[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: oskit-mach: net access causes crash

From: Roland McGrath
Subject: Re: oskit-mach: net access causes crash
Date: Thu, 16 Aug 2001 20:07:17 -0400 (EDT)

Use "set remotedebug 1" in gdb before you start.  It should then show you
everything it sends and receives on the serial line.  You can see if there
is something else coming out on the serial line confusing gdb.  Are you
using one serial port or two?  I always recommend using one serial port for
the serial console and the other port for gdb.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]