[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Chainload to Windows on IDE from SCSI?
From: |
Jago Pearce |
Subject: |
Chainload to Windows on IDE from SCSI? |
Date: |
Tue, 2 May 2006 14:28:15 -0700 |
First of all I'm not new to grub. However, I'm having trouble with
this setup. I have my Windows partition on my IDE drive and my linux
partition on my SCSI drive.
I want to use grub to select between the 2 O/S's. Fairly
straightforward but at the moment I can only do it by going into the
BIOs and selecting boot from SCSI or boot from IDE.
For testing I use the grub commandline; `setup (hd0,0)` and `boot`. I
have worked though every single hd combination; hd0-5,0-5 and tried to
specify it to chainload to that drive.
All I need is to see a working menu.lst for chainload to IDE from SCSI
and I'll be fine.
Here's my fdisk -l with operating systems highlighted. hda1 is
Windows, sda1 is linux.
--->
address@hidden:~ # fdisk -l
Disk /dev/hda: 20.4 GB, 20490559488 bytes
255 heads, 63 sectors/track, 2491 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 1147 9213246 7 HPFS/NTFS
/dev/hda2 1148 2490 10787647+ f W95 Ext'd (LBA)
/dev/hda5 1148 2490 10787616 7 HPFS/NTFS
Disk /dev/hdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 37 297171 82 Linux swap / Solaris
/dev/hdb2 * 38 9729 77850990 83 Linux
Disk /dev/sda: 18.3 GB, 18351959040 bytes
255 heads, 63 sectors/track, 2231 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 2136 17157388+ 83 Linux
/dev/sda2 2137 2231 763087+ f W95 Ext'd (LBA)
/dev/sda5 2137 2231 763056 82 Linux swap / Solaris
Disk /dev/sdb: 65 MB, 65011712 bytes
256 heads, 63 sectors/track, 7 cylinders
Units = cylinders of 16128 * 512 = 8257536 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 7 56416+ b W95 FAT32
address@hidden:~ #
- Chainload to Windows on IDE from SCSI?,
Jago Pearce <=