d 100755
--- a/top/autogen.sh
+++ b/top/autogen.sh
@@ -4,8 +4,6 @@
 # also regenerates all aclocal.m4, config.h.in, Makefile.in, configure files
 # with new versions of autoconf or automake.
 
-scriptversion=2022-12-27.03; # UTC
-
 # Copyright (C) 2003-2022 Free Software Foundation, Inc.
 #
 # This program is free software: you can redistribute it and/or modify
@@ -38,449 +36,4 @@ medir=`dirname "$me"`
 # Read the function library and the configuration.
 . "$medir"/bootstrap-funclib.sh
 
-# Ensure that CDPATH is not set.  Otherwise, the output from cd
-# would cause trouble in at least one use below.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Environment variables that may be set by the user.
-: "${AUTOPOINT=autopoint}"
-: "${AUTORECONF=autoreconf}"
-
-if test "$vc_ignore" = auto; then
-  vc_ignore=
-  test -d .git && vc_ignore=.gitignore
-  test -d CVS && vc_ignore="$vc_ignore .cvsignore"
-fi
-
-usage() {
-  cat <<EOF
-Usage: $me [OPTION]...
-Bootstrap this package from the checked-out sources.
-
-Optional environment variables:
-  GNULIB_SRCDIR            Specifies the local directory where gnulib
-                           sources reside.  Use this if you already
-                           have gnulib sources on your machine, and
-                           you want to use these sources.
-
-Options:
-  --copy                   copy files instead of creating symbolic links
-  --force                  attempt to bootstrap even if the sources seem
-                           not to have been checked out
-EOF
-  bootstrap_print_option_usage_hook
-  cat <<EOF
-If the file bootstrap.conf exists in the same directory as this script, its
-contents are read as shell variables to configure the bootstrap.
-
-For build prerequisites, environment variables like \$AUTOCONF and \$AMTAR
-are honored.
-
-Gnulib sources are assumed to be present:
-  * in \$GNULIB_SRCDIR, if that environment variable is set,
-  * otherwise, in the 'gnulib' submodule, if such a submodule is configured,
-  * otherwise, in the 'gnulib' subdirectory.
-
-Running without arguments will suffice in most cases.
-EOF
-}
-
-# Parse options.
-
-# Whether to use copies instead of symlinks.
-copy=false
-
-for option
-do
-  case $option in
-  --help)
-    usage
-    exit;;
-  --version)
-    set -e
-    echo "autogen.sh $scriptversion"
-    echo "$copyright"
-    exit 0
-    ;;
-  --force)
-    checkout_only_file=;;
-  --copy)
-    copy=true;;
-  *)
-    bootstrap_option_hook $option || die "$option: unknown option";;
-  esac
-done
-
-test -z "$GNULIB_SRCDIR" || test -d "$GNULIB_SRCDIR" \
-  || die "Error: \$GNULIB_SRCDIR environment variable or --gnulib-srcdir 
option is specified, but does not denote a directory"
-
-if test -n "$checkout_only_file" && test ! -r "$checkout_only_file"; then
-  die "Running this script from a non-checked-out distribution is risky."
-fi
-
-if $use_gnulib; then
-  if test -z "$GNULIB_SRCDIR"; then
-    gnulib_path=$(test -f .gitmodules && git config --file .gitmodules 
submodule.gnulib.path)
-    test -z "$gnulib_path" && gnulib_path=gnulib
-    GNULIB_SRCDIR=$gnulib_path
-  fi
-fi
-
-version_controlled_file() {
-  parent=$1
-  file=$2
-  if test -d .git; then
-    git rm -n "$file" > /dev/null 2>&1
-  elif test -d .svn; then
-    svn log -r HEAD "$file" > /dev/null 2>&1
-  elif test -d CVS; then
-    grep -F "/${file##*/}/" "$parent/CVS/Entries" 2>/dev/null |
-             grep '^/[^/]*/[0-9]' > /dev/null
-  else
-    warn_ "no version control for $file?"
-    false
-  fi
-}
-
-# Strip blank and comment lines to leave significant entries.
-gitignore_entries() {
-  sed '/^#/d; /^$/d' "$@"
-}
-
-# If $STR is not already on a line by itself in $FILE, insert it at the start.
-# Entries are inserted at the start of the ignore list to ensure existing
-# entries starting with ! are not overridden.  Such entries support
-# whitelisting exceptions after a more generic blacklist pattern.
-insert_if_absent() {
-  file=$1
-  str=$2
-  test -f $file || touch $file
-  test -r $file || die "Error: failed to read ignore file: $file"
-  duplicate_entries=$(gitignore_entries $file | sort | uniq -d)
-  if [ "$duplicate_entries" ] ; then
-    die "Error: Duplicate entries in $file: " $duplicate_entries
-  fi
-  linesold=$(gitignore_entries $file | wc -l)
-  linesnew=$( { echo "$str"; cat $file; } | gitignore_entries | sort -u | wc 
-l)
-  if [ $linesold != $linesnew ] ; then
-    { echo "$str" | cat - $file > $file.bak && mv $file.bak $file; } \
-      || die "insert_if_absent $file $str: failed"
-  fi
-}
-
-# Adjust $PATTERN for $VC_IGNORE_FILE and insert it with
-# insert_if_absent.
-insert_vc_ignore() {
-  vc_ignore_file="$1"
-  pattern="$2"
-  case $vc_ignore_file in
-  *.gitignore)
-    # A .gitignore entry that does not start with '/' applies
-    # recursively to subdirectories, so prepend '/' to every
-    # .gitignore entry.
-    pattern=$(echo "$pattern" | sed s,^,/,);;
-  esac
-  insert_if_absent "$vc_ignore_file" "$pattern"
-}
-
-symlink_to_dir()
-{
-  src=$1/$2
-  dst=${3-$2}
-
-  test -f "$src" && {
-
-    # If the destination directory doesn't exist, create it.
-    # This is required at least for "lib/uniwidth/cjk.h".
-    dst_dir=$(dirname "$dst")
-    if ! test -d "$dst_dir"; then
-      mkdir -p "$dst_dir"
-
-      # If we've just created a directory like lib/uniwidth,
-      # tell version control system(s) it's ignorable.
-      # FIXME: for now, this does only one level
-      parent=$(dirname "$dst_dir")
-      for dot_ig in x $vc_ignore; do
-        test $dot_ig = x && continue
-        ig=$parent/$dot_ig
-        insert_vc_ignore $ig "${dst_dir##*/}"
-      done
-    fi
-
-    if $copy; then
-      {
-        test ! -h "$dst" || {
-          echo "$me: rm -f $dst" &&
-          rm -f "$dst"
-        }
-      } &&
-      test -f "$dst" &&
-      cmp -s "$src" "$dst" || {
-        echo "$me: cp -fp $src $dst" &&
-        cp -fp "$src" "$dst"
-      }
-    else
-      # Leave any existing symlink alone, if it already points to the source,
-      # so that broken build tools that care about symlink times
-      # aren't confused into doing unnecessary builds.  Conversely, if the
-      # existing symlink's timestamp is older than the source, make it afresh,
-      # so that broken tools aren't confused into skipping needed builds.  See
-      # <https://lists.gnu.org/r/bug-gnulib/2011-05/msg00326.html>.
-      test -h "$dst" &&
-      src_ls=$(ls -diL "$src" 2>/dev/null) && set $src_ls && src_i=$1 &&
-      dst_ls=$(ls -diL "$dst" 2>/dev/null) && set $dst_ls && dst_i=$1 &&
-      test "$src_i" = "$dst_i" &&
-      both_ls=$(ls -dt "$src" "$dst") &&
-      test "X$both_ls" = "X$dst$nl$src" || {
-        dot_dots=
-        case $src in
-        /*) ;;
-        *)
-          case /$dst/ in
-          *//* | */../* | */./* | /*/*/*/*/*/)
-             die "invalid symlink calculation: $src -> $dst";;
-          /*/*/*/*/)    dot_dots=../../../;;
-          /*/*/*/)      dot_dots=../../;;
-          /*/*/)        dot_dots=../;;
-          esac;;
-        esac
-
-        echo "$me: ln -fs $dot_dots$src $dst" &&
-        ln -fs "$dot_dots$src" "$dst"
-      }
-    fi
-  }
-}
-
-# Die if there is no AC_CONFIG_AUX_DIR($build_aux) line in configure.ac.
-found_aux_dir=no
-grep '^[        ]*AC_CONFIG_AUX_DIR(\['"$build_aux"'])' configure.ac \
-    >/dev/null && found_aux_dir=yes
-grep '^[        ]*AC_CONFIG_AUX_DIR('"$build_aux"')' configure.ac \
-    >/dev/null && found_aux_dir=yes
-test $found_aux_dir = yes \
-  || die "configure.ac lacks 'AC_CONFIG_AUX_DIR([$build_aux])'; add it"
-
-# If $build_aux doesn't exist, create it now, otherwise some bits
-# below will malfunction.  If creating it, also mark it as ignored.
-if test ! -d $build_aux; then
-  mkdir $build_aux
-  for dot_ig in x $vc_ignore; do
-    test $dot_ig = x && continue
-    insert_vc_ignore $dot_ig $build_aux
-  done
-fi
-
-check_build_prerequisites false
-
-use_libtool=0
-# We'd like to use grep -E, to see if any of LT_INIT,
-# AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac,
-# but that's not portable enough (e.g., for Solaris).
-grep '^[        ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \
-  && use_libtool=1
-grep '^[        ]*LT_INIT' configure.ac >/dev/null \
-  && use_libtool=1
-if test $use_libtool = 1; then
-  find_tool LIBTOOLIZE glibtoolize libtoolize
-fi
-
-if $use_gnulib; then
-  gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
-  <$gnulib_tool || exit $?
-fi
-
-# NOTE: we have to be careful to run both autopoint and libtoolize
-# before gnulib-tool, since gnulib-tool is likely to provide newer
-# versions of files "installed" by these two programs.
-# Then, *after* gnulib-tool (see below), we have to be careful to
-# run autoreconf in such a way that it does not run either of these
-# two just-pre-run programs.
-
-# Import from gettext.
-with_gettext=yes
-grep '^[        ]*AM_GNU_GETTEXT_VERSION(' configure.ac >/dev/null || \
-    with_gettext=no
-
-if test $with_gettext = yes || test $use_libtool = 1; then
-
-  tempbase=.bootstrap$$
-  trap "rm -f $tempbase.0 $tempbase.1" HUP INT PIPE TERM
-
-  > $tempbase.0 > $tempbase.1 &&
-  find . ! -type d -print | sort > $tempbase.0 || exit
-
-  if test $with_gettext = yes; then
-    # Released autopoint has the tendency to install macros that have been
-    # obsoleted in current gnulib, so run this before gnulib-tool.
-    echo "$0: $AUTOPOINT --force"
-    $AUTOPOINT --force || exit
-  fi
-
-  # Autoreconf runs aclocal before libtoolize, which causes spurious
-  # warnings if the initial aclocal is confused by the libtoolized
-  # (or worse out-of-date) macro directory.
-  # libtoolize 1.9b added the --install option; but we support back
-  # to libtoolize 1.5.22, where the install action was default.
-  if test $use_libtool = 1; then
-    install=
-    case $($LIBTOOLIZE --help) in
-      *--install*) install=--install ;;
-    esac
-    echo "running: $LIBTOOLIZE $install --copy"
-    $LIBTOOLIZE $install --copy
-  fi
-
-  find . ! -type d -print | sort >$tempbase.1
-  old_IFS=$IFS
-  IFS=$nl
-  for file in $(comm -13 $tempbase.0 $tempbase.1); do
-    IFS=$old_IFS
-    parent=${file%/*}
-    version_controlled_file "$parent" "$file" || {
-      for dot_ig in x $vc_ignore; do
-        test $dot_ig = x && continue
-        ig=$parent/$dot_ig
-        insert_vc_ignore "$ig" "${file##*/}"
-      done
-    }
-  done
-  IFS=$old_IFS
-
-  rm -f $tempbase.0 $tempbase.1
-  trap - HUP INT PIPE TERM
-fi
-
-# Import from gnulib.
-
-if $use_gnulib; then
-  gnulib_tool_options="\
-   --no-changelog\
-   --aux-dir=$build_aux\
-   --doc-base=$doc_base\
-   --lib=$gnulib_name\
-   --m4-base=$m4_base/\
-   --source-base=$source_base/\
-   --tests-base=$tests_base\
-   --local-dir=$local_gl_dir\
-   $gnulib_tool_option_extras\
-  "
-  if test $use_libtool = 1; then
-    case "$gnulib_tool_options " in
-      *' --libtool '*) ;;
-      *) gnulib_tool_options="$gnulib_tool_options --libtool" ;;
-    esac
-  fi
-  echo "$0: $gnulib_tool $gnulib_tool_options --import ..."
-  $gnulib_tool $gnulib_tool_options --import $gnulib_modules \
-    || die "gnulib-tool failed"
-
-  for file in $gnulib_files; do
-    symlink_to_dir "$GNULIB_SRCDIR" $file \
-      || die "failed to symlink $file"
-  done
-fi
-
-bootstrap_post_import_hook \
-  || die "bootstrap_post_import_hook failed"
-
-# Remove any dangling symlink matching "*.m4" or "*.[ch]" in some
-# gnulib-populated directories.  Such .m4 files would cause aclocal to fail.
-# The following requires GNU find 4.2.3 or newer.  Considering the usual
-# portability constraints of this script, that may seem a very demanding
-# requirement, but it should be ok.  Ignore any failure, which is fine,
-# since this is only a convenience to help developers avoid the relatively
-# unusual case in which a symlinked-to .m4 file is git-removed from gnulib
-# between successive runs of this script.
-find "$m4_base" "$source_base" \
-  -depth \( -name '*.m4' -o -name '*.[ch]' \) \
-  -type l -xtype l -delete > /dev/null 2>&1
-
-# Invoke autoreconf with --force --install to ensure upgrades of tools
-# such as ylwrap.
-AUTORECONFFLAGS="--verbose --install --force -I $m4_base $ACLOCAL_FLAGS"
-
-# Some systems (RHEL 5) are using ancient autotools, for which the
-# --no-recursive option had not been invented.  Detect that lack and
-# omit the option when it's not supported.  FIXME in 2017: remove this
-# hack when RHEL 5 autotools are updated, or when they become irrelevant.
-case $($AUTORECONF --help) in
-  *--no-recursive*) AUTORECONFFLAGS="$AUTORECONFFLAGS --no-recursive";;
-esac
-
-# Tell autoreconf not to invoke autopoint or libtoolize; they were run above.
-echo "running: AUTOPOINT=true LIBTOOLIZE=true $AUTORECONF $AUTORECONFFLAGS"
-AUTOPOINT=true LIBTOOLIZE=true $AUTORECONF $AUTORECONFFLAGS \
-  || die "autoreconf failed"
-
-# Get some extra files from gnulib, overriding existing files.
-for file in $gnulib_extra_files; do
-  case $file in
-    */INSTALL) dst=INSTALL;;
-    build-aux/*) dst=$build_aux/${file#build-aux/};;
-    *) dst=$file;;
-  esac
-  symlink_to_dir "$GNULIB_SRCDIR" $file $dst \
-    || die "failed to symlink $file"
-done
-
-if test $with_gettext = yes; then
-  # Create gettext configuration.
-  echo "$0: Creating po/Makevars from po/Makevars.template ..."
-  rm -f po/Makevars
-  sed '
-    /^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
-    /^COPYRIGHT_HOLDER *=/s/=.*/= '"$COPYRIGHT_HOLDER"'/
-    /^MSGID_BUGS_ADDRESS *=/s|=.*|= '"$MSGID_BUGS_ADDRESS"'|
-    /^XGETTEXT_OPTIONS *=/{
-      s/$/ \\/
-      a\
-          '"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
-    }
-  ' po/Makevars.template >po/Makevars \
-    || die 'cannot generate po/Makevars'
-
-  # If the 'gettext' module is in use, grab the latest Makefile.in.in.
-  # If only the 'gettext-h' module is in use, assume autopoint already
-  # put the correct version of this file into place.
-  case $gnulib_modules in
-    *gettext-h*) ;;
-    *gettext*)
-      cp $GNULIB_SRCDIR/build-aux/po/Makefile.in.in po/Makefile.in.in \
-        || die "cannot create po/Makefile.in.in"
-      ;;
-  esac
-
-  if test -d runtime-po; then
-    # Similarly for runtime-po/Makevars, but not quite the same.
-    rm -f runtime-po/Makevars
-    sed '
-      /^DOMAIN *=.*/s/=.*/= '"$package"'-runtime/
-      /^subdir *=.*/s/=.*/= runtime-po/
-      /^MSGID_BUGS_ADDRESS *=/s/=.*/= bug-'"$package"'@gnu.org/
-      /^XGETTEXT_OPTIONS *=/{
-        s/$/ \\/
-        a\
-            '"$XGETTEXT_OPTIONS_RUNTIME"' $${end_of_xgettext_options+}
-      }
-    ' po/Makevars.template >runtime-po/Makevars \
-    || die 'cannot generate runtime-po/Makevars'
-
-    # Copy identical files from po to runtime-po.
-    (cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po)
-  fi
-fi
-
-bootstrap_epilogue
-
-echo "$0: done.  Now you can run './configure'."
-
-# ----------------------------------------------------------------------------
-
-# Local Variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:
+autogen "$@"
diff --git a/top/bootstrap-funclib.sh b/top/bootstrap-funclib.sh
index ef0fa70ae5..efb6a086a3 100644
--- a/top/bootstrap-funclib.sh
+++ b/top/bootstrap-funclib.sh
@@ -1,6 +1,6 @@
 # A library of shell functions for autopull.sh, autogen.sh, and bootstrap.
 
-scriptversion=2022-12-27.03; # UTC
+scriptversion=2022-12-27.16; # UTC
 
 # Copyright (C) 2003-2022 Free Software Foundation, Inc.
 #
@@ -583,6 +583,455 @@ else
   use_gnulib=true
 fi
 
+
+# -------- Generate files automatically from existing sources.  --------------
+
+autogen_usage() {
+  cat <<EOF
+Usage: $me [OPTION]...
+Bootstrap this package from the checked-out sources.
+
+Optional environment variables:
+  GNULIB_SRCDIR            Specifies the local directory where gnulib
+                           sources reside.  Use this if you already
+                           have gnulib sources on your machine, and
+                           you want to use these sources.
+
+Options:
+  --copy                   copy files instead of creating symbolic links
+  --force                  attempt to bootstrap even if the sources seem
+                           not to have been checked out
+EOF
+  bootstrap_print_option_usage_hook
+  cat <<EOF
+If the file bootstrap.conf exists in the same directory as this script, its
+contents are read as shell variables to configure the bootstrap.
+
+For build prerequisites, environment variables like \$AUTOCONF and \$AMTAR
+are honored.
+
+Gnulib sources are assumed to be present:
+  * in \$GNULIB_SRCDIR, if that environment variable is set,
+  * otherwise, in the 'gnulib' submodule, if such a submodule is configured,
+  * otherwise, in the 'gnulib' subdirectory.
+
+Running without arguments will suffice in most cases.
+EOF
+}
+
+
+version_controlled_file() {
+  parent=$1
+  file=$2
+  if test -d .git; then
+    git rm -n "$file" > /dev/null 2>&1
+  elif test -d .svn; then
+    svn log -r HEAD "$file" > /dev/null 2>&1
+  elif test -d CVS; then
+    grep -F "/${file##*/}/" "$parent/CVS/Entries" 2>/dev/null |
+             grep '^/[^/]*/[0-9]' > /dev/null
+  else
+    warn_ "no version control for $file?"
+    false
+  fi
+}
+
+# Strip blank and comment lines to leave significant entries.
+gitignore_entries() {
+  sed '/^#/d; /^$/d' "$@"
+}
+
+# If $STR is not already on a line by itself in $FILE, insert it at the start.
+# Entries are inserted at the start of the ignore list to ensure existing
+# entries starting with ! are not overridden.  Such entries support
+# whitelisting exceptions after a more generic blacklist pattern.
+insert_if_absent() {
+  file=$1
+  str=$2
+  test -f $file || touch $file
+  test -r $file || die "Error: failed to read ignore file: $file"
+  duplicate_entries=$(gitignore_entries $file | sort | uniq -d)
+  if [ "$duplicate_entries" ] ; then
+    die "Error: Duplicate entries in $file: " $duplicate_entries
+  fi
+  linesold=$(gitignore_entries $file | wc -l)
+  linesnew=$( { echo "$str"; cat $file; } | gitignore_entries | sort -u | wc 
-l)
+  if [ $linesold != $linesnew ] ; then
+    { echo "$str" | cat - $file > $file.bak && mv $file.bak $file; } \
+      || die "insert_if_absent $file $str: failed"
+  fi
+}
+
+# Adjust $PATTERN for $VC_IGNORE_FILE and insert it with
+# insert_if_absent.
+insert_vc_ignore() {
+  vc_ignore_file="$1"
+  pattern="$2"
+  case $vc_ignore_file in
+  *.gitignore)
+    # A .gitignore entry that does not start with '/' applies
+    # recursively to subdirectories, so prepend '/' to every
+    # .gitignore entry.
+    pattern=$(echo "$pattern" | sed s,^,/,);;
+  esac
+  insert_if_absent "$vc_ignore_file" "$pattern"
+}
+
+symlink_to_dir()
+{
+  src=$1/$2
+  dst=${3-$2}
+
+  test -f "$src" && {
+
+    # If the destination directory doesn't exist, create it.
+    # This is required at least for "lib/uniwidth/cjk.h".
+    dst_dir=$(dirname "$dst")
+    if ! test -d "$dst_dir"; then
+      mkdir -p "$dst_dir"
+
+      # If we've just created a directory like lib/uniwidth,
+      # tell version control system(s) it's ignorable.
+      # FIXME: for now, this does only one level
+      parent=$(dirname "$dst_dir")
+      for dot_ig in x $vc_ignore; do
+        test $dot_ig = x && continue
+        ig=$parent/$dot_ig
+        insert_vc_ignore $ig "${dst_dir##*/}"
+      done
+    fi
+
+    if $copy; then
+      {
+        test ! -h "$dst" || {
+          echo "$me: rm -f $dst" &&
+          rm -f "$dst"
+        }
+      } &&
+      test -f "$dst" &&
+      cmp -s "$src" "$dst" || {
+        echo "$me: cp -fp $src $dst" &&
+        cp -fp "$src" "$dst"
+      }
+    else
+      # Leave any existing symlink alone, if it already points to the source,
+      # so that broken build tools that care about symlink times
+      # aren't confused into doing unnecessary builds.  Conversely, if the
+      # existing symlink's timestamp is older than the source, make it afresh,
+      # so that broken tools aren't confused into skipping needed builds.  See
+      # <https://lists.gnu.org/r/bug-gnulib/2011-05/msg00326.html>.
+      test -h "$dst" &&
+      src_ls=$(ls -diL "$src" 2>/dev/null) && set $src_ls && src_i=$1 &&
+      dst_ls=$(ls -diL "$dst" 2>/dev/null) && set $dst_ls && dst_i=$1 &&
+      test "$src_i" = "$dst_i" &&
+      both_ls=$(ls -dt "$src" "$dst") &&
+      test "X$both_ls" = "X$dst$nl$src" || {
+        dot_dots=
+        case $src in
+        /*) ;;
+        *)
+          case /$dst/ in
+          *//* | */../* | */./* | /*/*/*/*/*/)
+             die "invalid symlink calculation: $src -> $dst";;
+          /*/*/*/*/)    dot_dots=../../../;;
+          /*/*/*/)      dot_dots=../../;;
+          /*/*/)        dot_dots=../;;
+          esac;;
+        esac
+
+        echo "$me: ln -fs $dot_dots$src $dst" &&
+        ln -fs "$dot_dots$src" "$dst"
+      }
+    fi
+  }
+}
+
+# Regenerate all autogeneratable files that are omitted from the
+# version control repository.  In particular, regenerate all
+# aclocal.m4, config.h.in, Makefile.in, configure files with new
+# versions of autoconf or automake.
+autogen()
+{
+  # Ensure that CDPATH is not set.  Otherwise, the output from cd
+  # would cause trouble in at least one use below.
+  (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+  # Environment variables that may be set by the user.
+  : "${AUTOPOINT=autopoint}"
+  : "${AUTORECONF=autoreconf}"
+
+  if test "$vc_ignore" = auto; then
+    vc_ignore=
+    test -d .git && vc_ignore=.gitignore
+    test -d CVS && vc_ignore="$vc_ignore .cvsignore"
+  fi
+
+
+  # Parse options.
+
+  # Whether to use copies instead of symlinks.
+  copy=false
+
+  for option
+  do
+    case $option in
+    --help)
+      autogen_usage
+      return;;
+    --version)
+      set -e
+      echo "autogen.sh $scriptversion"
+      echo "$copyright"
+      return 0
+      ;;
+    --force)
+      checkout_only_file=;;
+    --copy)
+      copy=true;;
+    *)
+      bootstrap_option_hook $option || die "$option: unknown option";;
+    esac
+  done
+
+  test -z "$GNULIB_SRCDIR" || test -d "$GNULIB_SRCDIR" \
+    || die "Error: \$GNULIB_SRCDIR environment variable or --gnulib-srcdir 
option is specified, but does not denote a directory"
+
+  if test -n "$checkout_only_file" && test ! -r "$checkout_only_file"; then
+    die "Running this script from a non-checked-out distribution is risky."
+  fi
+
+  if $use_gnulib; then
+    if test -z "$GNULIB_SRCDIR"; then
+      gnulib_path=$(test -f .gitmodules && git config --file .gitmodules 
submodule.gnulib.path)
+      test -z "$gnulib_path" && gnulib_path=gnulib
+      GNULIB_SRCDIR=$gnulib_path
+    fi
+  fi
+
+  # Die if there is no AC_CONFIG_AUX_DIR($build_aux) line in configure.ac.
+  found_aux_dir=no
+  grep '^[      ]*AC_CONFIG_AUX_DIR(\['"$build_aux"'])' configure.ac \
+      >/dev/null && found_aux_dir=yes
+  grep '^[      ]*AC_CONFIG_AUX_DIR('"$build_aux"')' configure.ac \
+      >/dev/null && found_aux_dir=yes
+  test $found_aux_dir = yes \
+    || die "configure.ac lacks 'AC_CONFIG_AUX_DIR([$build_aux])'; add it"
+
+  # If $build_aux doesn't exist, create it now, otherwise some bits
+  # below will malfunction.  If creating it, also mark it as ignored.
+  if test ! -d $build_aux; then
+    mkdir $build_aux
+    for dot_ig in x $vc_ignore; do
+      test $dot_ig = x && continue
+      insert_vc_ignore $dot_ig $build_aux
+    done
+  fi
+
+  check_build_prerequisites false
+
+  use_libtool=0
+  # We'd like to use grep -E, to see if any of LT_INIT,
+  # AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac,
+  # but that's not portable enough (e.g., for Solaris).
+  grep '^[      ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \
+    && use_libtool=1
+  grep '^[      ]*LT_INIT' configure.ac >/dev/null \
+    && use_libtool=1
+  if test $use_libtool = 1; then
+    find_tool LIBTOOLIZE glibtoolize libtoolize
+  fi
+
+  if $use_gnulib; then
+    gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
+    <$gnulib_tool || return
+  fi
+
+  # NOTE: we have to be careful to run both autopoint and libtoolize
+  # before gnulib-tool, since gnulib-tool is likely to provide newer
+  # versions of files "installed" by these two programs.
+  # Then, *after* gnulib-tool (see below), we have to be careful to
+  # run autoreconf in such a way that it does not run either of these
+  # two just-pre-run programs.
+
+  # Import from gettext.
+  with_gettext=yes
+  grep '^[      ]*AM_GNU_GETTEXT_VERSION(' configure.ac >/dev/null || \
+      with_gettext=no
+
+  if test $with_gettext = yes || test $use_libtool = 1; then
+
+    tempbase=.bootstrap$$
+    trap "rm -f $tempbase.0 $tempbase.1" HUP INT PIPE TERM
+
+    > $tempbase.0 > $tempbase.1 &&
+    find . ! -type d -print | sort > $tempbase.0 || return
+
+    if test $with_gettext = yes; then
+      # Released autopoint has the tendency to install macros that have been
+      # obsoleted in current gnulib, so run this before gnulib-tool.
+      echo "$0: $AUTOPOINT --force"
+      $AUTOPOINT --force || return
+    fi
+
+    # Autoreconf runs aclocal before libtoolize, which causes spurious
+    # warnings if the initial aclocal is confused by the libtoolized
+    # (or worse out-of-date) macro directory.
+    # libtoolize 1.9b added the --install option; but we support back
+    # to libtoolize 1.5.22, where the install action was default.
+    if test $use_libtool = 1; then
+      install=
+      case $($LIBTOOLIZE --help) in
+        *--install*) install=--install ;;
+      esac
+      echo "running: $LIBTOOLIZE $install --copy"
+      $LIBTOOLIZE $install --copy
+    fi
+
+    find . ! -type d -print | sort >$tempbase.1
+    old_IFS=$IFS
+    IFS=$nl
+    for file in $(comm -13 $tempbase.0 $tempbase.1); do
+      IFS=$old_IFS
+      parent=${file%/*}
+      version_controlled_file "$parent" "$file" || {
+        for dot_ig in x $vc_ignore; do
+          test $dot_ig = x && continue
+          ig=$parent/$dot_ig
+          insert_vc_ignore "$ig" "${file##*/}"
+        done
+      }
+    done
+    IFS=$old_IFS
+
+    rm -f $tempbase.0 $tempbase.1
+    trap - HUP INT PIPE TERM
+  fi
+
+  # Import from gnulib.
+
+  if $use_gnulib; then
+    gnulib_tool_options="\
+     --no-changelog\
+     --aux-dir=$build_aux\
+     --doc-base=$doc_base\
+     --lib=$gnulib_name\
+     --m4-base=$m4_base/\
+     --source-base=$source_base/\
+     --tests-base=$tests_base\
+     --local-dir=$local_gl_dir\
+     $gnulib_tool_option_extras\
+    "
+    if test $use_libtool = 1; then
+      case "$gnulib_tool_options " in
+        *' --libtool '*) ;;
+        *) gnulib_tool_options="$gnulib_tool_options --libtool" ;;
+      esac
+    fi
+    echo "$0: $gnulib_tool $gnulib_tool_options --import ..."
+    $gnulib_tool $gnulib_tool_options --import $gnulib_modules \
+      || die "gnulib-tool failed"
+
+    for file in $gnulib_files; do
+      symlink_to_dir "$GNULIB_SRCDIR" $file \
+        || die "failed to symlink $file"
+    done
+  fi
+
+  bootstrap_post_import_hook \
+    || die "bootstrap_post_import_hook failed"
+
+  # Remove any dangling symlink matching "*.m4" or "*.[ch]" in some
+  # gnulib-populated directories.  Such .m4 files would cause aclocal to fail.
+  # The following requires GNU find 4.2.3 or newer.  Considering the usual
+  # portability constraints of this script, that may seem a very demanding
+  # requirement, but it should be ok.  Ignore any failure, which is fine,
+  # since this is only a convenience to help developers avoid the relatively
+  # unusual case in which a symlinked-to .m4 file is git-removed from gnulib
+  # between successive runs of this script.
+  find "$m4_base" "$source_base" \
+    -depth \( -name '*.m4' -o -name '*.[ch]' \) \
+    -type l -xtype l -delete > /dev/null 2>&1
+
+  # Invoke autoreconf with --force --install to ensure upgrades of tools
+  # such as ylwrap.
+  AUTORECONFFLAGS="--verbose --install --force -I $m4_base $ACLOCAL_FLAGS"
+
+  # Some systems (RHEL 5) are using ancient autotools, for which the
+  # --no-recursive option had not been invented.  Detect that lack and
+  # omit the option when it's not supported.  FIXME in 2017: remove this
+  # hack when RHEL 5 autotools are updated, or when they become irrelevant.
+  case $($AUTORECONF --help) in
+    *--no-recursive*) AUTORECONFFLAGS="$AUTORECONFFLAGS --no-recursive";;
+  esac
+
+  # Tell autoreconf not to invoke autopoint or libtoolize; they were run above.
+  echo "running: AUTOPOINT=true LIBTOOLIZE=true $AUTORECONF $AUTORECONFFLAGS"
+  AUTOPOINT=true LIBTOOLIZE=true $AUTORECONF $AUTORECONFFLAGS \
+    || die "autoreconf failed"
+
+  # Get some extra files from gnulib, overriding existing files.
+  for file in $gnulib_extra_files; do
+    case $file in
+      */INSTALL) dst=INSTALL;;
+      build-aux/*) dst=$build_aux/${file#build-aux/};;
+      *) dst=$file;;
+    esac
+    symlink_to_dir "$GNULIB_SRCDIR" $file $dst \
+      || die "failed to symlink $file"
+  done
+
+  if test $with_gettext = yes; then
+    # Create gettext configuration.
+    echo "$0: Creating po/Makevars from po/Makevars.template ..."
+    rm -f po/Makevars
+    sed '
+      /^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
+      /^COPYRIGHT_HOLDER *=/s/=.*/= '"$COPYRIGHT_HOLDER"'/
+      /^MSGID_BUGS_ADDRESS *=/s|=.*|= '"$MSGID_BUGS_ADDRESS"'|
+      /^XGETTEXT_OPTIONS *=/{
+        s/$/ \\/
+        a\
+            '"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
+      }
+    ' po/Makevars.template >po/Makevars \
+      || die 'cannot generate po/Makevars'
+
+    # If the 'gettext' module is in use, grab the latest Makefile.in.in.
+    # If only the 'gettext-h' module is in use, assume autopoint already
+    # put the correct version of this file into place.
+    case $gnulib_modules in
+      *gettext-h*) ;;
+      *gettext*)
+        cp $GNULIB_SRCDIR/build-aux/po/Makefile.in.in po/Makefile.in.in \
+          || die "cannot create po/Makefile.in.in"
+        ;;
+    esac
+
+    if test -d runtime-po; then
+      # Similarly for runtime-po/Makevars, but not quite the same.
+      rm -f runtime-po/Makevars
+      sed '
+        /^DOMAIN *=.*/s/=.*/= '"$package"'-runtime/
+        /^subdir *=.*/s/=.*/= runtime-po/
+        /^MSGID_BUGS_ADDRESS *=/s/=.*/= bug-'"$package"'@gnu.org/
+        /^XGETTEXT_OPTIONS *=/{
+          s/$/ \\/
+          a\
+              '"$XGETTEXT_OPTIONS_RUNTIME"' $${end_of_xgettext_options+}
+        }
+      ' po/Makevars.template >runtime-po/Makevars \
+      || die 'cannot generate runtime-po/Makevars'
+
+      # Copy identical files from po to runtime-po.
+      (cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po)
+    fi
+  fi
+
+  bootstrap_epilogue
+
+  echo "$0: done.  Now you can run './configure'."
+}
+
 # ----------------------------------------------------------------------------
 
 # Local Variables:
-- 
2.25.1





reply via email to

[Prev in Thread] Current Thread [Next in Thread]