bug#44101: Unable to use /dev/disk/by-id/ symlinks with u-boot and guix system reconfigure

[Vagrant Cascadian]

On 2020-10-22, Mathieu Othacehe wrote:
> Hey Vagrant,
>
>> I'm writing this from memory now, but I can also boot the machines at a
>> later point and get the exact configurations, if needed.
>
> Sorry for breaking your use-case. Recently I have split up the
> bootloader installation in two distinct parts:

Thanks for your work on it, even if it resulted in a regression. :)


> - Installing a bootloader directly on a mounted directory.
> - Installing a bootloader on a raw-image or device.
>
> Depending on the bootloader type, one or both of the methods are
> supported. u-boot does not really support the first method, so the
> patch you are mentioning is disabling this method.
>
> The problem is while reconfiguring, the first method only is used. The
> attached patch tries to fallback to the second method if the first one
> is not defined.

I don't quite understand why that would be the issue here; guix system
reconfigure works fine when /dev/mmcblkN is specified target in the
system config.scm, just not when the target is /dev/disk/by-id/...

My wild guess was something was checking for a literal block device, and
failing with a symlink pointing to a block device.


Trying your patch gets me a backtrace, unfortunately...

With the bootloader section...

(bootloader (bootloader-configuration
               (target "/dev/disk/by-id/mmc-SDU64_0xbaf3002e")
               (bootloader u-boot-pinebook-bootloader)
               ))

And your patch applied on top of 3e09453884efa82ef97b8ec6e34470c67a1206a7...

$ sudo -E ./pre-inst-env guix system reconfigure --keep-going 
~/pinebook-1080p-desktop.scm
...
waiting for locks or build slots...
building /gnu/store/n17lkvs6vhq0x16mk0rxnv4j5ifvrlyr-switch-to-system.scm.drv...
making '/gnu/store/vc3bzajlv0yxrdjmqph4sikzqkywvfq1-system' the current 
system...
setting up setuid programs in '/run/setuid-programs'...
populating /etc from /gnu/store/gssnxbhwa9dygn1i6i46j81ww5gczzav-etc...
The following derivation will be built:
   /gnu/store/s19y61jrdys760zccxm2qiiqjpcv1fcx-install-bootloader.scm.drv

building 
/gnu/store/s19y61jrdys760zccxm2qiiqjpcv1fcx-install-bootloader.scm.drv...
Backtrace:
In guix/scripts/system.scm:
   1339:8 19 (_)
In guix/status.scm:
    776:4 18 (call-with-status-report _ _)
In guix/scripts/system.scm:
   1172:4 17 (_)
In ice-9/boot-9.scm:
  1736:10 16 (with-exception-handler _ _ #:unwind? _ # _)
In guix/store.scm:
   631:37 15 (thunk)
   1300:8 14 (call-with-build-handler _ _)
   1300:8 13 (call-with-build-handler _ _)
   1300:8 12 (call-with-build-handler _ _)
   1300:8 11 (call-with-build-handler _ _)
   1300:8 10 (call-with-build-handler _ _)
   1300:8  9 (call-with-build-handler #<procedure ffff658a29f0 at g…> …)
  2042:24  8 (run-with-store #<store-connection 256.99 ffff67755d70> …)
In guix/scripts/system.scm:
   842:13  7 (_ _)
   844:15  6 (_ _)
   750:13  5 (_ _)
In ice-9/boot-9.scm:
    152:2  4 (with-fluid* _ _ _)
In unknown file:
           3 (primitive-load "/gnu/store/81w2h9zd6b5q0ddchc0wr6vph22…")
In ice-9/eval.scm:
    619:8  2 (_ #(#(#<directory (guile-user) ffff7c2c4f00> "//v…") #))
In ice-9/boot-9.scm:
  1669:16  1 (raise-exception _ #:continuable? _)
  1669:16  0 (raise-exception _ #:continuable? _)

ice-9/boot-9.scm:1669:16: In procedure raise-exception:
ERROR:
  1. &i/o-filename: "/dev/disk/by-id/mmc-SDU64_0xbaf3002e"


It also fails when target is /dev/mmcblk1.

So, clearly this is some other issue...


live well,
  vagrant

signature.asc
Description: PGP signature