[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Solaris patch for libtool 1.4.2
From: |
Petter Reinholdtsen |
Subject: |
Solaris patch for libtool 1.4.2 |
Date: |
Tue, 4 Jun 2002 11:52:29 +0200 |
I ran into a small problem on Solaris, where the generated libtool
script failed with 'test: =: unary operator expected'. I tracked it
down to some missing "" around the $pic_mode test argument. The
following patch fixes this and several other similar lines.
diff -ur src-1.4.2/ltmain.in src-1.4.2-local/ltmain.in
--- src-1.4.2/ltmain.in Tue Sep 11 01:40:18 2001
+++ src-1.4.2-local/ltmain.in Tue Jun 4 11:00:11 2002
@@ -467,7 +467,7 @@
pic_mode=default
;;
esac
- if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
# non-PIC code in shared libraries is not supported
pic_mode=default
fi
@@ -543,7 +543,7 @@
$show "$mkdir $dir"
$run $mkdir $dir
status=$?
- if test $status -ne 0 && test ! -d $dir; then
+ if test "$status" -ne 0 && test ! -d $dir; then
exit $status
fi
fi
@@ -1307,7 +1307,7 @@
$show "$mkdir $output_objdir"
$run $mkdir $output_objdir
status=$?
- if test $status -ne 0 && test ! -d $output_objdir; then
+ if test "$status" -ne 0 && test ! -d $output_objdir; then
exit $status
fi
fi
@@ -1366,7 +1366,7 @@
;;
esac
for pass in $passes; do
- if test $linkmode = prog; then
+ if test "$linkmode" = prog; then
# Determine which files to process
case $pass in
dlopen)
@@ -1383,11 +1383,11 @@
found=no
case $deplib in
-l*)
- if test $linkmode = oldlib && test $linkmode = obj; then
+ if test "$linkmode" = oldlib && test "$linkmode" = obj; then
$echo "$modename: warning: \`-l' is ignored for archives/objects:
$deplib" 1>&2
continue
fi
- if test $pass = conv; then
+ if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
@@ -1407,7 +1407,7 @@
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- test $linkmode = lib && newdependency_libs="$deplib
$newdependency_libs"
+ test "$linkmode" = lib && newdependency_libs="$deplib
$newdependency_libs"
fi
continue
fi
@@ -1416,16 +1416,16 @@
case $linkmode in
lib)
deplibs="$deplib $deplibs"
- test $pass = conv && continue
+ test "$pass" = conv && continue
newdependency_libs="$deplib $newdependency_libs"
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed
-e 's/^-L//'`
;;
prog)
- if test $pass = conv; then
+ if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
- if test $pass = scan; then
+ if test "$pass" = scan; then
deplibs="$deplib $deplibs"
newlib_search_path="$newlib_search_path "`$echo "X$deplib" |
$Xsed -e 's/^-L//'`
else
@@ -1440,7 +1440,7 @@
continue
;; # -L
-R*)
- if test $pass = link; then
+ if test "$pass" = link; then
dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
@@ -1453,7 +1453,7 @@
;;
*.la) lib="$deplib" ;;
*.$libext)
- if test $pass = conv; then
+ if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
@@ -1474,7 +1474,7 @@
continue
;;
prog)
- if test $pass != link; then
+ if test "$pass" != link; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
@@ -1485,7 +1485,7 @@
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
- if test $pass = dlpreopen || test "$dlopen_support" != yes || test
"$build_libtool_libs" = no; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test
"$build_libtool_libs" = no; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
newdlprefiles="$newdlprefiles $deplib"
@@ -1501,7 +1501,7 @@
continue
;;
esac # case $deplib
- if test $found = yes || test -f "$lib"; then :
+ if test "$found" = yes || test -f "$lib"; then :
else
$echo "$modename: cannot find the library \`$lib'" 1>&2
exit 1
@@ -1535,13 +1535,13 @@
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
- { test $linkmode = oldlib && test $linkmode = obj; }; then
+ { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then
# Add dl[pre]opened files of deplib
test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
fi
- if test $pass = conv; then
+ if test "$pass" = conv; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
@@ -1560,7 +1560,7 @@
esac
tmp_libs="$tmp_libs $deplib"
done
- elif test $linkmode != prog && test $linkmode != lib; then
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
$echo "$modename: \`$lib' is not a convenience library" 1>&2
exit 1
fi
@@ -1578,7 +1578,7 @@
fi
# This library was specified with -dlopen.
- if test $pass = dlopen; then
+ if test "$pass" = dlopen; then
if test -z "$libdir"; then
$echo "$modename: cannot -dlopen a convenience library: \`$lib'"
1>&2
exit 1
@@ -1627,7 +1627,7 @@
name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
# This library was specified with -dlpreopen.
- if test $pass = dlpreopen; then
+ if test "$pass" = dlpreopen; then
if test -z "$libdir"; then
$echo "$modename: cannot -dlpreopen a convenience library: \`$lib'"
1>&2
exit 1
@@ -1646,7 +1646,7 @@
if test -z "$libdir"; then
# Link the convenience library
- if test $linkmode = lib; then
+ if test "$linkmode" = lib; then
deplibs="$dir/$old_library $deplibs"
elif test "$linkmode,$pass" = "prog,link"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
@@ -1657,7 +1657,7 @@
continue
fi
- if test $linkmode = prog && test $pass != link; then
+ if test "$linkmode" = prog && test "$pass" != link; then
newlib_search_path="$newlib_search_path $ladir"
deplibs="$lib $deplibs"
@@ -1673,7 +1673,7 @@
-L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" |
$Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
esac
# Need to link against all dependency_libs?
- if test $linkalldeplibs = yes; then
+ if test "$linkalldeplibs" = yes; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
@@ -1694,7 +1694,7 @@
# Link against this shared library
if test "$linkmode,$pass" = "prog,link" ||
- { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
+ { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
@@ -1716,7 +1716,7 @@
esac
;;
esac
- if test $linkmode = prog; then
+ if test "$linkmode" = prog; then
# We need to hardcode the library path
if test -n "$shlibpath_var"; then
# Make sure the rpath contains only unique directories.
@@ -1800,7 +1800,7 @@
linklib=$newlib
fi # test -n $old_archive_from_expsyms_cmds
- if test $linkmode = prog || test "$mode" != relink; then
+ if test "$linkmode" = prog || test "$mode" != relink; then
add_shlibpath=
add_dir=
add=
@@ -1849,7 +1849,7 @@
*) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
esac
fi
- if test $linkmode = prog; then
+ if test "$linkmode" = prog; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
@@ -1866,7 +1866,7 @@
fi
fi
- if test $linkmode = prog || test "$mode" = relink; then
+ if test "$linkmode" = prog || test "$mode" = relink; then
add_shlibpath=
add_dir=
add=
@@ -1888,7 +1888,7 @@
add="-l$name"
fi
- if test $linkmode = prog; then
+ if test "$linkmode" = prog; then
test -n "$add_dir" && finalize_deplibs="$add_dir
$finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
@@ -1896,7 +1896,7 @@
test -n "$add" && deplibs="$add $deplibs"
fi
fi
- elif test $linkmode = prog; then
+ elif test "$linkmode" = prog; then
if test "$alldeplibs" = yes &&
{ test "$deplibs_check_method" = pass_all ||
{ test "$build_libtool_libs" = yes &&
@@ -1955,10 +1955,10 @@
fi
fi # link shared/static library?
- if test $linkmode = lib; then
+ if test "$linkmode" = lib; then
if test -n "$dependency_libs" &&
- { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
- test $link_static = yes; }; then
+ { test "$hardcode_into_libs" != yes || test "$build_old_libs" =
yes ||
+ test "$link_static" = yes; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
@@ -1987,7 +1987,7 @@
tmp_libs="$tmp_libs $deplib"
done
- if test $link_all_deplibs != no; then
+ if test "$link_all_deplibs" != no; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
case $deplib in
@@ -2030,15 +2030,15 @@
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
- if test $pass = dlpreopen; then
+ if test "$pass" = dlpreopen; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
- if test $pass != dlopen; then
- test $pass != scan && dependency_libs="$newdependency_libs"
- if test $pass != conv; then
+ if test "$pass" != dlopen; then
+ test "$pass" != scan && dependency_libs="$newdependency_libs"
+ if test "$pass" != conv; then
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
@@ -2096,7 +2096,7 @@
deplibs=
fi
done # for pass
- if test $linkmode = prog; then
+ if test "$linkmode" = prog; then
dlfiles="$newdlfiles"
dlprefiles="$newdlprefiles"
fi
@@ -2240,7 +2240,7 @@
;;
esac
- if test $age -gt $current; then
+ if test "$age" -gt $current; then
$echo "$modename: AGE \`$age' is greater than the current interface
number \`$current'" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit 1
@@ -2279,7 +2279,7 @@
# Add in all the interfaces that we are compatible with.
loop=$revision
- while test $loop != 0; do
+ while test "$loop" != 0; do
iface=`expr $revision - $loop`
loop=`expr $loop - 1`
verstring="sgi$major.$iface:$verstring"
@@ -2302,7 +2302,7 @@
# Add in all the interfaces that we are compatible with.
loop=$age
- while test $loop != 0; do
+ while test "$loop" != 0; do
iface=`expr $current - $loop`
loop=`expr $loop - 1`
verstring="$verstring:${iface}.0"
@@ -2403,7 +2403,7 @@
*) finalize_rpath="$finalize_rpath $libdir" ;;
esac
done
- if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes;
then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
@@ -2446,7 +2446,7 @@
;;
*)
# Add libc to deplibs on all other systems if necessary.
- if test $build_libtool_need_lc = "yes"; then
+ if test "$build_libtool_need_lc" = "yes"; then
deplibs="$deplibs -lc"
fi
;;
@@ -2692,7 +2692,7 @@
echo "*** automatically added whenever a program is linked with
this library"
echo "*** or is declared to -dlopen it."
- if test $allow_undefined = no; then
+ if test "$allow_undefined" = no; then
echo
echo "*** Since this library must not contain undefined symbols,"
echo "*** because either the platform does not support them or"
@@ -2719,7 +2719,7 @@
# Test again, we may have decided not to build it any more
if test "$build_libtool_libs" = yes; then
- if test $hardcode_into_libs = yes; then
+ if test "$hardcode_into_libs" = yes; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
@@ -2850,7 +2850,7 @@
$show "mkdir $gentop"
$run mkdir "$gentop"
status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
exit $status
fi
generated="$generated $gentop"
@@ -2869,7 +2869,7 @@
$show "mkdir $xdir"
$run mkdir "$xdir"
status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
+ if test "$status" -ne 0 && test ! -d "$xdir"; then
exit $status
fi
$show "(cd $xdir && $AR x $xabs)"
@@ -2989,7 +2989,7 @@
$show "mkdir $gentop"
$run mkdir "$gentop"
status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
exit $status
fi
generated="$generated $gentop"
@@ -3008,7 +3008,7 @@
$show "mkdir $xdir"
$run mkdir "$xdir"
status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
+ if test "$status" -ne 0 && test ! -d "$xdir"; then
exit $status
fi
$show "(cd $xdir && $AR x $xabs)"
@@ -3403,7 +3403,7 @@
finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%
@address@hidden"`
fi
- if test $need_relink = no || test "$build_libtool_libs" != yes; then
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
compile_command=`$echo "X$compile_command" | $Xsed -e
'address@hidden@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
@@ -3771,7 +3771,7 @@
$show "mkdir $gentop"
$run mkdir "$gentop"
status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
exit $status
fi
generated="$generated $gentop"
@@ -3791,7 +3791,7 @@
$show "mkdir $xdir"
$run mkdir "$xdir"
status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
+ if test "$status" -ne 0 && test ! -d "$xdir"; then
exit $status
fi
$show "(cd $xdir && $AR x $xabs)"
@@ -3948,7 +3948,7 @@
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
- if test "$installed" = no && test $need_relink = yes; then
+ if test "$installed" = no && test "$need_relink" = yes; then
$echo >> $output "\
relink_command=\"$relink_command\""
fi
@@ -4660,10 +4660,10 @@
objdir="$dir/$objdir"
fi
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test $mode = uninstall && objdir="$dir"
+ test "$mode" = uninstall && objdir="$dir"
# Remember objdir for removal later, being careful to avoid duplicates
- if test $mode = clean; then
+ if test "$mode" = clean; then
case " $rmdirs " in
*" $objdir "*) ;;
*) rmdirs="$rmdirs $objdir" ;;
@@ -4695,9 +4695,9 @@
rmfiles="$rmfiles $objdir/$n"
done
test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
- test $mode = clean && rmfiles="$rmfiles $objdir/$name
$objdir/${name}i"
+ test "$mode" = clean && rmfiles="$rmfiles $objdir/$name
$objdir/${name}i"
- if test $mode = uninstall; then
+ if test "$mode" = uninstall; then
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
eval cmds=\"$postuninstall_cmds\"
@@ -4741,7 +4741,7 @@
*)
# Do a test to see if this is a libtool program.
- if test $mode = clean &&
+ if test "$mode" = clean &&
(sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null
2>&1; then
relink_command=
. $dir/$file
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Solaris patch for libtool 1.4.2,
Petter Reinholdtsen <=