bug-libtool
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

CCDia®MicroSpeed: demand for life time eight times exceeded


From: Jörg Schnitzler
Subject: CCDia®MicroSpeed: demand for life time eight times exceeded
Date: Tue, 14 Dec 2004 09:00:41 +0100

CCDia®MicroSpeed

 

Routing of FR 4, DS1.6 mm: life time eight times exceeded.

 

 

Dear Sir or Madam  ,

please find enclosed the latest news on mechanical processing of PCBs:

 

 

Routing 3 panels per stack FR 4, through-hole plating with a thickness of 1.6 mm

Medium-sized PCB producers benefit as well using diamond coated routers. An European user achieved brilliant results routing FR 4.

 

Application data:

Type of Router: 1 100 2000 090 (2,00 mm) spiral patterned geometry (www.gctool.com) CCDia®MicroSpeed coated (CemeCon)

3 panels per stack FR 4 DS, with a thickness of 1.6 mm
Cutting parameter: revolution n=30,000 1/min;
feed rate f=1.2 m/min; life time uncoated 40 m.

 

Result: Life time eight times exceeded

 

 

CemeCon will grant further licences for diamond coated PCB tools

Würselen, Germany: The only producer of diamond coatings for PCB tools world wide plans to grant up to five long term licences to tool manufacturers. “Only by concentrating our resources on a few licensees we will be able to assure the area-wide supply of CCDia®MicroSpeed coated tools that is required from the market”, states Dr. Kraus Marketing, CemeCon. Due to the already started negotiations CemeCon expects the closing of the respective licence agreements within the first quarter of 2005.

 

 

CCDia®Microspeed

Through CCDia®Microspeed, CemeCon has developed a diamond coating which utilises the elementary properties of this material. Diamond is the hardest material of the world, is extremely smooth and exhibits an extremely low tendency of sticking with respect to hydrocarbons. These advantages have an immediate effect on the production process: The significantly extended tool life by a factor of at least six results in cost savings of approximately 40%.

 

 

Who is CemeCon?

Since 1986 the coating expert CemeCon, Würselen, Germany is considered as one of the first-rate vendors when it comes to high-quality coatings for high-performance tools and components. At Würselen, Germany CemeCon is operating the world-wide largest coating centre and is the world market leader in the area of wear protection coatings of diamond tools. With growth rates of over 50 % per year since the beginning of the Nineties, these are gaining prominence in industrial cutting operations, in particular in connection with compound materials, graphite and AlSi alloys. In these areas, these tools are very much superior to uncoated tools.

 

 

Do you have any further questions or would you like to receive or cancel our free newsletter? Then simply send a message to the e-mail address given below or join our PCB-News site www.cemecon.com/produkte/pcb.

 

With kind regards

 

Jörg Schnitzler

Marketing/ Communication

 

CemeCon AG

Adenauerstr. 20 B1

52146 Würselen

Germany

Tel: 0049 2405 44 70 162

Fax: 0049 2405 44 70 199

E-Mail: address@hiddencom

URL: www.cemecon.com

 


reply via email to

[Prev in Thread] Current Thread [Next in Thread]