[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
bug#38735: 1.1.0rc2 available for testing!
From: |
Ludovic Courtès |
Subject: |
bug#38735: 1.1.0rc2 available for testing! |
Date: |
Mon, 13 Apr 2020 15:45:58 +0200 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/26.3 (gnu/linux) |
Hello,
"Robert Smith" <address@hidden> skribis:
>> https://web.fdn.fr/~lcourtes/software/guix/1.1.0rc2
>
> I ran into the same issue that Jesse encountered in December, the
> installer hangs when it tries to connect to wifi, and I can't escape by
> pressing Alt-F2/F3/F12.
When you’re on tty1 (the installer), you have to hit Ctrl-Alt-F12
etc. (note “Ctrl”). Is it what you tried?
> In the end I just have to hold down the power button. I've tested this
> with different wifi networks and it's always the same. I tried using
> the console to connect to wifi, and everything worked smoothly. The
> only difference from the manual was that I had to use `rfkill unblock
> wifi` before I could bring the interface up. I didn't have this issue
> when I first installed guix, so I downloaded the 1.0.1 installer and
> as I thought the issue wasn't there, and the wifi connection went
> smoothly.
OK. It could have something to do with the issue about Connman not
starting that Florian reported.
What does /var/log/messages show? (In particular, messages from
shepherd, connmand, and dbus.)
> I'm not sure how I can get any diagnostic information from my system, if
> you have ideas I'd be happy to try them out. I tested this on my Librem
> 15 v4; I remember from Guix Days that a few other people have Librem
> laptops, I'm curious if they can use the installer to connect to a wifi
> network.
Anyone else with a Librem laptop can give it a try? You don’t need to
run the full installation, it’s enough to go past the network setup
phase, which is early on.
Thanks for your report,
Ludo’.