acinclude.m4-234-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
acinclude.m4-235-  ;;
acinclude.m4-236-esac
acinclude.m4-237-
acinclude.m4-238-# If we're using GNU nm, then use its standard symbol codes.
acinclude.m4:239:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
acinclude.m4-240-  symcode='[[ABCDGISTW]]'
acinclude.m4-241-fi
acinclude.m4-242-
acinclude.m4-243-# Try without a prefix undercore, then with it.
acinclude.m4-244-for ac_symprfx in "" "_"; do
--
acinclude.m4-1372-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
acinclude.m4-1373-    fi
acinclude.m4-1374-    ;;
acinclude.m4-1375-
acinclude.m4-1376-  solaris* | sysv5*)
acinclude.m4:1377:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
acinclude.m4-1378-      ld_shlibs=no
acinclude.m4-1379-      cat <<EOF 1>&2
acinclude.m4-1380-
acinclude.m4-1381-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
acinclude.m4-1382-*** create shared libraries on Solaris systems.  Therefore, libtool
--
acinclude.m4-3226-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
acinclude.m4-3227-      lt_cv_path_LD="$ac_dir/$ac_prog"
acinclude.m4-3228-      # Check to see if the program is GNU ld.  I'd rather use --version,
acinclude.m4-3229-      # but apparently some GNU ld's only accept -v.
acinclude.m4-3230-      # Break only if it was the GNU/non-GNU ld that we prefer.
acinclude.m4:3231:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
acinclude.m4-3232-	test "$with_gnu_ld" != no && break
acinclude.m4-3233-      else
acinclude.m4-3234-	test "$with_gnu_ld" != yes && break
acinclude.m4-3235-      fi
acinclude.m4-3236-    fi
--
acinclude.m4-3251-
acinclude.m4-3252-# AC_PROG_LD_GNU -
acinclude.m4-3253-AC_DEFUN([AC_PROG_LD_GNU],
acinclude.m4-3254-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
acinclude.m4-3255-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
acinclude.m4:3256:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
acinclude.m4-3257-  lt_cv_prog_gnu_ld=yes
acinclude.m4-3258-else
acinclude.m4-3259-  lt_cv_prog_gnu_ld=no
acinclude.m4-3260-fi])
acinclude.m4-3261-with_gnu_ld=$lt_cv_prog_gnu_ld
--
aclocal.m4-224-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
aclocal.m4-225-  ;;
aclocal.m4-226-esac
aclocal.m4-227-
aclocal.m4-228-# If we're using GNU nm, then use its standard symbol codes.
aclocal.m4:229:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
aclocal.m4-230-  symcode='[[ABCDGISTW]]'
aclocal.m4-231-fi
aclocal.m4-232-
aclocal.m4-233-# Try without a prefix undercore, then with it.
aclocal.m4-234-for ac_symprfx in "" "_"; do
--
aclocal.m4-1336-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
aclocal.m4-1337-    fi
aclocal.m4-1338-    ;;
aclocal.m4-1339-
aclocal.m4-1340-  solaris* | sysv5*)
aclocal.m4:1341:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
aclocal.m4-1342-      ld_shlibs=no
aclocal.m4-1343-      cat <<EOF 1>&2
aclocal.m4-1344-
aclocal.m4-1345-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
aclocal.m4-1346-*** create shared libraries on Solaris systems.  Therefore, libtool
--
aclocal.m4-3156-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
aclocal.m4-3157-      lt_cv_path_LD="$ac_dir/$ac_prog"
aclocal.m4-3158-      # Check to see if the program is GNU ld.  I'd rather use --version,
aclocal.m4-3159-      # but apparently some GNU ld's only accept -v.
aclocal.m4-3160-      # Break only if it was the GNU/non-GNU ld that we prefer.
aclocal.m4:3161:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
aclocal.m4-3162-	test "$with_gnu_ld" != no && break
aclocal.m4-3163-      else
aclocal.m4-3164-	test "$with_gnu_ld" != yes && break
aclocal.m4-3165-      fi
aclocal.m4-3166-    fi
--
aclocal.m4-3181-
aclocal.m4-3182-# AC_PROG_LD_GNU -
aclocal.m4-3183-AC_DEFUN([AC_PROG_LD_GNU],
aclocal.m4-3184-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
aclocal.m4-3185-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
aclocal.m4:3186:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
aclocal.m4-3187-  lt_cv_prog_gnu_ld=yes
aclocal.m4-3188-else
aclocal.m4-3189-  lt_cv_prog_gnu_ld=no
aclocal.m4-3190-fi])
aclocal.m4-3191-with_gnu_ld=$lt_cv_prog_gnu_ld
--
cdemo/acinclude.m4-234-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
cdemo/acinclude.m4-235-  ;;
cdemo/acinclude.m4-236-esac
cdemo/acinclude.m4-237-
cdemo/acinclude.m4-238-# If we're using GNU nm, then use its standard symbol codes.
cdemo/acinclude.m4:239:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
cdemo/acinclude.m4-240-  symcode='[[ABCDGISTW]]'
cdemo/acinclude.m4-241-fi
cdemo/acinclude.m4-242-
cdemo/acinclude.m4-243-# Try without a prefix undercore, then with it.
cdemo/acinclude.m4-244-for ac_symprfx in "" "_"; do
--
cdemo/acinclude.m4-1372-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
cdemo/acinclude.m4-1373-    fi
cdemo/acinclude.m4-1374-    ;;
cdemo/acinclude.m4-1375-
cdemo/acinclude.m4-1376-  solaris* | sysv5*)
cdemo/acinclude.m4:1377:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
cdemo/acinclude.m4-1378-      ld_shlibs=no
cdemo/acinclude.m4-1379-      cat <<EOF 1>&2
cdemo/acinclude.m4-1380-
cdemo/acinclude.m4-1381-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
cdemo/acinclude.m4-1382-*** create shared libraries on Solaris systems.  Therefore, libtool
--
cdemo/acinclude.m4-3226-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
cdemo/acinclude.m4-3227-      lt_cv_path_LD="$ac_dir/$ac_prog"
cdemo/acinclude.m4-3228-      # Check to see if the program is GNU ld.  I'd rather use --version,
cdemo/acinclude.m4-3229-      # but apparently some GNU ld's only accept -v.
cdemo/acinclude.m4-3230-      # Break only if it was the GNU/non-GNU ld that we prefer.
cdemo/acinclude.m4:3231:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
cdemo/acinclude.m4-3232-	test "$with_gnu_ld" != no && break
cdemo/acinclude.m4-3233-      else
cdemo/acinclude.m4-3234-	test "$with_gnu_ld" != yes && break
cdemo/acinclude.m4-3235-      fi
cdemo/acinclude.m4-3236-    fi
--
cdemo/acinclude.m4-3251-
cdemo/acinclude.m4-3252-# AC_PROG_LD_GNU -
cdemo/acinclude.m4-3253-AC_DEFUN([AC_PROG_LD_GNU],
cdemo/acinclude.m4-3254-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
cdemo/acinclude.m4-3255-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
cdemo/acinclude.m4:3256:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
cdemo/acinclude.m4-3257-  lt_cv_prog_gnu_ld=yes
cdemo/acinclude.m4-3258-else
cdemo/acinclude.m4-3259-  lt_cv_prog_gnu_ld=no
cdemo/acinclude.m4-3260-fi])
cdemo/acinclude.m4-3261-with_gnu_ld=$lt_cv_prog_gnu_ld
--
cdemo/aclocal.m4-224-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
cdemo/aclocal.m4-225-  ;;
cdemo/aclocal.m4-226-esac
cdemo/aclocal.m4-227-
cdemo/aclocal.m4-228-# If we're using GNU nm, then use its standard symbol codes.
cdemo/aclocal.m4:229:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
cdemo/aclocal.m4-230-  symcode='[[ABCDGISTW]]'
cdemo/aclocal.m4-231-fi
cdemo/aclocal.m4-232-
cdemo/aclocal.m4-233-# Try without a prefix undercore, then with it.
cdemo/aclocal.m4-234-for ac_symprfx in "" "_"; do
--
cdemo/aclocal.m4-1336-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
cdemo/aclocal.m4-1337-    fi
cdemo/aclocal.m4-1338-    ;;
cdemo/aclocal.m4-1339-
cdemo/aclocal.m4-1340-  solaris* | sysv5*)
cdemo/aclocal.m4:1341:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
cdemo/aclocal.m4-1342-      ld_shlibs=no
cdemo/aclocal.m4-1343-      cat <<EOF 1>&2
cdemo/aclocal.m4-1344-
cdemo/aclocal.m4-1345-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
cdemo/aclocal.m4-1346-*** create shared libraries on Solaris systems.  Therefore, libtool
--
cdemo/aclocal.m4-3156-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
cdemo/aclocal.m4-3157-      lt_cv_path_LD="$ac_dir/$ac_prog"
cdemo/aclocal.m4-3158-      # Check to see if the program is GNU ld.  I'd rather use --version,
cdemo/aclocal.m4-3159-      # but apparently some GNU ld's only accept -v.
cdemo/aclocal.m4-3160-      # Break only if it was the GNU/non-GNU ld that we prefer.
cdemo/aclocal.m4:3161:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
cdemo/aclocal.m4-3162-	test "$with_gnu_ld" != no && break
cdemo/aclocal.m4-3163-      else
cdemo/aclocal.m4-3164-	test "$with_gnu_ld" != yes && break
cdemo/aclocal.m4-3165-      fi
cdemo/aclocal.m4-3166-    fi
--
cdemo/aclocal.m4-3181-
cdemo/aclocal.m4-3182-# AC_PROG_LD_GNU -
cdemo/aclocal.m4-3183-AC_DEFUN([AC_PROG_LD_GNU],
cdemo/aclocal.m4-3184-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
cdemo/aclocal.m4-3185-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
cdemo/aclocal.m4:3186:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
cdemo/aclocal.m4-3187-  lt_cv_prog_gnu_ld=yes
cdemo/aclocal.m4-3188-else
cdemo/aclocal.m4-3189-  lt_cv_prog_gnu_ld=no
cdemo/aclocal.m4-3190-fi])
cdemo/aclocal.m4-3191-with_gnu_ld=$lt_cv_prog_gnu_ld
--
cdemo/configure-1688-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
cdemo/configure-1689-      lt_cv_path_LD="$ac_dir/$ac_prog"
cdemo/configure-1690-      # Check to see if the program is GNU ld.  I'd rather use --version,
cdemo/configure-1691-      # but apparently some GNU ld's only accept -v.
cdemo/configure-1692-      # Break only if it was the GNU/non-GNU ld that we prefer.
cdemo/configure:1693:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
cdemo/configure-1694-	test "$with_gnu_ld" != no && break
cdemo/configure-1695-      else
cdemo/configure-1696-	test "$with_gnu_ld" != yes && break
cdemo/configure-1697-      fi
cdemo/configure-1698-    fi
--
cdemo/configure-1714-echo "configure:1715: checking if the linker ($LD) is GNU ld" >&5
cdemo/configure-1715-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
cdemo/configure-1716-  echo $ac_n "(cached) $ac_c" 1>&6
cdemo/configure-1717-else
cdemo/configure-1718-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
cdemo/configure:1719:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
cdemo/configure-1720-  lt_cv_prog_gnu_ld=yes
cdemo/configure-1721-else
cdemo/configure-1722-  lt_cv_prog_gnu_ld=no
cdemo/configure-1723-fi
cdemo/configure-1724-fi
--
cdemo/configure-2069-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
cdemo/configure-2070-  ;;
cdemo/configure-2071-esac
cdemo/configure-2072-
cdemo/configure-2073-# If we're using GNU nm, then use its standard symbol codes.
cdemo/configure:2074:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
cdemo/configure-2075-  symcode='[ABCDGISTW]'
cdemo/configure-2076-fi
cdemo/configure-2077-
cdemo/configure-2078-# Try without a prefix undercore, then with it.
cdemo/configure-2079-for ac_symprfx in "" "_"; do
--
cdemo/configure-3317-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
cdemo/configure-3318-    fi
cdemo/configure-3319-    ;;
cdemo/configure-3320-
cdemo/configure-3321-  solaris* | sysv5*)
cdemo/configure:3322:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
cdemo/configure-3323-      ld_shlibs=no
cdemo/configure-3324-      cat <<EOF 1>&2
cdemo/configure-3325-
cdemo/configure-3326-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
cdemo/configure-3327-*** create shared libraries on Solaris systems.  Therefore, libtool
--
config.guess-823-	exit 0 ;;
config.guess-824-    x86_64:Linux:*:*)
config.guess-825-	echo x86_64-unknown-linux-gnu
config.guess-826-	exit 0 ;;
config.guess-827-    i*86:Linux:*:*)
config.guess:828:	# The BFD linker knows what the default object file format is, so
config.guess-829-	# first see if it will tell us. cd to the root directory to prevent
config.guess-830-	# problems with other programs or directories called `ld' in the path.
config.guess-831-	ld_supported_targets=`cd /; ld --help 2>&1 \
config.guess-832-			 | sed -ne '/supported targets:/!d
config.guess-833-				    s/[ 	][ 	]*/ /g
--
config.guess-843-		exit 0 ;;		
config.guess-844-	  coff-i386)
config.guess-845-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
config.guess-846-		exit 0 ;;
config.guess-847-	  "")
config.guess:848:		# Either a pre-BFD a.out linker (linux-gnuoldld) or
config.guess-849-		# one that does not give us useful --help.
config.guess-850-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
config.guess-851-		exit 0 ;;
config.guess-852-	esac
config.guess-853-	# Determine whether the default compiler is a.out or elf
--
config.guess-1130-#endif
config.guess-1131-main ()
config.guess-1132-{
config.guess-1133-#if defined (sony)
config.guess-1134-#if defined (MIPSEB)
config.guess:1135:  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
config.guess-1136-     I don't know....  */
config.guess-1137-  printf ("mips-sony-bsd\n"); exit (0);
config.guess-1138-#else
config.guess-1139-#include <sys/param.h>
config.guess-1140-  printf ("m68k-sony-newsos%s\n",
--
configure-1473-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
configure-1474-      lt_cv_path_LD="$ac_dir/$ac_prog"
configure-1475-      # Check to see if the program is GNU ld.  I'd rather use --version,
configure-1476-      # but apparently some GNU ld's only accept -v.
configure-1477-      # Break only if it was the GNU/non-GNU ld that we prefer.
configure:1478:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
configure-1479-	test "$with_gnu_ld" != no && break
configure-1480-      else
configure-1481-	test "$with_gnu_ld" != yes && break
configure-1482-      fi
configure-1483-    fi
--
configure-1499-echo "configure:1500: checking if the linker ($LD) is GNU ld" >&5
configure-1500-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
configure-1501-  echo $ac_n "(cached) $ac_c" 1>&6
configure-1502-else
configure-1503-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
configure:1504:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
configure-1505-  lt_cv_prog_gnu_ld=yes
configure-1506-else
configure-1507-  lt_cv_prog_gnu_ld=no
configure-1508-fi
configure-1509-fi
--
configure-2106-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
configure-2107-  ;;
configure-2108-esac
configure-2109-
configure-2110-# If we're using GNU nm, then use its standard symbol codes.
configure:2111:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
configure-2112-  symcode='[ABCDGISTW]'
configure-2113-fi
configure-2114-
configure-2115-# Try without a prefix undercore, then with it.
configure-2116-for ac_symprfx in "" "_"; do
--
configure-3626-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
configure-3627-    fi
configure-3628-    ;;
configure-3629-
configure-3630-  solaris* | sysv5*)
configure:3631:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
configure-3632-      ld_shlibs=no
configure-3633-      cat <<EOF 1>&2
configure-3634-
configure-3635-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
configure-3636-*** create shared libraries on Solaris systems.  Therefore, libtool
--
demo/acinclude.m4-234-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
demo/acinclude.m4-235-  ;;
demo/acinclude.m4-236-esac
demo/acinclude.m4-237-
demo/acinclude.m4-238-# If we're using GNU nm, then use its standard symbol codes.
demo/acinclude.m4:239:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
demo/acinclude.m4-240-  symcode='[[ABCDGISTW]]'
demo/acinclude.m4-241-fi
demo/acinclude.m4-242-
demo/acinclude.m4-243-# Try without a prefix undercore, then with it.
demo/acinclude.m4-244-for ac_symprfx in "" "_"; do
--
demo/acinclude.m4-1372-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
demo/acinclude.m4-1373-    fi
demo/acinclude.m4-1374-    ;;
demo/acinclude.m4-1375-
demo/acinclude.m4-1376-  solaris* | sysv5*)
demo/acinclude.m4:1377:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
demo/acinclude.m4-1378-      ld_shlibs=no
demo/acinclude.m4-1379-      cat <<EOF 1>&2
demo/acinclude.m4-1380-
demo/acinclude.m4-1381-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
demo/acinclude.m4-1382-*** create shared libraries on Solaris systems.  Therefore, libtool
--
demo/acinclude.m4-3226-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
demo/acinclude.m4-3227-      lt_cv_path_LD="$ac_dir/$ac_prog"
demo/acinclude.m4-3228-      # Check to see if the program is GNU ld.  I'd rather use --version,
demo/acinclude.m4-3229-      # but apparently some GNU ld's only accept -v.
demo/acinclude.m4-3230-      # Break only if it was the GNU/non-GNU ld that we prefer.
demo/acinclude.m4:3231:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
demo/acinclude.m4-3232-	test "$with_gnu_ld" != no && break
demo/acinclude.m4-3233-      else
demo/acinclude.m4-3234-	test "$with_gnu_ld" != yes && break
demo/acinclude.m4-3235-      fi
demo/acinclude.m4-3236-    fi
--
demo/acinclude.m4-3251-
demo/acinclude.m4-3252-# AC_PROG_LD_GNU -
demo/acinclude.m4-3253-AC_DEFUN([AC_PROG_LD_GNU],
demo/acinclude.m4-3254-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
demo/acinclude.m4-3255-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
demo/acinclude.m4:3256:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
demo/acinclude.m4-3257-  lt_cv_prog_gnu_ld=yes
demo/acinclude.m4-3258-else
demo/acinclude.m4-3259-  lt_cv_prog_gnu_ld=no
demo/acinclude.m4-3260-fi])
demo/acinclude.m4-3261-with_gnu_ld=$lt_cv_prog_gnu_ld
--
demo/aclocal.m4-224-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
demo/aclocal.m4-225-  ;;
demo/aclocal.m4-226-esac
demo/aclocal.m4-227-
demo/aclocal.m4-228-# If we're using GNU nm, then use its standard symbol codes.
demo/aclocal.m4:229:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
demo/aclocal.m4-230-  symcode='[[ABCDGISTW]]'
demo/aclocal.m4-231-fi
demo/aclocal.m4-232-
demo/aclocal.m4-233-# Try without a prefix undercore, then with it.
demo/aclocal.m4-234-for ac_symprfx in "" "_"; do
--
demo/aclocal.m4-1336-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
demo/aclocal.m4-1337-    fi
demo/aclocal.m4-1338-    ;;
demo/aclocal.m4-1339-
demo/aclocal.m4-1340-  solaris* | sysv5*)
demo/aclocal.m4:1341:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
demo/aclocal.m4-1342-      ld_shlibs=no
demo/aclocal.m4-1343-      cat <<EOF 1>&2
demo/aclocal.m4-1344-
demo/aclocal.m4-1345-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
demo/aclocal.m4-1346-*** create shared libraries on Solaris systems.  Therefore, libtool
--
demo/aclocal.m4-3156-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
demo/aclocal.m4-3157-      lt_cv_path_LD="$ac_dir/$ac_prog"
demo/aclocal.m4-3158-      # Check to see if the program is GNU ld.  I'd rather use --version,
demo/aclocal.m4-3159-      # but apparently some GNU ld's only accept -v.
demo/aclocal.m4-3160-      # Break only if it was the GNU/non-GNU ld that we prefer.
demo/aclocal.m4:3161:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
demo/aclocal.m4-3162-	test "$with_gnu_ld" != no && break
demo/aclocal.m4-3163-      else
demo/aclocal.m4-3164-	test "$with_gnu_ld" != yes && break
demo/aclocal.m4-3165-      fi
demo/aclocal.m4-3166-    fi
--
demo/aclocal.m4-3181-
demo/aclocal.m4-3182-# AC_PROG_LD_GNU -
demo/aclocal.m4-3183-AC_DEFUN([AC_PROG_LD_GNU],
demo/aclocal.m4-3184-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
demo/aclocal.m4-3185-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
demo/aclocal.m4:3186:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
demo/aclocal.m4-3187-  lt_cv_prog_gnu_ld=yes
demo/aclocal.m4-3188-else
demo/aclocal.m4-3189-  lt_cv_prog_gnu_ld=no
demo/aclocal.m4-3190-fi])
demo/aclocal.m4-3191-with_gnu_ld=$lt_cv_prog_gnu_ld
--
demo/configure-1764-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
demo/configure-1765-      lt_cv_path_LD="$ac_dir/$ac_prog"
demo/configure-1766-      # Check to see if the program is GNU ld.  I'd rather use --version,
demo/configure-1767-      # but apparently some GNU ld's only accept -v.
demo/configure-1768-      # Break only if it was the GNU/non-GNU ld that we prefer.
demo/configure:1769:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
demo/configure-1770-	test "$with_gnu_ld" != no && break
demo/configure-1771-      else
demo/configure-1772-	test "$with_gnu_ld" != yes && break
demo/configure-1773-      fi
demo/configure-1774-    fi
--
demo/configure-1790-echo "configure:1791: checking if the linker ($LD) is GNU ld" >&5
demo/configure-1791-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
demo/configure-1792-  echo $ac_n "(cached) $ac_c" 1>&6
demo/configure-1793-else
demo/configure-1794-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
demo/configure:1795:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
demo/configure-1796-  lt_cv_prog_gnu_ld=yes
demo/configure-1797-else
demo/configure-1798-  lt_cv_prog_gnu_ld=no
demo/configure-1799-fi
demo/configure-1800-fi
--
demo/configure-2145-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
demo/configure-2146-  ;;
demo/configure-2147-esac
demo/configure-2148-
demo/configure-2149-# If we're using GNU nm, then use its standard symbol codes.
demo/configure:2150:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
demo/configure-2151-  symcode='[ABCDGISTW]'
demo/configure-2152-fi
demo/configure-2153-
demo/configure-2154-# Try without a prefix undercore, then with it.
demo/configure-2155-for ac_symprfx in "" "_"; do
--
demo/configure-3393-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
demo/configure-3394-    fi
demo/configure-3395-    ;;
demo/configure-3396-
demo/configure-3397-  solaris* | sysv5*)
demo/configure:3398:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
demo/configure-3399-      ld_shlibs=no
demo/configure-3400-      cat <<EOF 1>&2
demo/configure-3401-
demo/configure-3402-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
demo/configure-3403-*** create shared libraries on Solaris systems.  Therefore, libtool
--
depdemo/acinclude.m4-234-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
depdemo/acinclude.m4-235-  ;;
depdemo/acinclude.m4-236-esac
depdemo/acinclude.m4-237-
depdemo/acinclude.m4-238-# If we're using GNU nm, then use its standard symbol codes.
depdemo/acinclude.m4:239:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
depdemo/acinclude.m4-240-  symcode='[[ABCDGISTW]]'
depdemo/acinclude.m4-241-fi
depdemo/acinclude.m4-242-
depdemo/acinclude.m4-243-# Try without a prefix undercore, then with it.
depdemo/acinclude.m4-244-for ac_symprfx in "" "_"; do
--
depdemo/acinclude.m4-1372-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
depdemo/acinclude.m4-1373-    fi
depdemo/acinclude.m4-1374-    ;;
depdemo/acinclude.m4-1375-
depdemo/acinclude.m4-1376-  solaris* | sysv5*)
depdemo/acinclude.m4:1377:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
depdemo/acinclude.m4-1378-      ld_shlibs=no
depdemo/acinclude.m4-1379-      cat <<EOF 1>&2
depdemo/acinclude.m4-1380-
depdemo/acinclude.m4-1381-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
depdemo/acinclude.m4-1382-*** create shared libraries on Solaris systems.  Therefore, libtool
--
depdemo/acinclude.m4-3226-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
depdemo/acinclude.m4-3227-      lt_cv_path_LD="$ac_dir/$ac_prog"
depdemo/acinclude.m4-3228-      # Check to see if the program is GNU ld.  I'd rather use --version,
depdemo/acinclude.m4-3229-      # but apparently some GNU ld's only accept -v.
depdemo/acinclude.m4-3230-      # Break only if it was the GNU/non-GNU ld that we prefer.
depdemo/acinclude.m4:3231:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
depdemo/acinclude.m4-3232-	test "$with_gnu_ld" != no && break
depdemo/acinclude.m4-3233-      else
depdemo/acinclude.m4-3234-	test "$with_gnu_ld" != yes && break
depdemo/acinclude.m4-3235-      fi
depdemo/acinclude.m4-3236-    fi
--
depdemo/acinclude.m4-3251-
depdemo/acinclude.m4-3252-# AC_PROG_LD_GNU -
depdemo/acinclude.m4-3253-AC_DEFUN([AC_PROG_LD_GNU],
depdemo/acinclude.m4-3254-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
depdemo/acinclude.m4-3255-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
depdemo/acinclude.m4:3256:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
depdemo/acinclude.m4-3257-  lt_cv_prog_gnu_ld=yes
depdemo/acinclude.m4-3258-else
depdemo/acinclude.m4-3259-  lt_cv_prog_gnu_ld=no
depdemo/acinclude.m4-3260-fi])
depdemo/acinclude.m4-3261-with_gnu_ld=$lt_cv_prog_gnu_ld
--
depdemo/aclocal.m4-224-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
depdemo/aclocal.m4-225-  ;;
depdemo/aclocal.m4-226-esac
depdemo/aclocal.m4-227-
depdemo/aclocal.m4-228-# If we're using GNU nm, then use its standard symbol codes.
depdemo/aclocal.m4:229:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
depdemo/aclocal.m4-230-  symcode='[[ABCDGISTW]]'
depdemo/aclocal.m4-231-fi
depdemo/aclocal.m4-232-
depdemo/aclocal.m4-233-# Try without a prefix undercore, then with it.
depdemo/aclocal.m4-234-for ac_symprfx in "" "_"; do
--
depdemo/aclocal.m4-1336-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
depdemo/aclocal.m4-1337-    fi
depdemo/aclocal.m4-1338-    ;;
depdemo/aclocal.m4-1339-
depdemo/aclocal.m4-1340-  solaris* | sysv5*)
depdemo/aclocal.m4:1341:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
depdemo/aclocal.m4-1342-      ld_shlibs=no
depdemo/aclocal.m4-1343-      cat <<EOF 1>&2
depdemo/aclocal.m4-1344-
depdemo/aclocal.m4-1345-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
depdemo/aclocal.m4-1346-*** create shared libraries on Solaris systems.  Therefore, libtool
--
depdemo/aclocal.m4-3156-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
depdemo/aclocal.m4-3157-      lt_cv_path_LD="$ac_dir/$ac_prog"
depdemo/aclocal.m4-3158-      # Check to see if the program is GNU ld.  I'd rather use --version,
depdemo/aclocal.m4-3159-      # but apparently some GNU ld's only accept -v.
depdemo/aclocal.m4-3160-      # Break only if it was the GNU/non-GNU ld that we prefer.
depdemo/aclocal.m4:3161:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
depdemo/aclocal.m4-3162-	test "$with_gnu_ld" != no && break
depdemo/aclocal.m4-3163-      else
depdemo/aclocal.m4-3164-	test "$with_gnu_ld" != yes && break
depdemo/aclocal.m4-3165-      fi
depdemo/aclocal.m4-3166-    fi
--
depdemo/aclocal.m4-3181-
depdemo/aclocal.m4-3182-# AC_PROG_LD_GNU -
depdemo/aclocal.m4-3183-AC_DEFUN([AC_PROG_LD_GNU],
depdemo/aclocal.m4-3184-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
depdemo/aclocal.m4-3185-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
depdemo/aclocal.m4:3186:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
depdemo/aclocal.m4-3187-  lt_cv_prog_gnu_ld=yes
depdemo/aclocal.m4-3188-else
depdemo/aclocal.m4-3189-  lt_cv_prog_gnu_ld=no
depdemo/aclocal.m4-3190-fi])
depdemo/aclocal.m4-3191-with_gnu_ld=$lt_cv_prog_gnu_ld
--
depdemo/configure-1688-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
depdemo/configure-1689-      lt_cv_path_LD="$ac_dir/$ac_prog"
depdemo/configure-1690-      # Check to see if the program is GNU ld.  I'd rather use --version,
depdemo/configure-1691-      # but apparently some GNU ld's only accept -v.
depdemo/configure-1692-      # Break only if it was the GNU/non-GNU ld that we prefer.
depdemo/configure:1693:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
depdemo/configure-1694-	test "$with_gnu_ld" != no && break
depdemo/configure-1695-      else
depdemo/configure-1696-	test "$with_gnu_ld" != yes && break
depdemo/configure-1697-      fi
depdemo/configure-1698-    fi
--
depdemo/configure-1714-echo "configure:1715: checking if the linker ($LD) is GNU ld" >&5
depdemo/configure-1715-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
depdemo/configure-1716-  echo $ac_n "(cached) $ac_c" 1>&6
depdemo/configure-1717-else
depdemo/configure-1718-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
depdemo/configure:1719:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
depdemo/configure-1720-  lt_cv_prog_gnu_ld=yes
depdemo/configure-1721-else
depdemo/configure-1722-  lt_cv_prog_gnu_ld=no
depdemo/configure-1723-fi
depdemo/configure-1724-fi
--
depdemo/configure-2069-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
depdemo/configure-2070-  ;;
depdemo/configure-2071-esac
depdemo/configure-2072-
depdemo/configure-2073-# If we're using GNU nm, then use its standard symbol codes.
depdemo/configure:2074:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
depdemo/configure-2075-  symcode='[ABCDGISTW]'
depdemo/configure-2076-fi
depdemo/configure-2077-
depdemo/configure-2078-# Try without a prefix undercore, then with it.
depdemo/configure-2079-for ac_symprfx in "" "_"; do
--
depdemo/configure-3317-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
depdemo/configure-3318-    fi
depdemo/configure-3319-    ;;
depdemo/configure-3320-
depdemo/configure-3321-  solaris* | sysv5*)
depdemo/configure:3322:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
depdemo/configure-3323-      ld_shlibs=no
depdemo/configure-3324-      cat <<EOF 1>&2
depdemo/configure-3325-
depdemo/configure-3326-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
depdemo/configure-3327-*** create shared libraries on Solaris systems.  Therefore, libtool
--
libltdl/acinclude.m4-234-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
libltdl/acinclude.m4-235-  ;;
libltdl/acinclude.m4-236-esac
libltdl/acinclude.m4-237-
libltdl/acinclude.m4-238-# If we're using GNU nm, then use its standard symbol codes.
libltdl/acinclude.m4:239:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
libltdl/acinclude.m4-240-  symcode='[[ABCDGISTW]]'
libltdl/acinclude.m4-241-fi
libltdl/acinclude.m4-242-
libltdl/acinclude.m4-243-# Try without a prefix undercore, then with it.
libltdl/acinclude.m4-244-for ac_symprfx in "" "_"; do
--
libltdl/acinclude.m4-1372-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
libltdl/acinclude.m4-1373-    fi
libltdl/acinclude.m4-1374-    ;;
libltdl/acinclude.m4-1375-
libltdl/acinclude.m4-1376-  solaris* | sysv5*)
libltdl/acinclude.m4:1377:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
libltdl/acinclude.m4-1378-      ld_shlibs=no
libltdl/acinclude.m4-1379-      cat <<EOF 1>&2
libltdl/acinclude.m4-1380-
libltdl/acinclude.m4-1381-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
libltdl/acinclude.m4-1382-*** create shared libraries on Solaris systems.  Therefore, libtool
--
libltdl/acinclude.m4-3226-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
libltdl/acinclude.m4-3227-      lt_cv_path_LD="$ac_dir/$ac_prog"
libltdl/acinclude.m4-3228-      # Check to see if the program is GNU ld.  I'd rather use --version,
libltdl/acinclude.m4-3229-      # but apparently some GNU ld's only accept -v.
libltdl/acinclude.m4-3230-      # Break only if it was the GNU/non-GNU ld that we prefer.
libltdl/acinclude.m4:3231:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
libltdl/acinclude.m4-3232-	test "$with_gnu_ld" != no && break
libltdl/acinclude.m4-3233-      else
libltdl/acinclude.m4-3234-	test "$with_gnu_ld" != yes && break
libltdl/acinclude.m4-3235-      fi
libltdl/acinclude.m4-3236-    fi
--
libltdl/acinclude.m4-3251-
libltdl/acinclude.m4-3252-# AC_PROG_LD_GNU -
libltdl/acinclude.m4-3253-AC_DEFUN([AC_PROG_LD_GNU],
libltdl/acinclude.m4-3254-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
libltdl/acinclude.m4-3255-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
libltdl/acinclude.m4:3256:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
libltdl/acinclude.m4-3257-  lt_cv_prog_gnu_ld=yes
libltdl/acinclude.m4-3258-else
libltdl/acinclude.m4-3259-  lt_cv_prog_gnu_ld=no
libltdl/acinclude.m4-3260-fi])
libltdl/acinclude.m4-3261-with_gnu_ld=$lt_cv_prog_gnu_ld
--
libltdl/aclocal.m4-224-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
libltdl/aclocal.m4-225-  ;;
libltdl/aclocal.m4-226-esac
libltdl/aclocal.m4-227-
libltdl/aclocal.m4-228-# If we're using GNU nm, then use its standard symbol codes.
libltdl/aclocal.m4:229:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
libltdl/aclocal.m4-230-  symcode='[[ABCDGISTW]]'
libltdl/aclocal.m4-231-fi
libltdl/aclocal.m4-232-
libltdl/aclocal.m4-233-# Try without a prefix undercore, then with it.
libltdl/aclocal.m4-234-for ac_symprfx in "" "_"; do
--
libltdl/aclocal.m4-1336-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
libltdl/aclocal.m4-1337-    fi
libltdl/aclocal.m4-1338-    ;;
libltdl/aclocal.m4-1339-
libltdl/aclocal.m4-1340-  solaris* | sysv5*)
libltdl/aclocal.m4:1341:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
libltdl/aclocal.m4-1342-      ld_shlibs=no
libltdl/aclocal.m4-1343-      cat <<EOF 1>&2
libltdl/aclocal.m4-1344-
libltdl/aclocal.m4-1345-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
libltdl/aclocal.m4-1346-*** create shared libraries on Solaris systems.  Therefore, libtool
--
libltdl/aclocal.m4-3156-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
libltdl/aclocal.m4-3157-      lt_cv_path_LD="$ac_dir/$ac_prog"
libltdl/aclocal.m4-3158-      # Check to see if the program is GNU ld.  I'd rather use --version,
libltdl/aclocal.m4-3159-      # but apparently some GNU ld's only accept -v.
libltdl/aclocal.m4-3160-      # Break only if it was the GNU/non-GNU ld that we prefer.
libltdl/aclocal.m4:3161:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
libltdl/aclocal.m4-3162-	test "$with_gnu_ld" != no && break
libltdl/aclocal.m4-3163-      else
libltdl/aclocal.m4-3164-	test "$with_gnu_ld" != yes && break
libltdl/aclocal.m4-3165-      fi
libltdl/aclocal.m4-3166-    fi
--
libltdl/aclocal.m4-3181-
libltdl/aclocal.m4-3182-# AC_PROG_LD_GNU -
libltdl/aclocal.m4-3183-AC_DEFUN([AC_PROG_LD_GNU],
libltdl/aclocal.m4-3184-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
libltdl/aclocal.m4-3185-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
libltdl/aclocal.m4:3186:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
libltdl/aclocal.m4-3187-  lt_cv_prog_gnu_ld=yes
libltdl/aclocal.m4-3188-else
libltdl/aclocal.m4-3189-  lt_cv_prog_gnu_ld=no
libltdl/aclocal.m4-3190-fi])
libltdl/aclocal.m4-3191-with_gnu_ld=$lt_cv_prog_gnu_ld
--
libltdl/configure-1837-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
libltdl/configure-1838-      lt_cv_path_LD="$ac_dir/$ac_prog"
libltdl/configure-1839-      # Check to see if the program is GNU ld.  I'd rather use --version,
libltdl/configure-1840-      # but apparently some GNU ld's only accept -v.
libltdl/configure-1841-      # Break only if it was the GNU/non-GNU ld that we prefer.
libltdl/configure:1842:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
libltdl/configure-1843-	test "$with_gnu_ld" != no && break
libltdl/configure-1844-      else
libltdl/configure-1845-	test "$with_gnu_ld" != yes && break
libltdl/configure-1846-      fi
libltdl/configure-1847-    fi
--
libltdl/configure-1863-echo "configure:1864: checking if the linker ($LD) is GNU ld" >&5
libltdl/configure-1864-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
libltdl/configure-1865-  echo $ac_n "(cached) $ac_c" 1>&6
libltdl/configure-1866-else
libltdl/configure-1867-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
libltdl/configure:1868:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
libltdl/configure-1869-  lt_cv_prog_gnu_ld=yes
libltdl/configure-1870-else
libltdl/configure-1871-  lt_cv_prog_gnu_ld=no
libltdl/configure-1872-fi
libltdl/configure-1873-fi
--
libltdl/configure-2251-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
libltdl/configure-2252-  ;;
libltdl/configure-2253-esac
libltdl/configure-2254-
libltdl/configure-2255-# If we're using GNU nm, then use its standard symbol codes.
libltdl/configure:2256:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
libltdl/configure-2257-  symcode='[ABCDGISTW]'
libltdl/configure-2258-fi
libltdl/configure-2259-
libltdl/configure-2260-# Try without a prefix undercore, then with it.
libltdl/configure-2261-for ac_symprfx in "" "_"; do
--
libltdl/configure-3771-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
libltdl/configure-3772-    fi
libltdl/configure-3773-    ;;
libltdl/configure-3774-
libltdl/configure-3775-  solaris* | sysv5*)
libltdl/configure:3776:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
libltdl/configure-3777-      ld_shlibs=no
libltdl/configure-3778-      cat <<EOF 1>&2
libltdl/configure-3779-
libltdl/configure-3780-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
libltdl/configure-3781-*** create shared libraries on Solaris systems.  Therefore, libtool
--
libtool.m4-234-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
libtool.m4-235-  ;;
libtool.m4-236-esac
libtool.m4-237-
libtool.m4-238-# If we're using GNU nm, then use its standard symbol codes.
libtool.m4:239:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
libtool.m4-240-  symcode='[[ABCDGISTW]]'
libtool.m4-241-fi
libtool.m4-242-
libtool.m4-243-# Try without a prefix undercore, then with it.
libtool.m4-244-for ac_symprfx in "" "_"; do
--
libtool.m4-1372-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
libtool.m4-1373-    fi
libtool.m4-1374-    ;;
libtool.m4-1375-
libtool.m4-1376-  solaris* | sysv5*)
libtool.m4:1377:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
libtool.m4-1378-      ld_shlibs=no
libtool.m4-1379-      cat <<EOF 1>&2
libtool.m4-1380-
libtool.m4-1381-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
libtool.m4-1382-*** create shared libraries on Solaris systems.  Therefore, libtool
--
libtool.m4-3226-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
libtool.m4-3227-      lt_cv_path_LD="$ac_dir/$ac_prog"
libtool.m4-3228-      # Check to see if the program is GNU ld.  I'd rather use --version,
libtool.m4-3229-      # but apparently some GNU ld's only accept -v.
libtool.m4-3230-      # Break only if it was the GNU/non-GNU ld that we prefer.
libtool.m4:3231:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
libtool.m4-3232-	test "$with_gnu_ld" != no && break
libtool.m4-3233-      else
libtool.m4-3234-	test "$with_gnu_ld" != yes && break
libtool.m4-3235-      fi
libtool.m4-3236-    fi
--
libtool.m4-3251-
libtool.m4-3252-# AC_PROG_LD_GNU -
libtool.m4-3253-AC_DEFUN([AC_PROG_LD_GNU],
libtool.m4-3254-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
libtool.m4-3255-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
libtool.m4:3256:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
libtool.m4-3257-  lt_cv_prog_gnu_ld=yes
libtool.m4-3258-else
libtool.m4-3259-  lt_cv_prog_gnu_ld=no
libtool.m4-3260-fi])
libtool.m4-3261-with_gnu_ld=$lt_cv_prog_gnu_ld
--
mdemo/acinclude.m4-234-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
mdemo/acinclude.m4-235-  ;;
mdemo/acinclude.m4-236-esac
mdemo/acinclude.m4-237-
mdemo/acinclude.m4-238-# If we're using GNU nm, then use its standard symbol codes.
mdemo/acinclude.m4:239:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
mdemo/acinclude.m4-240-  symcode='[[ABCDGISTW]]'
mdemo/acinclude.m4-241-fi
mdemo/acinclude.m4-242-
mdemo/acinclude.m4-243-# Try without a prefix undercore, then with it.
mdemo/acinclude.m4-244-for ac_symprfx in "" "_"; do
--
mdemo/acinclude.m4-1372-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
mdemo/acinclude.m4-1373-    fi
mdemo/acinclude.m4-1374-    ;;
mdemo/acinclude.m4-1375-
mdemo/acinclude.m4-1376-  solaris* | sysv5*)
mdemo/acinclude.m4:1377:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
mdemo/acinclude.m4-1378-      ld_shlibs=no
mdemo/acinclude.m4-1379-      cat <<EOF 1>&2
mdemo/acinclude.m4-1380-
mdemo/acinclude.m4-1381-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
mdemo/acinclude.m4-1382-*** create shared libraries on Solaris systems.  Therefore, libtool
--
mdemo/acinclude.m4-3226-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
mdemo/acinclude.m4-3227-      lt_cv_path_LD="$ac_dir/$ac_prog"
mdemo/acinclude.m4-3228-      # Check to see if the program is GNU ld.  I'd rather use --version,
mdemo/acinclude.m4-3229-      # but apparently some GNU ld's only accept -v.
mdemo/acinclude.m4-3230-      # Break only if it was the GNU/non-GNU ld that we prefer.
mdemo/acinclude.m4:3231:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
mdemo/acinclude.m4-3232-	test "$with_gnu_ld" != no && break
mdemo/acinclude.m4-3233-      else
mdemo/acinclude.m4-3234-	test "$with_gnu_ld" != yes && break
mdemo/acinclude.m4-3235-      fi
mdemo/acinclude.m4-3236-    fi
--
mdemo/acinclude.m4-3251-
mdemo/acinclude.m4-3252-# AC_PROG_LD_GNU -
mdemo/acinclude.m4-3253-AC_DEFUN([AC_PROG_LD_GNU],
mdemo/acinclude.m4-3254-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
mdemo/acinclude.m4-3255-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
mdemo/acinclude.m4:3256:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
mdemo/acinclude.m4-3257-  lt_cv_prog_gnu_ld=yes
mdemo/acinclude.m4-3258-else
mdemo/acinclude.m4-3259-  lt_cv_prog_gnu_ld=no
mdemo/acinclude.m4-3260-fi])
mdemo/acinclude.m4-3261-with_gnu_ld=$lt_cv_prog_gnu_ld
--
mdemo/aclocal.m4-224-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
mdemo/aclocal.m4-225-  ;;
mdemo/aclocal.m4-226-esac
mdemo/aclocal.m4-227-
mdemo/aclocal.m4-228-# If we're using GNU nm, then use its standard symbol codes.
mdemo/aclocal.m4:229:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
mdemo/aclocal.m4-230-  symcode='[[ABCDGISTW]]'
mdemo/aclocal.m4-231-fi
mdemo/aclocal.m4-232-
mdemo/aclocal.m4-233-# Try without a prefix undercore, then with it.
mdemo/aclocal.m4-234-for ac_symprfx in "" "_"; do
--
mdemo/aclocal.m4-1336-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
mdemo/aclocal.m4-1337-    fi
mdemo/aclocal.m4-1338-    ;;
mdemo/aclocal.m4-1339-
mdemo/aclocal.m4-1340-  solaris* | sysv5*)
mdemo/aclocal.m4:1341:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
mdemo/aclocal.m4-1342-      ld_shlibs=no
mdemo/aclocal.m4-1343-      cat <<EOF 1>&2
mdemo/aclocal.m4-1344-
mdemo/aclocal.m4-1345-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
mdemo/aclocal.m4-1346-*** create shared libraries on Solaris systems.  Therefore, libtool
--
mdemo/aclocal.m4-3156-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
mdemo/aclocal.m4-3157-      lt_cv_path_LD="$ac_dir/$ac_prog"
mdemo/aclocal.m4-3158-      # Check to see if the program is GNU ld.  I'd rather use --version,
mdemo/aclocal.m4-3159-      # but apparently some GNU ld's only accept -v.
mdemo/aclocal.m4-3160-      # Break only if it was the GNU/non-GNU ld that we prefer.
mdemo/aclocal.m4:3161:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
mdemo/aclocal.m4-3162-	test "$with_gnu_ld" != no && break
mdemo/aclocal.m4-3163-      else
mdemo/aclocal.m4-3164-	test "$with_gnu_ld" != yes && break
mdemo/aclocal.m4-3165-      fi
mdemo/aclocal.m4-3166-    fi
--
mdemo/aclocal.m4-3181-
mdemo/aclocal.m4-3182-# AC_PROG_LD_GNU -
mdemo/aclocal.m4-3183-AC_DEFUN([AC_PROG_LD_GNU],
mdemo/aclocal.m4-3184-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
mdemo/aclocal.m4-3185-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
mdemo/aclocal.m4:3186:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
mdemo/aclocal.m4-3187-  lt_cv_prog_gnu_ld=yes
mdemo/aclocal.m4-3188-else
mdemo/aclocal.m4-3189-  lt_cv_prog_gnu_ld=no
mdemo/aclocal.m4-3190-fi])
mdemo/aclocal.m4-3191-with_gnu_ld=$lt_cv_prog_gnu_ld
--
mdemo/configure-1777-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
mdemo/configure-1778-      lt_cv_path_LD="$ac_dir/$ac_prog"
mdemo/configure-1779-      # Check to see if the program is GNU ld.  I'd rather use --version,
mdemo/configure-1780-      # but apparently some GNU ld's only accept -v.
mdemo/configure-1781-      # Break only if it was the GNU/non-GNU ld that we prefer.
mdemo/configure:1782:      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
mdemo/configure-1783-	test "$with_gnu_ld" != no && break
mdemo/configure-1784-      else
mdemo/configure-1785-	test "$with_gnu_ld" != yes && break
mdemo/configure-1786-      fi
mdemo/configure-1787-    fi
--
mdemo/configure-1803-echo "configure:1804: checking if the linker ($LD) is GNU ld" >&5
mdemo/configure-1804-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
mdemo/configure-1805-  echo $ac_n "(cached) $ac_c" 1>&6
mdemo/configure-1806-else
mdemo/configure-1807-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
mdemo/configure:1808:if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
mdemo/configure-1809-  lt_cv_prog_gnu_ld=yes
mdemo/configure-1810-else
mdemo/configure-1811-  lt_cv_prog_gnu_ld=no
mdemo/configure-1812-fi
mdemo/configure-1813-fi
--
mdemo/configure-2158-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
mdemo/configure-2159-  ;;
mdemo/configure-2160-esac
mdemo/configure-2161-
mdemo/configure-2162-# If we're using GNU nm, then use its standard symbol codes.
mdemo/configure:2163:if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
mdemo/configure-2164-  symcode='[ABCDGISTW]'
mdemo/configure-2165-fi
mdemo/configure-2166-
mdemo/configure-2167-# Try without a prefix undercore, then with it.
mdemo/configure-2168-for ac_symprfx in "" "_"; do
--
mdemo/configure-3678-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
mdemo/configure-3679-    fi
mdemo/configure-3680-    ;;
mdemo/configure-3681-
mdemo/configure-3682-  solaris* | sysv5*)
mdemo/configure:3683:    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
mdemo/configure-3684-      ld_shlibs=no
mdemo/configure-3685-      cat <<EOF 1>&2
mdemo/configure-3686-
mdemo/configure-3687-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
mdemo/configure-3688-*** create shared libraries on Solaris systems.  Therefore, libtool