[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
testsuite: 24 25 64 failed
|
From: |
Nix |
|
Subject: |
testsuite: 24 25 64 failed |
|
Date: |
Fri, 21 Mar 2008 19:01:13 +0000 |
|
User-agent: |
Gnus/5.1008 (Gnus v5.10.8) XEmacs/21.5-b28 (linux) |
This is with libtool tagged as release-2-2, GCC 4.2.4 20080217, binutils
2.18.20070911. (I normally have quite an elaborate config.site, a
modified compiler specs file, and an earlier-installed copy of libtool
1.5.26, but I've removed or deactivated all of these for this test ---
or I tried to, but libtool wouldn't entirely let me. See below.)
/bin/sh is bash 3.2.9(1)-release; the shell in use in this environment
normally is zsh 4.3.5.
(The builddir is on NFS, but it fails just the same if I try it on a
non-NFS-mounted filesystem.)
The underlying cause of test 24's failure appears to be that LDFLAGS is
not consistently propagated down: note that a lot of the link steps do
not pass in my LDFLAGS of -specs=specs.no-as-needed, so get linked with
--as-needed (which is the default on my system) and subsequently
fail. (FWIW the only things I've ever seen fail with --as-needed are
linker-semantics testsuites like this one. :)
Test 25's failure is weirder and I don't know what its cause might be yet.
Test 64 doesn't seem to have any failure details in the log at all.
## ----------------------- ##
## libtool 2.2 test suite. ##
## ----------------------- ##
testsuite: command line was:
$ /usr/packages/libtool/i686-hades/tests/testsuite MAKE=make CC=gcc CFLAGS=-g
-O2 CPP=gcc -E CPPFLAGS= LD=/usr/bin/ld LDFLAGS=-specs=specs.no-as-needed
LIBS=-ldl LN_S=ln -s NM=/usr/bin/nm -B RANLIB=ranlib STRIP=strip OBJEXT=o
EXEEXT= SHELL=/bin/sh CONFIG_SHELL=/bin/sh CXX=g++ CXXFLAGS=-g -O2 CXXCPP=g++
-E F77=g77 FFLAGS=-g -O2 FC=gfortran FCFLAGS=-g -O2 GCJ=gcj GCJFLAGS=-g -O2
_lt_pkgdatadir=/usr/packages/libtool/i686-hades
LIBTOOLIZE=/usr/packages/libtool/i686-hades/libtoolize
LIBTOOL=/usr/packages/libtool/i686-hades/libtool
tst_aclocaldir=/usr/packages/libtool/i686-hades/libltdl/m4
## ----------- ##
## ChangeLogs. ##
## ----------- ##
testsuite: ../ChangeLog:
| 2008-03-01 Gary V. Vaughan <address@hidden>
|
| GNU Libtool 2.2 was released.
|
| * configure.ac, libltdl/configure.ac (AC_INIT): Bump version
| number to 2.2.
| * NEWS: Updated.
|
| * tests/lt_dladvise.at, tests/lt_dlexit.at,
| tests/need_lib_prefix.at: Skip these tests when called from
## --------- ##
## Platform. ##
## --------- ##
hostname = hades
uname -m = i686
uname -r = 2.6.24.3-dirty
uname -s = Linux
uname -v = #1 PREEMPT Wed Mar 19 23:18:15 GMT 2008
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = i686
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/packages/libtool/i686-hades/tests
PATH: /home/compiler/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/games
testsuite: atconfig:
| # Configurable variable values for building test suites.
| # Generated by ./config.status.
| # Copyright (C) 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
|
| # The test suite will define top_srcdir=/../.. etc.
| at_testdir='tests'
| abs_builddir='/usr/packages/libtool/i686-hades/tests'
| at_srcdir='.'
| abs_srcdir='/usr/packages/libtool/i686-hades/tests'
| at_top_srcdir='..'
| abs_top_srcdir='/usr/packages/libtool/i686-hades'
| at_top_build_prefix='../'
| abs_top_builddir='/usr/packages/libtool/i686-hades'
|
| # Backward compatibility with Autotest <= 2.59b:
| at_top_builddir=$at_top_build_prefix
|
| AUTOTEST_PATH='tests'
|
| SHELL=${CONFIG_SHELL-'/bin/sh'}
## ---------------- ##
## Tested programs. ##
## ---------------- ##
## ------------------ ##
## Running the tests. ##
## ------------------ ##
testsuite: starting at: Fri Mar 21 18:22:55 GMT 2008
1. libtoolize macro installation (libtoolize.at:79): ok (0m0.206s 0m0.314s)
2. libtoolize macro serial update (libtoolize.at:103): ok (0m1.060s
0m1.748s)
3. libtoolize config files serial update (libtoolize.at:194): ok
(0m1.431s 0m2.708s)
4. diagnose missing LT_CONFIG_LTDL_DIR (libtoolize.at:296): ok (0m0.555s
0m1.055s)
5. copy ltdl.m4 with shared macro directory (libtoolize.at:436): ok
(0m0.410s 0m0.663s)
6. correctly parse LTDL_INIT from configure.ac (libtoolize.at:448): ok
(0m0.406s 0m0.665s)
7. diagnose missing LTDL_INIT invocation (libtoolize.at:460): ok
(0m0.514s 0m0.995s)
8. upgrading verbatim style aclocal.m4 (libtoolize.at:536): ok (0m8.501s
0m2.251s)
9. nonrecursive ltdl with AC_CONFIG_MACRO_DIR (libtoolize.at:660): ok
(0m0.538s 0m1.149s)
10. subproject ltdl with non-shared directories (libtoolize.at:727): ok
(0m0.685s 0m1.457s)
11. duplicate members in archive tests (duplicate_members.at:26): ok
(0m1.702s 0m0.829s)
12. duplicate convenience archive names (duplicate_conv.at:25): ok
(0m2.982s 0m1.212s)
14. inherited_linker_flags (inherited_flags.at:26): ok (0m2.151s 0m1.085s)
15. C convenience archives (convenience.at:30): ok (0m3.177s 0m1.272s)
16. C++ convenience archives (convenience.at:69): ok (0m5.333s 0m1.594s)
17. F77 convenience archives (convenience.at:109): ok (0m3.429s 0m1.384s)
18. FC convenience archives (convenience.at:169): ok (0m3.964s 0m1.639s)
19. Java convenience archives (convenience.at:229): ok (0m11.343s 0m2.520s)
20. Link order test. (link-order.at:26): ok (0m4.254s 0m1.480s)
21. Link order of deplibs. (link-order2.at:46): ok (0m5.393s 0m1.910s)
22. Failure tests (fail.at:27): ok (0m0.987s 0m0.355s)
23. shlibpath_overrides_runpath (shlibpath.at:25): ok (0m1.891s 0m0.585s)
26. Export test (export.at:25): ok (0m5.365s 0m2.225s)
27. sys_lib_search_path (search-path.at:25): ok (0m0.530s 0m0.142s)
28. indirect convenience (indirect_deps.at:25): ok (0m2.633s 0m1.036s)
29. indirect uninstalled (indirect_deps.at:71): ok (0m3.127s 0m1.230s)
31. Simple DESTDIR install (destdir.at:48): ok (0m1.038s 0m0.471s)
32. DESTDIR with in-package deplibs (destdir.at:75): ok (0m3.746s 0m1.457s)
33. AM_PROG_LIBTOOL (old-m4-iface.at:40): ok (0m6.866s 0m3.120s)
34. AC_WITH_LTDL (old-m4-iface.at:107): ok (0m33.062s 0m11.186s)
35. C subdir-objects (am-subdir.at:33): ok (0m17.075s 0m4.073s)
36. C++ subdir-objects (am-subdir.at:93): ok (0m20.013s 0m4.957s)
37. lt_dlexit unloading libs (lt_dlexit.at:30): ok (0m1.212s 0m0.399s)
38. lt_dlopenadvise library loading (lt_dladvise.at:28): ok (0m1.945s
0m0.603s)
39. enforced lib prefix (need_lib_prefix.at:25): ok (0m1.833s 0m0.696s)
40. compiling softlinked libltdl (standalone.at:31): ok (0m13.898s 0m6.369s)
41. compiling copied libltdl (standalone.at:46): ok (0m14.044s 0m6.295s)
42. installable libltdl (standalone.at:61): ok (0m14.317s 0m6.647s)
43. linking libltdl without autotools (standalone.at:79): ok (0m14.492s
0m6.586s)
44. compiling softlinked libltdl (subproject.at:57): ok (0m34.558s 0m11.397s)
45. compiling copied libltdl (subproject.at:73): ok (0m35.387s 0m11.880s)
46. installable libltdl (subproject.at:89): ok (0m41.852s 0m12.683s)
47. linking libltdl without autotools (subproject.at:109): ok (0m14.697s
0m6.700s)
48. compiling softlinked libltdl (nonrecursive.at:78): ok (0m28.987s
0m6.994s)
49. compiling copied libltdl (nonrecursive.at:102): ok (0m29.255s 0m7.603s)
50. installable libltdl (nonrecursive.at:126): ok (0m35.636s 0m8.198s)
51. compiling softlinked libltdl (recursive.at:60): ok (0m46.264s 0m8.979s)
52. compiling copied libltdl (recursive.at:80): ok (0m46.509s 0m9.430s)
53. installable libltdl (recursive.at:100): ok (0m53.422s 0m10.512s)
54. simple template test (template.at:27): ok (0m1.693s 0m0.524s)
55. template test with subdirs (template.at:126): ok (0m7.323s 0m2.171s)
56. C++ static constructors (ctor.at:27): ok (0m1.281s 0m0.439s)
57. config.status (early-libtool.at:32): ok (0m14.165s 0m3.590s)
58. config.lt (early-libtool.at:126): ok (0m16.292s 0m4.220s)
60. installable libltdl (configure-iface.at:102): ok (0m37.033s 0m11.989s)
61. --with-ltdl-include/lib (configure-iface.at:159): ok (0m43.836s
0m17.376s)
62. --with-included-ltdl (configure-iface.at:225): ok (0m35.960s 0m11.317s)
63. Link option thorough search test (stresstest.at:31): ok (1m44.948s
0m43.137s)
testsuite: ending at: Fri Mar 21 18:52:54 GMT 2008
testsuite: test suite duration: 0h 29m 59s
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 64 tests were run,
6 failed (3 expected failures).
## ------------------------ ##
## Summary of the failures. ##
## ------------------------ ##
Failed tests:
libtool 2.2 test suite test groups:
NUM: FILE-NAME:LINE TEST-GROUP-NAME
KEYWORDS
24: runpath-in-lalib.at:25 Runpath in libtool library files
libtool
25: static.at:68 static linking flags for programs
libtool
64: cmdline_wrap.at:28 Run tests with low max_cmd_len
recursive
## ---------------------- ##
## Detailed failed tests. ##
## ---------------------- ##
# -*- compilation -*-
24. runpath-in-lalib.at:25: testing ...
libtool: compile: gcc -g -O2 -c a.c -fPIC -DPIC -o .libs/a.o
libtool: compile: gcc -g -O2 -c b.c -fPIC -DPIC -o .libs/b.o
./runpath-in-lalib.at:51: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la
a.lo -rpath $libdir -R$addrunpath
stderr:
stdout:
libtool: link: gcc -shared .libs/a.o -Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/foobar
-Wl,-soname -Wl,liba.so.0 -o .libs/liba.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba.so.0" && ln -s "liba.so.0.0.0"
"liba.so.0")
libtool: link: (cd ".libs" && rm -f "liba.so" && ln -s "liba.so.0.0.0"
"liba.so")
libtool: link: ( cd ".libs" && rm -f "liba.la" && ln -s "../liba.la" "liba.la" )
./runpath-in-lalib.at:53: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la
b.lo -rpath $libdir liba.la
stderr:
stdout:
libtool: link: gcc -shared .libs/b.o -Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/.libs -Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib
./.libs/liba.so -Wl,-soname -Wl,libb.so.0 -o .libs/libb.so.0.0.0
libtool: link: (cd ".libs" && rm -f "libb.so.0" && ln -s "libb.so.0.0.0"
"libb.so.0")
libtool: link: (cd ".libs" && rm -f "libb.so" && ln -s "libb.so.0.0.0"
"libb.so")
libtool: link: ( cd ".libs" && rm -f "libb.la" && ln -s "../libb.la" "libb.la" )
./runpath-in-lalib.at:55: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m
m.$OBJEXT libb.la
stderr:
stdout:
libtool: link: gcc -g -O2 -specs=specs.no-as-needed -o .libs/m m.o
./.libs/libb.so
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/.libs/liba.so
-Wl,-rpath -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib
./runpath-in-lalib.at:57: $LIBTOOL --mode=install cp liba.la $libdir/liba.la
stderr:
stdout:
libtool: install: cp .libs/liba.so.0.0.0
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib/liba.so.0.0.0
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib && { ln -s -f
liba.so.0.0.0 liba.so.0 || { rm -f liba.so.0 && ln -s liba.so.0.0.0 liba.so.0;
}; })
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib && { ln -s -f
liba.so.0.0.0 liba.so || { rm -f liba.so && ln -s liba.so.0.0.0 liba.so; }; })
libtool: install: cp .libs/liba.lai
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib/liba.la
libtool: finish:
PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
ldconfig -n /usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
./runpath-in-lalib.at:58: $LIBTOOL --mode=install cp libb.la $libdir/libb.la
stderr:
libtool: install: warning: relinking `libb.la'
stdout:
libtool: install: (cd /usr/packages/libtool/i686-hades/tests/testsuite.dir/24;
/bin/sh /usr/packages/libtool/i686-hades/libtool --mode=relink gcc -g -O2
-specs=specs.no-as-needed -o libb.la b.lo -rpath
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib liba.la )
libtool: relink: gcc -shared .libs/b.o -Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib
-L/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib -la
-Wl,-soname -Wl,libb.so.0 -o .libs/libb.so.0.0.0
libtool: install: cp .libs/libb.so.0.0.0T
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib/libb.so.0.0.0
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib && { ln -s -f
libb.so.0.0.0 libb.so.0 || { rm -f libb.so.0 && ln -s libb.so.0.0.0 libb.so.0;
}; })
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib && { ln -s -f
libb.so.0.0.0 libb.so || { rm -f libb.so && ln -s libb.so.0.0.0 libb.so; }; })
libtool: install: cp .libs/libb.lai
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib/libb.la
libtool: finish:
PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
ldconfig -n /usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
./runpath-in-lalib.at:59: $LIBTOOL --mode=install cp m $bindir/m
stderr:
stdout:
libtool: install: cp .libs/m
/usr/packages/libtool/i686-hades/tests/testsuite.dir/24/inst/bin/m
./runpath-in-lalib.at:61: grep /foobar $libdir/liba.la
stdout:
./runpath-in-lalib.at:61: exit code was 1, expected 0
24. runpath-in-lalib.at:25: 24. Runpath in libtool library files
(runpath-in-lalib.at:25): FAILED (runpath-in-lalib.at:61)
# -*- compilation -*-
25. static.at:68: testing ...
libtool: compile: gcc -g -O2 -c a.c -fPIC -DPIC -o .libs/a.o
libtool: link: gcc -shared .libs/a.o -Wl,-soname -Wl,liba1.so.0 -o
.libs/liba1.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba1.so.0" && ln -s "liba1.so.0.0.0"
"liba1.so.0")
libtool: link: (cd ".libs" && rm -f "liba1.so" && ln -s "liba1.so.0.0.0"
"liba1.so")
libtool: link: ( cd ".libs" && rm -f "liba1.la" && ln -s "../liba1.la"
"liba1.la" )
libtool: install: cp .libs/liba1.so.0.0.0
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba1.so.0.0.0
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba1.so.0.0.0 liba1.so.0 || { rm -f liba1.so.0 && ln -s liba1.so.0.0.0
liba1.so.0; }; })
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba1.so.0.0.0 liba1.so || { rm -f liba1.so && ln -s liba1.so.0.0.0
liba1.so; }; })
libtool: install: cp .libs/liba1.lai
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba1.la
libtool: finish:
PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
ldconfig -n /usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
libtool: link: gcc -shared .libs/a.o -Wl,-soname -Wl,liba1dep.so.0 -o
.libs/liba1dep.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba1dep.so.0" && ln -s
"liba1dep.so.0.0.0" "liba1dep.so.0")
libtool: link: (cd ".libs" && rm -f "liba1dep.so" && ln -s "liba1dep.so.0.0.0"
"liba1dep.so")
libtool: link: ( cd ".libs" && rm -f "liba1dep.la" && ln -s "../liba1dep.la"
"liba1dep.la" )
libtool: install: cp .libs/liba1dep.so.0.0.0
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba1dep.so.0.0.0
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba1dep.so.0.0.0 liba1dep.so.0 || { rm -f liba1dep.so.0 && ln -s
liba1dep.so.0.0.0 liba1dep.so.0; }; })
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba1dep.so.0.0.0 liba1dep.so || { rm -f liba1dep.so && ln -s
liba1dep.so.0.0.0 liba1dep.so; }; })
libtool: install: cp .libs/liba1dep.lai
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba1dep.la
libtool: finish:
PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
ldconfig -n /usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
libtool: link: gcc -shared .libs/a.o -Wl,-soname -Wl,liba2.so.0 -o
.libs/liba2.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba2.so.0" && ln -s "liba2.so.0.0.0"
"liba2.so.0")
libtool: link: (cd ".libs" && rm -f "liba2.so" && ln -s "liba2.so.0.0.0"
"liba2.so")
libtool: link: ( cd ".libs" && rm -f "liba2.la" && ln -s "../liba2.la"
"liba2.la" )
libtool: install: cp .libs/liba2.so.0.0.0
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba2.so.0.0.0
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba2.so.0.0.0 liba2.so.0 || { rm -f liba2.so.0 && ln -s liba2.so.0.0.0
liba2.so.0; }; })
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba2.so.0.0.0 liba2.so || { rm -f liba2.so && ln -s liba2.so.0.0.0
liba2.so; }; })
libtool: install: cp .libs/liba2.lai
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba2.la
libtool: finish:
PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
ldconfig -n /usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
libtool: link: gcc -shared .libs/a.o -Wl,-soname -Wl,liba2dep.so.0 -o
.libs/liba2dep.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba2dep.so.0" && ln -s
"liba2dep.so.0.0.0" "liba2dep.so.0")
libtool: link: (cd ".libs" && rm -f "liba2dep.so" && ln -s "liba2dep.so.0.0.0"
"liba2dep.so")
libtool: link: ( cd ".libs" && rm -f "liba2dep.la" && ln -s "../liba2dep.la"
"liba2dep.la" )
libtool: install: cp .libs/liba2dep.so.0.0.0
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba2dep.so.0.0.0
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba2dep.so.0.0.0 liba2dep.so.0 || { rm -f liba2dep.so.0 && ln -s
liba2dep.so.0.0.0 liba2dep.so.0; }; })
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba2dep.so.0.0.0 liba2dep.so || { rm -f liba2dep.so && ln -s
liba2dep.so.0.0.0 liba2dep.so; }; })
libtool: install: cp .libs/liba2dep.lai
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba2dep.la
libtool: finish:
PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
ldconfig -n /usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
libtool: link: gcc -shared .libs/a.o -Wl,-soname -Wl,liba3.so.0 -o
.libs/liba3.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba3.so.0" && ln -s "liba3.so.0.0.0"
"liba3.so.0")
libtool: link: (cd ".libs" && rm -f "liba3.so" && ln -s "liba3.so.0.0.0"
"liba3.so")
libtool: link: ( cd ".libs" && rm -f "liba3.la" && ln -s "../liba3.la"
"liba3.la" )
libtool: install: cp .libs/liba3.so.0.0.0
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba3.so.0.0.0
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba3.so.0.0.0 liba3.so.0 || { rm -f liba3.so.0 && ln -s liba3.so.0.0.0
liba3.so.0; }; })
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba3.so.0.0.0 liba3.so || { rm -f liba3.so && ln -s liba3.so.0.0.0
liba3.so; }; })
libtool: install: cp .libs/liba3.lai
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba3.la
libtool: finish:
PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
ldconfig -n /usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
libtool: link: gcc -shared .libs/a.o -Wl,-soname -Wl,liba3dep.so.0 -o
.libs/liba3dep.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba3dep.so.0" && ln -s
"liba3dep.so.0.0.0" "liba3dep.so.0")
libtool: link: (cd ".libs" && rm -f "liba3dep.so" && ln -s "liba3dep.so.0.0.0"
"liba3dep.so")
libtool: link: ( cd ".libs" && rm -f "liba3dep.la" && ln -s "../liba3dep.la"
"liba3dep.la" )
libtool: install: cp .libs/liba3dep.so.0.0.0
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba3dep.so.0.0.0
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba3dep.so.0.0.0 liba3dep.so.0 || { rm -f liba3dep.so.0 && ln -s
liba3dep.so.0.0.0 liba3dep.so.0; }; })
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib && { ln -s
-f liba3dep.so.0.0.0 liba3dep.so || { rm -f liba3dep.so && ln -s
liba3dep.so.0.0.0 liba3dep.so; }; })
libtool: install: cp .libs/liba3dep.lai
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib/liba3dep.la
libtool: finish:
PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
ldconfig -n /usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/broken/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
### libraries with dependencies: no
libtool: compile: gcc -g -O2 -c a1.c -fPIC -DPIC -o .libs/a1.o
libtool: link: gcc -shared .libs/a1.o -Wl,-soname -Wl,liba1.so.0 -o
.libs/liba1.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba1.so.0" && ln -s "liba1.so.0.0.0"
"liba1.so.0")
libtool: link: (cd ".libs" && rm -f "liba1.so" && ln -s "liba1.so.0.0.0"
"liba1.so")
libtool: link: ( cd ".libs" && rm -f "liba1.la" && ln -s "../liba1.la"
"liba1.la" )
libtool: compile: gcc -g -O2 -c a2.c -fPIC -DPIC -o .libs/a2.o
libtool: link: gcc -shared .libs/a2.o -Wl,-soname -Wl,liba2.so.0 -o
.libs/liba2.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba2.so.0" && ln -s "liba2.so.0.0.0"
"liba2.so.0")
libtool: link: (cd ".libs" && rm -f "liba2.so" && ln -s "liba2.so.0.0.0"
"liba2.so")
libtool: link: ( cd ".libs" && rm -f "liba2.la" && ln -s "../liba2.la"
"liba2.la" )
libtool: compile: gcc -g -O2 -c a3.c -fPIC -DPIC -o .libs/a3.o
libtool: link: gcc -shared .libs/a3.o -Wl,-soname -Wl,liba3.so.0 -o
.libs/liba3.so.0.0.0
libtool: link: (cd ".libs" && rm -f "liba3.so.0" && ln -s "liba3.so.0.0.0"
"liba3.so.0")
libtool: link: (cd ".libs" && rm -f "liba3.so" && ln -s "liba3.so.0.0.0"
"liba3.so")
libtool: link: ( cd ".libs" && rm -f "liba3.la" && ln -s "../liba3.la"
"liba3.la" )
libtool: install: cp a1/.libs/liba1.so.0.0.0
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib/liba1.so.0.0.0
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib && { ln -s -f
liba1.so.0.0.0 liba1.so.0 || { rm -f liba1.so.0 && ln -s liba1.so.0.0.0
liba1.so.0; }; })
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib && { ln -s -f
liba1.so.0.0.0 liba1.so || { rm -f liba1.so && ln -s liba1.so.0.0.0 liba1.so;
}; })
libtool: install: cp a1/.libs/liba1.lai
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib/liba1.la
libtool: finish:
PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
ldconfig -n /usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
libtool: install: cp a3/.libs/liba3.so.0.0.0
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib/liba3.so.0.0.0
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib && { ln -s -f
liba3.so.0.0.0 liba3.so.0 || { rm -f liba3.so.0 && ln -s liba3.so.0.0.0
liba3.so.0; }; })
libtool: install: (cd
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib && { ln -s -f
liba3.so.0.0.0 liba3.so || { rm -f liba3.so && ln -s liba3.so.0.0.0 liba3.so;
}; })
libtool: install: cp a3/.libs/liba3.lai
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib/liba3.la
libtool: finish:
PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
ldconfig -n /usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
libtool: clean: rm -f a1/liba1.la a1/.libs/liba1.so.0.0.0 a1/.libs/liba1.so.0
a1/.libs/liba1.so a1/.libs/liba1.la a1/.libs/liba1.lai
libtool: clean: rm -f a3/liba3.la a3/.libs/liba3.so.0.0.0 a3/.libs/liba3.so.0
a3/.libs/liba3.so a3/.libs/liba3.la a3/.libs/liba3.lai
libtool: clean: rmdir a1/.libs >/dev/null 2>&1
libtool: clean: rmdir a3/.libs >/dev/null 2>&1
./static.at:252: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o m$st
m.$OBJEXT \
-L$libdir1 -la1 a2/liba2.la -L$libdir3 -R$libdir3 -la3
stderr:
stdout:
libtool: link: gcc -g -O2 -specs=specs.no-as-needed -o m-static m.o
-L/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib/liba1.so
a2/.libs/liba2.so
-L/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib -la3
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/src/a2/.libs
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst2/lib
-Wl,-rpath -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib
./static.at:252: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o m$st
m.$OBJEXT \
-L$libdir1 -la1 a2/liba2.la -L$libdir3 -R$libdir3 -la3
stderr:
stdout:
libtool: link: gcc -g -O2 -specs=specs.no-as-needed -o m-static-libtool-libs
m.o -L/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib/liba1.so
a2/.libs/liba2.so
-L/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib -la3
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/src/a2/.libs
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst2/lib
-Wl,-rpath -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib
./static.at:252: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o m$st
m.$OBJEXT \
-L$libdir1 -la1 a2/liba2.la -L$libdir3 -R$libdir3 -la3
stderr:
/usr/bin/ld: attempted static link of dynamic object
`/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib/liba1.so'
collect2: ld returned 1 exit status
stdout:
libtool: link: gcc -static -g -O2 -specs=specs.no-as-needed -o m-all-static m.o
-L/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib/liba1.so
a2/.libs/liba2.so
-L/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib -la3
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/src/a2/.libs
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst1/lib
-Wl,-rpath
-Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst2/lib
-Wl,-rpath -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/25/inst3/lib
./static.at:252: exit code was 1, expected 0
25. static.at:68: 25. static linking flags for programs (static.at:68): FAILED
(static.at:252)
# -*- compilation -*-
64. cmdline_wrap.at:28: testing ...
./cmdline_wrap.at:43: $CONFIG_SHELL $abs_srcdir/testsuite -k libtool
$INNER_TESTSUITEFLAGS
stderr:
ERROR: All 28 tests were run,
5 failed (3 expected failures).
stdout:
## ----------------------- ##
## libtool 2.2 test suite. ##
## ----------------------- ##
Testing libtool functions.
11: duplicate members in archive tests ok
12: duplicate convenience archive names ok
13: preserve duplicate convenience deps expected failure
(duplicate_deps.at:72)
14: inherited_linker_flags ok
15: C convenience archives ok
16: C++ convenience archives ok
17: F77 convenience archives ok
18: FC convenience archives ok
19: Java convenience archives ok
20: Link order test. ok
21: Link order of deplibs. ok
22: Failure tests ok
23: shlibpath_overrides_runpath ok
24: Runpath in libtool library files FAILED
(runpath-in-lalib.at:61)
25: static linking flags for programs FAILED (static.at:252)
26: Export test ok
27: sys_lib_search_path ok
28: indirect convenience ok
29: indirect uninstalled ok
30: static library contains static library expected failure
(archive-in-archive.at:49)
DESTDIR tests
31: Simple DESTDIR install ok
32: DESTDIR with in-package deplibs ok
Libltdl functionality.
39: enforced lib prefix ok
C++ template tests.
54: simple template test ok
55: template test with subdirs ok
Constructors.
56: C++ static constructors ok
Detecting identical deplibs.
59: build tree relpaths expected failure
(deplibs-ident.at:68)
Libtool stress test.
63: Link option thorough search test ok
## ------------- ##
## Test results. ##
## ------------- ##
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `testsuite.log' and all information you think might help:
To: <address@hidden>
Subject: [libtool 2.2] testsuite: 24 25 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `testsuite.dir'.
./cmdline_wrap.at:43: exit code was 1, expected 0
testsuite.log:
> ## ----------------------- ##
> ## libtool 2.2 test suite. ##
> ## ----------------------- ##
>
> testsuite: command line was:
> $ /usr/packages/libtool/i686-hades/tests/testsuite -k libtool
> abs_top_srcdir=/usr/packages/libtool/i686-hades
> abs_builddir=/usr/packages/libtool/i686-hades/tests
>
> ## ---------------- ##
> ## Tested programs. ##
> ## ---------------- ##
>
> ## ------------------ ##
> ## Running the tests. ##
> ## ------------------ ##
> testsuite: starting at: Fri Mar 21 18:47:38 GMT 2008
> 11. duplicate members in archive tests (duplicate_members.at:26): ok
> (0m1.755s 0m0.890s)
> 12. duplicate convenience archive names (duplicate_conv.at:25): ok
> (0m3.067s 0m1.272s)
> 14. inherited_linker_flags (inherited_flags.at:26): ok (0m2.211s
> 0m1.121s)
> 15. C convenience archives (convenience.at:30): ok (0m3.273s 0m1.251s)
> 16. C++ convenience archives (convenience.at:69): ok (0m5.398s 0m1.576s)
> 17. F77 convenience archives (convenience.at:109): ok (0m3.461s 0m1.375s)
> 18. FC convenience archives (convenience.at:169): ok (0m4.052s 0m1.482s)
> 19. Java convenience archives (convenience.at:229): ok (0m11.308s
> 0m2.469s)
> 20. Link order test. (link-order.at:26): ok (0m4.315s 0m1.500s)
> 21. Link order of deplibs. (link-order2.at:46): ok (0m5.467s 0m1.929s)
> 22. Failure tests (fail.at:27): ok (0m1.011s 0m0.363s)
> 23. shlibpath_overrides_runpath (shlibpath.at:25): ok (0m1.894s 0m0.590s)
> 26. Export test (export.at:25): ok (0m5.447s 0m2.144s)
> 27. sys_lib_search_path (search-path.at:25): ok (0m0.553s 0m0.126s)
> 28. indirect convenience (indirect_deps.at:25): ok (0m2.670s 0m1.019s)
> 29. indirect uninstalled (indirect_deps.at:71): ok (0m3.142s 0m1.261s)
> 31. Simple DESTDIR install (destdir.at:48): ok (0m1.045s 0m0.450s)
> 32. DESTDIR with in-package deplibs (destdir.at:75): ok (0m3.823s
> 0m1.514s)
> 39. enforced lib prefix (need_lib_prefix.at:25): ok (0m1.817s 0m0.676s)
> 54. simple template test (template.at:27): ok (0m1.636s 0m0.537s)
> 55. template test with subdirs (template.at:126): ok (0m7.321s 0m2.221s)
> 56. C++ static constructors (ctor.at:27): ok (0m1.300s 0m0.406s)
> 63. Link option thorough search test (stresstest.at:31): ok (1m45.089s
> 0m43.267s)
> testsuite: ending at: Fri Mar 21 18:52:54 GMT 2008
> testsuite: test suite duration: 0h 5m 16s
>
> ## ------------- ##
> ## Test results. ##
> ## ------------- ##
>
> ERROR: All 28 tests were run,
> 5 failed (3 expected failures).
>
> ## ------------------------ ##
> ## Summary of the failures. ##
> ## ------------------------ ##
> Failed tests:
> libtool 2.2 test suite test groups:
>
> NUM: FILE-NAME:LINE TEST-GROUP-NAME
> KEYWORDS
>
> 24: runpath-in-lalib.at:25 Runpath in libtool library files
> libtool
> 25: static.at:68 static linking flags for programs
> libtool
>
> ## ---------------------- ##
> ## Detailed failed tests. ##
> ## ---------------------- ##
>
> # -*- compilation -*-
> 24. runpath-in-lalib.at:25: testing ...
> libtool: compile: gcc -g -O2 -c a.c -fPIC -DPIC -o .libs/a.o
> libtool: compile: gcc -g -O2 -c b.c -fPIC -DPIC -o .libs/b.o
> /runpath-in-lalib.at:51: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la
> a.lo -rpath $libdir -R$addrunpath
> stderr:
> stdout:
> libtool: link: gcc -shared .libs/liba.la.lnkscript -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/foobar
> -Wl,-soname -Wl,liba.so.0 -o .libs/liba.so.0.0.0
> libtool: link: rm -f .libs/liba.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "liba.so.0" && ln -s "liba.so.0.0.0"
> "liba.so.0")
> libtool: link: (cd ".libs" && rm -f "liba.so" && ln -s "liba.so.0.0.0"
> "liba.so")
> libtool: link: ( cd ".libs" && rm -f "liba.la" && ln -s "../liba.la"
> "liba.la" )
> /runpath-in-lalib.at:53: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la
> b.lo -rpath $libdir liba.la
> stderr:
> stdout:
> libtool: link: gcc -shared .libs/libb.la.lnkscript -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/.libs
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
> ./.libs/liba.so -Wl,-soname -Wl,libb.so.0 -o .libs/libb.so.0.0.0
> libtool: link: rm -f .libs/libb.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "libb.so.0" && ln -s "libb.so.0.0.0"
> "libb.so.0")
> libtool: link: (cd ".libs" && rm -f "libb.so" && ln -s "libb.so.0.0.0"
> "libb.so")
> libtool: link: ( cd ".libs" && rm -f "libb.la" && ln -s "../libb.la"
> "libb.la" )
> /runpath-in-lalib.at:55: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m
> m.$OBJEXT libb.la
> stderr:
> stdout:
> libtool: link: gcc -g -O2 -specs=specs.no-as-needed -o .libs/m m.o
> ./.libs/libb.so
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/.libs/liba.so
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
> /runpath-in-lalib.at:57: $LIBTOOL --mode=install cp liba.la $libdir/liba.la
> stderr:
> stdout:
> libtool: install: cp .libs/liba.so.0.0.0
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib/liba.so.0.0.0
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
> && { ln -s -f liba.so.0.0.0 liba.so.0 || { rm -f liba.so.0 && ln -s
> liba.so.0.0.0 liba.so.0; }; })
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
> && { ln -s -f liba.so.0.0.0 liba.so || { rm -f liba.so && ln -s
> liba.so.0.0.0 liba.so; }; })
> libtool: install: cp .libs/liba.lai
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib/liba.la
> libtool: finish:
> PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
> ldconfig -n
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> /runpath-in-lalib.at:58: $LIBTOOL --mode=install cp libb.la $libdir/libb.la
> stderr:
> libtool: install: warning: relinking `libb.la'
> stdout:
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24;
> /bin/sh /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/libtool
> --mode=relink gcc -g -O2 -specs=specs.no-as-needed -o libb.la b.lo -rpath
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
> liba.la )
> libtool: relink: gcc -shared .libs/libb.la.lnkscript -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
>
> -L/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
> -la -Wl,-soname -Wl,libb.so.0 -o .libs/libb.so.0.0.0
> libtool: relink: rm -f .libs/libb.la.lnkscript
> libtool: install: cp .libs/libb.so.0.0.0T
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib/libb.so.0.0.0
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
> && { ln -s -f libb.so.0.0.0 libb.so.0 || { rm -f libb.so.0 && ln -s
> libb.so.0.0.0 libb.so.0; }; })
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
> && { ln -s -f libb.so.0.0.0 libb.so || { rm -f libb.so && ln -s
> libb.so.0.0.0 libb.so; }; })
> libtool: install: cp .libs/libb.lai
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib/libb.la
> libtool: finish:
> PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
> ldconfig -n
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> /runpath-in-lalib.at:59: $LIBTOOL --mode=install cp m $bindir/m
> stderr:
> stdout:
> libtool: install: cp .libs/m
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/24/inst/bin/m
> /runpath-in-lalib.at:61: grep /foobar $libdir/liba.la
> stdout:
> /runpath-in-lalib.at:61: exit code was 1, expected 0
> 24. runpath-in-lalib.at:25: 24. Runpath in libtool library files
> (runpath-in-lalib.at:25): FAILED (runpath-in-lalib.at:61)
>
> # -*- compilation -*-
> 25. static.at:68: testing ...
> libtool: compile: gcc -g -O2 -c a.c -fPIC -DPIC -o .libs/a.o
> libtool: link: gcc -shared .libs/liba1.la.lnkscript -Wl,-soname
> -Wl,liba1.so.0 -o .libs/liba1.so.0.0.0
> libtool: link: rm -f .libs/liba1.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "liba1.so.0" && ln -s "liba1.so.0.0.0"
> "liba1.so.0")
> libtool: link: (cd ".libs" && rm -f "liba1.so" && ln -s "liba1.so.0.0.0"
> "liba1.so")
> libtool: link: ( cd ".libs" && rm -f "liba1.la" && ln -s "../liba1.la"
> "liba1.la" )
> libtool: install: cp .libs/liba1.so.0.0.0
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba1.so.0.0.0
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba1.so.0.0.0 liba1.so.0 || { rm -f liba1.so.0 && ln -s
> liba1.so.0.0.0 liba1.so.0; }; })
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba1.so.0.0.0 liba1.so || { rm -f liba1.so && ln -s
> liba1.so.0.0.0 liba1.so; }; })
> libtool: install: cp .libs/liba1.lai
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba1.la
> libtool: finish:
> PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
> ldconfig -n
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> libtool: link: gcc -shared .libs/liba1dep.la.lnkscript -Wl,-soname
> -Wl,liba1dep.so.0 -o .libs/liba1dep.so.0.0.0
> libtool: link: rm -f .libs/liba1dep.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "liba1dep.so.0" && ln -s
> "liba1dep.so.0.0.0" "liba1dep.so.0")
> libtool: link: (cd ".libs" && rm -f "liba1dep.so" && ln -s
> "liba1dep.so.0.0.0" "liba1dep.so")
> libtool: link: ( cd ".libs" && rm -f "liba1dep.la" && ln -s "../liba1dep.la"
> "liba1dep.la" )
> libtool: install: cp .libs/liba1dep.so.0.0.0
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba1dep.so.0.0.0
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba1dep.so.0.0.0 liba1dep.so.0 || { rm -f liba1dep.so.0 && ln
> -s liba1dep.so.0.0.0 liba1dep.so.0; }; })
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba1dep.so.0.0.0 liba1dep.so || { rm -f liba1dep.so && ln -s
> liba1dep.so.0.0.0 liba1dep.so; }; })
> libtool: install: cp .libs/liba1dep.lai
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba1dep.la
> libtool: finish:
> PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
> ldconfig -n
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> libtool: link: gcc -shared .libs/liba2.la.lnkscript -Wl,-soname
> -Wl,liba2.so.0 -o .libs/liba2.so.0.0.0
> libtool: link: rm -f .libs/liba2.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "liba2.so.0" && ln -s "liba2.so.0.0.0"
> "liba2.so.0")
> libtool: link: (cd ".libs" && rm -f "liba2.so" && ln -s "liba2.so.0.0.0"
> "liba2.so")
> libtool: link: ( cd ".libs" && rm -f "liba2.la" && ln -s "../liba2.la"
> "liba2.la" )
> libtool: install: cp .libs/liba2.so.0.0.0
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba2.so.0.0.0
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba2.so.0.0.0 liba2.so.0 || { rm -f liba2.so.0 && ln -s
> liba2.so.0.0.0 liba2.so.0; }; })
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba2.so.0.0.0 liba2.so || { rm -f liba2.so && ln -s
> liba2.so.0.0.0 liba2.so; }; })
> libtool: install: cp .libs/liba2.lai
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba2.la
> libtool: finish:
> PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
> ldconfig -n
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> libtool: link: gcc -shared .libs/liba2dep.la.lnkscript -Wl,-soname
> -Wl,liba2dep.so.0 -o .libs/liba2dep.so.0.0.0
> libtool: link: rm -f .libs/liba2dep.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "liba2dep.so.0" && ln -s
> "liba2dep.so.0.0.0" "liba2dep.so.0")
> libtool: link: (cd ".libs" && rm -f "liba2dep.so" && ln -s
> "liba2dep.so.0.0.0" "liba2dep.so")
> libtool: link: ( cd ".libs" && rm -f "liba2dep.la" && ln -s "../liba2dep.la"
> "liba2dep.la" )
> libtool: install: cp .libs/liba2dep.so.0.0.0
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba2dep.so.0.0.0
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba2dep.so.0.0.0 liba2dep.so.0 || { rm -f liba2dep.so.0 && ln
> -s liba2dep.so.0.0.0 liba2dep.so.0; }; })
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba2dep.so.0.0.0 liba2dep.so || { rm -f liba2dep.so && ln -s
> liba2dep.so.0.0.0 liba2dep.so; }; })
> libtool: install: cp .libs/liba2dep.lai
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba2dep.la
> libtool: finish:
> PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
> ldconfig -n
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> libtool: link: gcc -shared .libs/liba3.la.lnkscript -Wl,-soname
> -Wl,liba3.so.0 -o .libs/liba3.so.0.0.0
> libtool: link: rm -f .libs/liba3.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "liba3.so.0" && ln -s "liba3.so.0.0.0"
> "liba3.so.0")
> libtool: link: (cd ".libs" && rm -f "liba3.so" && ln -s "liba3.so.0.0.0"
> "liba3.so")
> libtool: link: ( cd ".libs" && rm -f "liba3.la" && ln -s "../liba3.la"
> "liba3.la" )
> libtool: install: cp .libs/liba3.so.0.0.0
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba3.so.0.0.0
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba3.so.0.0.0 liba3.so.0 || { rm -f liba3.so.0 && ln -s
> liba3.so.0.0.0 liba3.so.0; }; })
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba3.so.0.0.0 liba3.so || { rm -f liba3.so && ln -s
> liba3.so.0.0.0 liba3.so; }; })
> libtool: install: cp .libs/liba3.lai
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba3.la
> libtool: finish:
> PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
> ldconfig -n
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> libtool: link: gcc -shared .libs/liba3dep.la.lnkscript -Wl,-soname
> -Wl,liba3dep.so.0 -o .libs/liba3dep.so.0.0.0
> libtool: link: rm -f .libs/liba3dep.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "liba3dep.so.0" && ln -s
> "liba3dep.so.0.0.0" "liba3dep.so.0")
> libtool: link: (cd ".libs" && rm -f "liba3dep.so" && ln -s
> "liba3dep.so.0.0.0" "liba3dep.so")
> libtool: link: ( cd ".libs" && rm -f "liba3dep.la" && ln -s "../liba3dep.la"
> "liba3dep.la" )
> libtool: install: cp .libs/liba3dep.so.0.0.0
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba3dep.so.0.0.0
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba3dep.so.0.0.0 liba3dep.so.0 || { rm -f liba3dep.so.0 && ln
> -s liba3dep.so.0.0.0 liba3dep.so.0; }; })
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> && { ln -s -f liba3dep.so.0.0.0 liba3dep.so || { rm -f liba3dep.so && ln -s
> liba3dep.so.0.0.0 liba3dep.so; }; })
> libtool: install: cp .libs/liba3dep.lai
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib/liba3dep.la
> libtool: finish:
> PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
> ldconfig -n
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/broken/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
>
> ### libraries with dependencies: no
> libtool: compile: gcc -g -O2 -c a1.c -fPIC -DPIC -o .libs/a1.o
> libtool: link: gcc -shared .libs/liba1.la.lnkscript -Wl,-soname
> -Wl,liba1.so.0 -o .libs/liba1.so.0.0.0
> libtool: link: rm -f .libs/liba1.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "liba1.so.0" && ln -s "liba1.so.0.0.0"
> "liba1.so.0")
> libtool: link: (cd ".libs" && rm -f "liba1.so" && ln -s "liba1.so.0.0.0"
> "liba1.so")
> libtool: link: ( cd ".libs" && rm -f "liba1.la" && ln -s "../liba1.la"
> "liba1.la" )
> libtool: compile: gcc -g -O2 -c a2.c -fPIC -DPIC -o .libs/a2.o
> libtool: link: gcc -shared .libs/liba2.la.lnkscript -Wl,-soname
> -Wl,liba2.so.0 -o .libs/liba2.so.0.0.0
> libtool: link: rm -f .libs/liba2.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "liba2.so.0" && ln -s "liba2.so.0.0.0"
> "liba2.so.0")
> libtool: link: (cd ".libs" && rm -f "liba2.so" && ln -s "liba2.so.0.0.0"
> "liba2.so")
> libtool: link: ( cd ".libs" && rm -f "liba2.la" && ln -s "../liba2.la"
> "liba2.la" )
> libtool: compile: gcc -g -O2 -c a3.c -fPIC -DPIC -o .libs/a3.o
> libtool: link: gcc -shared .libs/liba3.la.lnkscript -Wl,-soname
> -Wl,liba3.so.0 -o .libs/liba3.so.0.0.0
> libtool: link: rm -f .libs/liba3.la.lnkscript
> libtool: link: (cd ".libs" && rm -f "liba3.so.0" && ln -s "liba3.so.0.0.0"
> "liba3.so.0")
> libtool: link: (cd ".libs" && rm -f "liba3.so" && ln -s "liba3.so.0.0.0"
> "liba3.so")
> libtool: link: ( cd ".libs" && rm -f "liba3.la" && ln -s "../liba3.la"
> "liba3.la" )
> libtool: install: cp a1/.libs/liba1.so.0.0.0
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib/liba1.so.0.0.0
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
> && { ln -s -f liba1.so.0.0.0 liba1.so.0 || { rm -f liba1.so.0 && ln -s
> liba1.so.0.0.0 liba1.so.0; }; })
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
> && { ln -s -f liba1.so.0.0.0 liba1.so || { rm -f liba1.so && ln -s
> liba1.so.0.0.0 liba1.so; }; })
> libtool: install: cp a1/.libs/liba1.lai
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib/liba1.la
> libtool: finish:
> PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
> ldconfig -n
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> libtool: install: cp a3/.libs/liba3.so.0.0.0
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib/liba3.so.0.0.0
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib
> && { ln -s -f liba3.so.0.0.0 liba3.so.0 || { rm -f liba3.so.0 && ln -s
> liba3.so.0.0.0 liba3.so.0; }; })
> libtool: install: (cd
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib
> && { ln -s -f liba3.so.0.0.0 liba3.so || { rm -f liba3.so && ln -s
> liba3.so.0.0.0 liba3.so; }; })
> libtool: install: cp a3/.libs/liba3.lai
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib/liba3.la
> libtool: finish:
> PATH="/usr/packages/libtool/i686-hades/tests:/home/compiler/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/games:/sbin"
> ldconfig -n
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib
> ----------------------------------------------------------------------
> Libraries have been installed in:
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> libtool: clean: rm -f a1/liba1.la a1/.libs/liba1.so.0.0.0 a1/.libs/liba1.so.0
> a1/.libs/liba1.so a1/.libs/liba1.la a1/.libs/liba1.lai
> libtool: clean: rm -f a3/liba3.la a3/.libs/liba3.so.0.0.0 a3/.libs/liba3.so.0
> a3/.libs/liba3.so a3/.libs/liba3.la a3/.libs/liba3.lai
> libtool: clean: rmdir a1/.libs >/dev/null 2>&1
> libtool: clean: rmdir a3/.libs >/dev/null 2>&1
> /static.at:252: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o m$st
> m.$OBJEXT \
> -L$libdir1 -la1 a2/liba2.la -L$libdir3 -R$libdir3 -la3
> stderr:
> stdout:
> libtool: link: gcc -g -O2 -specs=specs.no-as-needed -o m-static m.o
> -L/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib/liba1.so
> a2/.libs/liba2.so
> -L/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib
> -la3 -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/src/a2/.libs
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst2/lib
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib
> /static.at:252: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o m$st
> m.$OBJEXT \
> -L$libdir1 -la1 a2/liba2.la -L$libdir3 -R$libdir3 -la3
> stderr:
> stdout:
> libtool: link: gcc -g -O2 -specs=specs.no-as-needed -o m-static-libtool-libs
> m.o
> -L/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib/liba1.so
> a2/.libs/liba2.so
> -L/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib
> -la3 -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/src/a2/.libs
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst2/lib
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib
> /static.at:252: $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o m$st
> m.$OBJEXT \
> -L$libdir1 -la1 a2/liba2.la -L$libdir3 -R$libdir3 -la3
> stderr:
> /usr/bin/ld: attempted static link of dynamic object
> `/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib/liba1.so'
> collect2: ld returned 1 exit status
> stdout:
> libtool: link: gcc -static -g -O2 -specs=specs.no-as-needed -o m-all-static
> m.o
> -L/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
>
> /usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib/liba1.so
> a2/.libs/liba2.so
> -L/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib
> -la3 -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/src/a2/.libs
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst1/lib
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst2/lib
> -Wl,-rpath
> -Wl,/usr/packages/libtool/i686-hades/tests/testsuite.dir/64/tests/testsuite.dir/25/inst3/lib
> /static.at:252: exit code was 1, expected 0
> 25. static.at:68: 25. static linking flags for programs (static.at:68):
> FAILED (static.at:252)
>
>
64. cmdline_wrap.at:28: 64. Run tests with low max_cmd_len
(cmdline_wrap.at:28): FAILED (cmdline_wrap.at:43)
## ------------- ##
## ../config.log ##
## ------------- ##
| This file contains any messages produced by compilers while
| running configure, to aid debugging if configure makes a mistake.
|
| It was created by libtool configure 2.2, which was
| generated by GNU Autoconf 2.61a. Invocation command line was
|
| $ /usr/packages/libtool/i686-hades/configure --with-gnu-ld --enable-shared
--disable-static
|
| ## --------- ##
| ## Platform. ##
| ## --------- ##
|
| hostname = hades
| uname -m = i686
| uname -r = 2.6.24.3-dirty
| uname -s = Linux
| uname -v = #1 PREEMPT Wed Mar 19 23:18:15 GMT 2008
|
| /usr/bin/uname -p = unknown
| /bin/uname -X = unknown
|
| /bin/arch = i686
| /usr/bin/arch -k = unknown
| /usr/convex/getsysinfo = unknown
| /usr/bin/hostinfo = unknown
| /bin/machine = unknown
| /usr/bin/oslevel = unknown
| /bin/universe = unknown
|
| PATH: /home/compiler/bin
| PATH: /usr/bin
| PATH: /bin
| PATH: /usr/sbin
| PATH: /sbin
| PATH: /usr/games
|
|
| ## ----------- ##
| ## Core tests. ##
| ## ----------- ##
|
| configure:2171: checking for a BSD-compatible install
| configure:2227: result: /usr/bin/ginstall -c
| configure:2238: checking whether build environment is sane
| configure:2281: result: yes
| configure:2306: checking for a thread-safe mkdir -p
| configure:2345: result: /bin/mkdir -p
| configure:2358: checking for gawk
| configure:2374: found /usr/bin/gawk
| configure:2385: result: gawk
| configure:2396: checking whether make sets $(MAKE)
| configure:2418: result: yes
| configure:2613: checking whether subdir libobjs are useable
| configure:2624: result: yes
| configure:2716: checking for gcc
| configure:2732: found /usr/bin/gcc
| configure:2743: result: gcc
| configure:2981: checking for C compiler version
| configure:2989: gcc --version >&5
| gcc (GCC) 4.2.4 20080217 (prerelease)
| Copyright (C) 2007 Free Software Foundation, Inc.
| This is free software; see the source for copying conditions. There is NO
| warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
| configure:2993: $? = 0
| configure:3000: gcc -v >&5
| Reading specs from
/usr/packages.bin/gcc/4.2-080216/bin/../lib/gcc/i686-pc-linux-gnu/4.2.4/specs
| Target: i686-pc-linux-gnu
| Configured with: /usr/packages/gcc/4.2-080216/configure --with-gnu-ld
--with-gnu-as --with-system-zlib --disable-examples --enable-checking=release
--disable-libstdcxx-pch --enable-shared --disable-static --enable-threads
--enable-__cxa_atexit --enable-libada --enable-libssp --enable-plugin
--enable-gconf-peer --enable-java-awt=xlib,gtk --enable-xmlj
--enable-tool-wrappers --enable-objc-gc --prefix=/usr --build=i686-pc-linux-gnu
--host=i686-pc-linux-gnu
| Thread model: posix
| gcc version 4.2.4 20080217 (prerelease)
| configure:3004: $? = 0
| configure:3011: gcc -V >&5
| gcc: '-V' option must have argument
| configure:3015: $? = 1
| configure:3038: checking for C compiler default output file name
| configure:3065: gcc conftest.c >&5
| configure:3069: $? = 0
| configure:3107: result: a.out
| configure:3124: checking whether the C compiler works
| configure:3134: ./a.out
| configure:3138: $? = 0
| configure:3155: result: yes
| configure:3162: checking whether we are cross compiling
| configure:3164: result: no
| configure:3167: checking for suffix of executables
| configure:3174: gcc -o conftest conftest.c >&5
| configure:3178: $? = 0
| configure:3202: result:
| configure:3208: checking for suffix of object files
| configure:3234: gcc -c conftest.c >&5
| configure:3238: $? = 0
| configure:3261: result: o
| configure:3265: checking whether we are using the GNU C compiler
| configure:3294: gcc -c conftest.c >&5
| configure:3301: $? = 0
| configure:3318: result: yes
| configure:3327: checking whether gcc accepts -g
| configure:3357: gcc -c -g conftest.c >&5
| configure:3364: $? = 0
| configure:3465: result: yes
| configure:3482: checking for gcc option to accept ISO C89
| configure:3556: gcc -c -g -O2 conftest.c >&5
| configure:3563: $? = 0
| configure:3586: result: none needed
| configure:3615: checking for style of include used by make
| configure:3643: result: GNU
| configure:3668: checking dependency style of gcc
| configure:3759: result: gcc3
| configure:3775: checking whether gcc and cc understand -c and -o together
| configure:3810: gcc -c conftest.c -o conftest2.o >&5
| configure:3814: $? = 0
| configure:3820: gcc -c conftest.c -o conftest2.o >&5
| configure:3824: $? = 0
| configure:3835: cc -c conftest.c >&5
| configure:3839: $? = 0
| configure:3847: cc -c conftest.c -o conftest2.o >&5
| configure:3851: $? = 0
| configure:3857: cc -c conftest.c -o conftest2.o >&5
| configure:3861: $? = 0
| configure:3879: result: yes
| configure:3910: checking how to run the C preprocessor
| configure:3950: gcc -E conftest.c
| configure:3957: $? = 0
| configure:3988: gcc -E conftest.c
| conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
| configure:3995: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | /* end confdefs.h. */
| | #include <ac_nonexistent.h>
| configure:4028: result: gcc -E
| configure:4057: gcc -E conftest.c
| configure:4064: $? = 0
| configure:4095: gcc -E conftest.c
| conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
| configure:4102: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | /* end confdefs.h. */
| | #include <ac_nonexistent.h>
| configure:4174: checking build system type
| configure:4192: result: i686-pc-linux-gnu
| configure:4214: checking host system type
| configure:4229: result: i686-pc-linux-gnu
| configure:4251: checking for a sed that does not truncate output
| configure:4330: result: /usr/bin/sed
| configure:4348: checking for grep that handles long lines and -e
| configure:4422: result: /usr/bin/grep
| configure:4427: checking for egrep
| configure:4505: result: /usr/bin/grep -E
| configure:4510: checking for fgrep
| configure:4588: result: /usr/bin/grep -F
| configure:4623: checking for ld used by gcc
| configure:4690: result: /usr/bin/ld
| configure:4699: checking if the linker (/usr/bin/ld) is GNU ld
| configure:4714: result: yes
| configure:4727: checking for BSD- or MS-compatible name lister (nm)
| configure:4776: result: /usr/bin/nm -B
| configure:4898: checking the name lister (/usr/bin/nm -B) interface
| configure:4905: gcc -c -g -O2 conftest.c >&5
| configure:4908: /usr/bin/nm -B "conftest.o"
| configure:4911: output
| 00000000 B some_variable
| configure:4918: result: BSD nm
| configure:4921: checking whether ln -s works
| configure:4925: result: yes
| configure:4933: checking the maximum length of command line arguments
| configure:5053: result: 98304
| configure:5071: checking whether the shell understands some XSI constructs
| configure:5079: result: yes
| configure:5083: checking whether the shell understands "+="
| configure:5089: result: yes
| configure:5124: checking for /usr/bin/ld option to reload object files
| configure:5131: result: -r
| configure:5158: checking how to recognize dependent libraries
| configure:5348: result: pass_all
| configure:5408: checking for ar
| configure:5424: found /usr/bin/ar
| configure:5435: result: ar
| configure:5517: checking for strip
| configure:5533: found /usr/bin/strip
| configure:5544: result: strip
| configure:5620: checking for ranlib
| configure:5636: found /usr/bin/ranlib
| configure:5647: result: ranlib
| configure:5741: checking command to parse /usr/bin/nm -B output from gcc
object
| configure:5859: gcc -c -g -O2 conftest.c >&5
| configure:5862: $? = 0
| configure:5866: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][
]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
| configure:5869: $? = 0
| configure:5923: gcc -o conftest -g -O2 conftest.c conftstm.o >&5
| configure:5926: $? = 0
| configure:5964: result: ok
| configure:6532: checking for ANSI C header files
| configure:6562: gcc -c -g -O2 conftest.c >&5
| configure:6569: $? = 0
| configure:6668: gcc -o conftest -g -O2 conftest.c >&5
| configure:6672: $? = 0
| configure:6678: ./conftest
| configure:6682: $? = 0
| configure:6699: result: yes
| configure:6723: checking for sys/types.h
| configure:6744: gcc -c -g -O2 conftest.c >&5
| configure:6751: $? = 0
| configure:6768: result: yes
| configure:6723: checking for sys/stat.h
| configure:6744: gcc -c -g -O2 conftest.c >&5
| configure:6751: $? = 0
| configure:6768: result: yes
| configure:6723: checking for stdlib.h
| configure:6744: gcc -c -g -O2 conftest.c >&5
| configure:6751: $? = 0
| configure:6768: result: yes
| configure:6723: checking for string.h
| configure:6744: gcc -c -g -O2 conftest.c >&5
| configure:6751: $? = 0
| configure:6768: result: yes
| configure:6723: checking for memory.h
| configure:6744: gcc -c -g -O2 conftest.c >&5
| configure:6751: $? = 0
| configure:6768: result: yes
| configure:6723: checking for strings.h
| configure:6744: gcc -c -g -O2 conftest.c >&5
| configure:6751: $? = 0
| configure:6768: result: yes
| configure:6723: checking for inttypes.h
| configure:6744: gcc -c -g -O2 conftest.c >&5
| configure:6751: $? = 0
| configure:6768: result: yes
| configure:6723: checking for stdint.h
| configure:6744: gcc -c -g -O2 conftest.c >&5
| configure:6751: $? = 0
| configure:6768: result: yes
| configure:6723: checking for unistd.h
| configure:6744: gcc -c -g -O2 conftest.c >&5
| configure:6751: $? = 0
| configure:6768: result: yes
| configure:6785: checking for dlfcn.h
| configure:6806: gcc -c -g -O2 conftest.c >&5
| configure:6813: $? = 0
| configure:6830: result: yes
| configure:7324: checking for objdir
| configure:7339: result: .libs
| configure:7635: checking if gcc supports -fno-rtti -fno-exceptions
| configure:7653: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5
| cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not
for C
| configure:7657: $? = 0
| configure:7670: result: no
| configure:7690: checking for gcc option to produce PIC
| configure:7941: result: -fPIC -DPIC
| configure:7953: checking if gcc PIC flag -fPIC -DPIC works
| configure:7971: gcc -c -g -O2 -fPIC -DPIC -DPIC conftest.c >&5
| configure:7975: $? = 0
| configure:7988: result: yes
| configure:8012: checking if gcc static flag -static works
| configure:8040: result: yes
| configure:8055: checking if gcc supports -c -o file.o
| configure:8076: gcc -c -g -O2 -o out/conftest2.o conftest.c >&5
| configure:8080: $? = 0
| configure:8102: result: yes
| configure:8110: checking if gcc supports -c -o file.o
| configure:8157: result: yes
| configure:8190: checking whether the gcc linker (/usr/bin/ld) supports shared
libraries
| configure:9243: result: yes
| configure:9280: checking whether -lc should be explicitly linked in
| configure:9285: gcc -c -g -O2 conftest.c >&5
| configure:9288: $? = 0
| configure:9303: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o
conftest 2\>\&1 \| /usr/bin/grep -lc \>/dev/null 2\>\&1
| configure:9306: $? = 0
| configure:9318: result: no
| configure:9482: checking dynamic linker characteristics
| configure:9920: gcc -o conftest -g -O2 -Wl,-rpath -Wl,/foo conftest.c >&5
| configure:9927: $? = 0
| configure:10157: result: GNU/Linux ld.so
| configure:10259: checking how to hardcode library paths into programs
| configure:10284: result: immediate
| configure:10404: checking for shl_load
| configure:10460: gcc -o conftest -g -O2 conftest.c >&5
| /tmp/ccGSjfmj.o: In function `main':
| /usr/packages/libtool/i686-hades/conftest.c:56: undefined reference to
`shl_load'
| collect2: ld returned 1 exit status
| configure:10467: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | /* end confdefs.h. */
| | /* Define shl_load to an innocuous variant, in case <limits.h> declares
shl_load.
| | For example, HP-UX 11i <limits.h> declares gettimeofday. */
| | #define shl_load innocuous_shl_load
| |
| | /* System header to define __stub macros and hopefully few prototypes,
| | which can conflict with char shl_load (); below.
| | Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| | <limits.h> exists even on freestanding compilers. */
| |
| | #ifdef __STDC__
| | # include <limits.h>
| | #else
| | # include <assert.h>
| | #endif
| |
| | #undef shl_load
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char shl_load ();
| | /* The GNU C library defines this for functions which it implements
| | to always fail with ENOSYS. Some functions are actually named
| | something starting with __ and the normal name is an alias. */
| | #if defined __stub_shl_load || defined __stub___shl_load
| | choke me
| | #endif
| |
| | int
| | main ()
| | {
| | return shl_load ();
| | ;
| | return 0;
| | }
| configure:10484: result: no
| configure:10489: checking for shl_load in -ldld
| configure:10524: gcc -o conftest -g -O2 conftest.c -ldld >&5
| /usr/bin/ld: cannot find -ldld
| collect2: ld returned 1 exit status
| configure:10531: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | /* end confdefs.h. */
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char shl_load ();
| | int
| | main ()
| | {
| | return shl_load ();
| | ;
| | return 0;
| | }
| configure:10549: result: no
| configure:10554: checking for dlopen
| configure:10610: gcc -o conftest -g -O2 conftest.c >&5
| /tmp/ccmexNw7.o: In function `main':
| /usr/packages/libtool/i686-hades/conftest.c:56: undefined reference to
`dlopen'
| collect2: ld returned 1 exit status
| configure:10617: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | /* end confdefs.h. */
| | /* Define dlopen to an innocuous variant, in case <limits.h> declares
dlopen.
| | For example, HP-UX 11i <limits.h> declares gettimeofday. */
| | #define dlopen innocuous_dlopen
| |
| | /* System header to define __stub macros and hopefully few prototypes,
| | which can conflict with char dlopen (); below.
| | Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| | <limits.h> exists even on freestanding compilers. */
| |
| | #ifdef __STDC__
| | # include <limits.h>
| | #else
| | # include <assert.h>
| | #endif
| |
| | #undef dlopen
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char dlopen ();
| | /* The GNU C library defines this for functions which it implements
| | to always fail with ENOSYS. Some functions are actually named
| | something starting with __ and the normal name is an alias. */
| | #if defined __stub_dlopen || defined __stub___dlopen
| | choke me
| | #endif
| |
| | int
| | main ()
| | {
| | return dlopen ();
| | ;
| | return 0;
| | }
| configure:10634: result: no
| configure:10639: checking for dlopen in -ldl
| configure:10674: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:10681: $? = 0
| configure:10699: result: yes
| configure:10870: checking whether a program can dlopen itself
| configure:10944: gcc -o conftest -g -O2 -DHAVE_DLFCN_H -Wl,--export-dynamic
conftest.c -ldl >&5
| configure: In function 'main':
| configure:10940: warning: incompatible implicit declaration of built-in
function 'exit'
| configure:10947: $? = 0
| configure:10965: result: yes
| configure:10970: checking whether a statically linked program can dlopen
itself
| configure:11044: gcc -o conftest -g -O2 -DHAVE_DLFCN_H -Wl,--export-dynamic
-static conftest.c -ldl >&5
| configure: In function 'main':
| configure:11040: warning: incompatible implicit declaration of built-in
function 'exit'
| /tmp/ccI443op.o: In function `main':
| /usr/packages/libtool/i686-hades/configure:11028: warning: Using 'dlopen' in
statically linked applications requires at runtime the shared libraries from
the glibc version used for linking
| configure:11047: $? = 0
| /lib/: cannot read file data: Is a directory
| configure:11065: result: no
| configure:11104: checking whether stripping libraries is possible
| configure:11109: result: yes
| configure:11144: checking if libtool supports shared libraries
| configure:11146: result: yes
| configure:11149: checking whether to build shared libraries
| configure:11170: result: yes
| configure:11173: checking whether to build static libraries
| configure:11177: result: no
| configure:11213: checking which extension is used for runtime loadable modules
| configure:11223: result: .so
| configure:11233: checking which variable specifies run-time module search path
| configure:11240: result: LD_LIBRARY_PATH
| configure:11250: checking for the default library search path
| configure:11257: result: /lib /usr/lib /usr/lib/mysql /usr/lib/octave-3.0.0
/usr/local/lib /usr/lib/firefox /usr/lib/htdig
/usr/lib/gnustep/System/Library/Libraries
| configure:11287: checking for library containing dlopen
| configure:11328: gcc -o conftest -g -O2 conftest.c >&5
| /tmp/cc2UM499.o: In function `main':
| /usr/packages/libtool/i686-hades/conftest.c:36: undefined reference to
`dlopen'
| collect2: ld returned 1 exit status
| configure:11335: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| | /* end confdefs.h. */
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char dlopen ();
| | int
| | main ()
| | {
| | return dlopen ();
| | ;
| | return 0;
| | }
| configure:11328: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:11335: $? = 0
| configure:11363: result: -ldl
| configure:11513: checking for dlerror
| configure:11569: gcc -o conftest -g -O2 conftest.c -ldl -ldl >&5
| configure:11576: $? = 0
| configure:11595: result: yes
| configure:11611: checking for shl_load
| configure:11691: result: no
| configure:11701: checking for shl_load in -ldld
| configure:11761: result: no
| configure:11880: checking for dld_link in -ldld
| configure:11915: gcc -o conftest -g -O2 conftest.c -ldld -ldl >&5
| /usr/bin/ld: cannot find -ldld
| collect2: ld returned 1 exit status
| configure:11922: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | /* end confdefs.h. */
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char dld_link ();
| | int
| | main ()
| | {
| | return dld_link ();
| | ;
| | return 0;
| | }
| configure:11940: result: no
| configure:11978: checking for _ prefix in compiled symbols
| configure:11988: gcc -c -g -O2 conftest.c >&5
| configure:11991: $? = 0
| configure:11995: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][
]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
| configure:11998: $? = 0
| configure:12020: result: no
| configure:12140: checking whether deplibs are loaded by dlopen
| configure:12227: result: yes
| configure:12243: checking for argz.h
| configure:12264: gcc -c -g -O2 conftest.c >&5
| configure:12271: $? = 0
| configure:12288: result: yes
| configure:12301: checking for error_t
| configure:12334: gcc -c -g -O2 conftest.c >&5
| configure:12341: $? = 0
| configure:12356: result: yes
| configure:12391: checking for argz_add
| configure:12447: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12454: $? = 0
| configure:12473: result: yes
| configure:12391: checking for argz_append
| configure:12447: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12454: $? = 0
| configure:12473: result: yes
| configure:12391: checking for argz_count
| configure:12447: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12454: $? = 0
| configure:12473: result: yes
| configure:12391: checking for argz_create_sep
| configure:12447: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12454: $? = 0
| configure:12473: result: yes
| configure:12391: checking for argz_insert
| configure:12447: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12454: $? = 0
| configure:12473: result: yes
| configure:12391: checking for argz_next
| configure:12447: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12454: $? = 0
| configure:12473: result: yes
| configure:12391: checking for argz_stringify
| configure:12447: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12454: $? = 0
| configure:12473: result: yes
| configure:12493: checking if argz actually works
| configure:12524: result: yes
| configure:12547: checking whether libtool supports -dlopen/-dlpreopen
| configure:12559: result: yes
| configure:12630: checking for unistd.h
| configure:12675: result: yes
| configure:12630: checking for dl.h
| configure:12651: gcc -c -g -O2 conftest.c >&5
| conftest.c:75:16: error: dl.h: No such file or directory
| configure:12658: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define LTDL_DLOPEN_SELF_WORKS 1
| | #define HAVE_UNISTD_H 1
| | /* end confdefs.h. */
| | #include <stdio.h>
| | #ifdef HAVE_SYS_TYPES_H
| | # include <sys/types.h>
| | #endif
| | #ifdef HAVE_SYS_STAT_H
| | # include <sys/stat.h>
| | #endif
| | #ifdef STDC_HEADERS
| | # include <stdlib.h>
| | # include <stddef.h>
| | #else
| | # ifdef HAVE_STDLIB_H
| | # include <stdlib.h>
| | # endif
| | #endif
| | #ifdef HAVE_STRING_H
| | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| | # include <memory.h>
| | # endif
| | # include <string.h>
| | #endif
| | #ifdef HAVE_STRINGS_H
| | # include <strings.h>
| | #endif
| | #ifdef HAVE_INTTYPES_H
| | # include <inttypes.h>
| | #endif
| | #ifdef HAVE_STDINT_H
| | # include <stdint.h>
| | #endif
| | #ifdef HAVE_UNISTD_H
| | # include <unistd.h>
| | #endif
| |
| | #include <dl.h>
| configure:12675: result: no
| configure:12630: checking for sys/dl.h
| configure:12651: gcc -c -g -O2 conftest.c >&5
| conftest.c:75:20: error: sys/dl.h: No such file or directory
| configure:12658: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define LTDL_DLOPEN_SELF_WORKS 1
| | #define HAVE_UNISTD_H 1
| | /* end confdefs.h. */
| | #include <stdio.h>
| | #ifdef HAVE_SYS_TYPES_H
| | # include <sys/types.h>
| | #endif
| | #ifdef HAVE_SYS_STAT_H
| | # include <sys/stat.h>
| | #endif
| | #ifdef STDC_HEADERS
| | # include <stdlib.h>
| | # include <stddef.h>
| | #else
| | # ifdef HAVE_STDLIB_H
| | # include <stdlib.h>
| | # endif
| | #endif
| | #ifdef HAVE_STRING_H
| | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| | # include <memory.h>
| | # endif
| | # include <string.h>
| | #endif
| | #ifdef HAVE_STRINGS_H
| | # include <strings.h>
| | #endif
| | #ifdef HAVE_INTTYPES_H
| | # include <inttypes.h>
| | #endif
| | #ifdef HAVE_STDINT_H
| | # include <stdint.h>
| | #endif
| | #ifdef HAVE_UNISTD_H
| | # include <unistd.h>
| | #endif
| |
| | #include <sys/dl.h>
| configure:12675: result: no
| configure:12630: checking for dld.h
| configure:12651: gcc -c -g -O2 conftest.c >&5
| conftest.c:75:17: error: dld.h: No such file or directory
| configure:12658: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define LTDL_DLOPEN_SELF_WORKS 1
| | #define HAVE_UNISTD_H 1
| | /* end confdefs.h. */
| | #include <stdio.h>
| | #ifdef HAVE_SYS_TYPES_H
| | # include <sys/types.h>
| | #endif
| | #ifdef HAVE_SYS_STAT_H
| | # include <sys/stat.h>
| | #endif
| | #ifdef STDC_HEADERS
| | # include <stdlib.h>
| | # include <stddef.h>
| | #else
| | # ifdef HAVE_STDLIB_H
| | # include <stdlib.h>
| | # endif
| | #endif
| | #ifdef HAVE_STRING_H
| | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| | # include <memory.h>
| | # endif
| | # include <string.h>
| | #endif
| | #ifdef HAVE_STRINGS_H
| | # include <strings.h>
| | #endif
| | #ifdef HAVE_INTTYPES_H
| | # include <inttypes.h>
| | #endif
| | #ifdef HAVE_STDINT_H
| | # include <stdint.h>
| | #endif
| | #ifdef HAVE_UNISTD_H
| | # include <unistd.h>
| | #endif
| |
| | #include <dld.h>
| configure:12675: result: no
| configure:12630: checking for mach-o/dyld.h
| configure:12651: gcc -c -g -O2 conftest.c >&5
| conftest.c:75:25: error: mach-o/dyld.h: No such file or directory
| configure:12658: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define LTDL_DLOPEN_SELF_WORKS 1
| | #define HAVE_UNISTD_H 1
| | /* end confdefs.h. */
| | #include <stdio.h>
| | #ifdef HAVE_SYS_TYPES_H
| | # include <sys/types.h>
| | #endif
| | #ifdef HAVE_SYS_STAT_H
| | # include <sys/stat.h>
| | #endif
| | #ifdef STDC_HEADERS
| | # include <stdlib.h>
| | # include <stddef.h>
| | #else
| | # ifdef HAVE_STDLIB_H
| | # include <stdlib.h>
| | # endif
| | #endif
| | #ifdef HAVE_STRING_H
| | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| | # include <memory.h>
| | # endif
| | # include <string.h>
| | #endif
| | #ifdef HAVE_STRINGS_H
| | # include <strings.h>
| | #endif
| | #ifdef HAVE_INTTYPES_H
| | # include <inttypes.h>
| | #endif
| | #ifdef HAVE_STDINT_H
| | # include <stdint.h>
| | #endif
| | #ifdef HAVE_UNISTD_H
| | # include <unistd.h>
| | #endif
| |
| | #include <mach-o/dyld.h>
| configure:12675: result: no
| configure:12630: checking for dirent.h
| configure:12651: gcc -c -g -O2 conftest.c >&5
| configure:12658: $? = 0
| configure:12675: result: yes
| configure:12694: checking for closedir
| configure:12750: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12757: $? = 0
| configure:12776: result: yes
| configure:12694: checking for opendir
| configure:12750: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12757: $? = 0
| configure:12776: result: yes
| configure:12694: checking for readdir
| configure:12750: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12757: $? = 0
| configure:12776: result: yes
| configure:12799: checking for strlcat
| configure:12855: gcc -o conftest -g -O2 conftest.c -ldl >&5
| /tmp/ccmAyLef.o: In function `main':
| /usr/packages/libtool/i686-hades/conftest.c:79: undefined reference to
`strlcat'
| collect2: ld returned 1 exit status
| configure:12862: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define LTDL_DLOPEN_SELF_WORKS 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DIRENT_H 1
| | #define HAVE_CLOSEDIR 1
| | #define HAVE_OPENDIR 1
| | #define HAVE_READDIR 1
| | /* end confdefs.h. */
| | /* Define strlcat to an innocuous variant, in case <limits.h> declares
strlcat.
| | For example, HP-UX 11i <limits.h> declares gettimeofday. */
| | #define strlcat innocuous_strlcat
| |
| | /* System header to define __stub macros and hopefully few prototypes,
| | which can conflict with char strlcat (); below.
| | Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| | <limits.h> exists even on freestanding compilers. */
| |
| | #ifdef __STDC__
| | # include <limits.h>
| | #else
| | # include <assert.h>
| | #endif
| |
| | #undef strlcat
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char strlcat ();
| | /* The GNU C library defines this for functions which it implements
| | to always fail with ENOSYS. Some functions are actually named
| | something starting with __ and the normal name is an alias. */
| | #if defined __stub_strlcat || defined __stub___strlcat
| | choke me
| | #endif
| |
| | int
| | main ()
| | {
| | return strlcat ();
| | ;
| | return 0;
| | }
| configure:12881: result: no
| configure:12799: checking for strlcpy
| configure:12855: gcc -o conftest -g -O2 conftest.c -ldl >&5
| /tmp/ccS7cqIM.o: In function `main':
| /usr/packages/libtool/i686-hades/conftest.c:79: undefined reference to
`strlcpy'
| collect2: ld returned 1 exit status
| configure:12862: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define LTDL_DLOPEN_SELF_WORKS 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DIRENT_H 1
| | #define HAVE_CLOSEDIR 1
| | #define HAVE_OPENDIR 1
| | #define HAVE_READDIR 1
| | /* end confdefs.h. */
| | /* Define strlcpy to an innocuous variant, in case <limits.h> declares
strlcpy.
| | For example, HP-UX 11i <limits.h> declares gettimeofday. */
| | #define strlcpy innocuous_strlcpy
| |
| | /* System header to define __stub macros and hopefully few prototypes,
| | which can conflict with char strlcpy (); below.
| | Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| | <limits.h> exists even on freestanding compilers. */
| |
| | #ifdef __STDC__
| | # include <limits.h>
| | #else
| | # include <assert.h>
| | #endif
| |
| | #undef strlcpy
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char strlcpy ();
| | /* The GNU C library defines this for functions which it implements
| | to always fail with ENOSYS. Some functions are actually named
| | something starting with __ and the normal name is an alias. */
| | #if defined __stub_strlcpy || defined __stub___strlcpy
| | choke me
| | #endif
| |
| | int
| | main ()
| | {
| | return strlcpy ();
| | ;
| | return 0;
| | }
| configure:12881: result: no
| configure:12966: checking for g++
| configure:12982: found /usr/bin/g++
| configure:12993: result: g++
| configure:13024: checking for C++ compiler version
| configure:13032: g++ --version >&5
| g++ (GCC) 4.2.4 20080217 (prerelease)
| Copyright (C) 2007 Free Software Foundation, Inc.
| This is free software; see the source for copying conditions. There is NO
| warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
| configure:13036: $? = 0
| configure:13043: g++ -v >&5
| Reading specs from
/usr/packages.bin/gcc/4.2-080216/bin/../lib/gcc/i686-pc-linux-gnu/4.2.4/specs
| Target: i686-pc-linux-gnu
| Configured with: /usr/packages/gcc/4.2-080216/configure --with-gnu-ld
--with-gnu-as --with-system-zlib --disable-examples --enable-checking=release
--disable-libstdcxx-pch --enable-shared --disable-static --enable-threads
--enable-__cxa_atexit --enable-libada --enable-libssp --enable-plugin
--enable-gconf-peer --enable-java-awt=xlib,gtk --enable-xmlj
--enable-tool-wrappers --enable-objc-gc --prefix=/usr --build=i686-pc-linux-gnu
--host=i686-pc-linux-gnu
| Thread model: posix
| gcc version 4.2.4 20080217 (prerelease)
| configure:13047: $? = 0
| configure:13054: g++ -V >&5
| g++: '-V' option must have argument
| configure:13058: $? = 1
| configure:13061: checking whether we are using the GNU C++ compiler
| configure:13090: g++ -c conftest.cpp >&5
| configure:13097: $? = 0
| configure:13114: result: yes
| configure:13123: checking whether g++ accepts -g
| configure:13153: g++ -c -g conftest.cpp >&5
| configure:13160: $? = 0
| configure:13261: result: yes
| configure:13286: checking dependency style of g++
| configure:13377: result: gcc3
| configure:13400: checking how to run the C++ preprocessor
| configure:13436: g++ -E conftest.cpp
| configure:13443: $? = 0
| configure:13474: g++ -E conftest.cpp
| conftest.cpp:45:28: error: ac_nonexistent.h: No such file or directory
| configure:13481: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define LTDL_DLOPEN_SELF_WORKS 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DIRENT_H 1
| | #define HAVE_CLOSEDIR 1
| | #define HAVE_OPENDIR 1
| | #define HAVE_READDIR 1
| | /* end confdefs.h. */
| | #include <ac_nonexistent.h>
| configure:13514: result: g++ -E
| configure:13543: g++ -E conftest.cpp
| configure:13550: $? = 0
| configure:13581: g++ -E conftest.cpp
| conftest.cpp:45:28: error: ac_nonexistent.h: No such file or directory
| configure:13588: $? = 1
| configure: failed program was:
| | /* confdefs.h. */
| | #define PACKAGE_NAME "libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.2"
| | #define PACKAGE_STRING "libtool 2.2"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE "libtool"
| | #define VERSION "2.2"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define LTDL_DLOPEN_SELF_WORKS 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DIRENT_H 1
| | #define HAVE_CLOSEDIR 1
| | #define HAVE_OPENDIR 1
| | #define HAVE_READDIR 1
| | /* end confdefs.h. */
| | #include <ac_nonexistent.h>
| configure:13762: checking for ld used by g++
| configure:13829: result: /usr/bin/ld
| configure:13838: checking if the linker (/usr/bin/ld) is GNU ld
| configure:13853: result: yes
| configure:13908: checking whether the g++ linker (/usr/bin/ld) supports
shared libraries
| configure:14872: result: yes
| configure:14900: g++ -c -g -O2 conftest.cpp >&5
| configure:14903: $? = 0
| configure:15085: checking for g++ option to produce PIC
| configure:15386: result: -fPIC -DPIC
| configure:15395: checking if g++ PIC flag -fPIC -DPIC works
| configure:15413: g++ -c -g -O2 -fPIC -DPIC -DPIC conftest.cpp >&5
| configure:15417: $? = 0
| configure:15430: result: yes
| configure:15451: checking if g++ static flag -static works
| configure:15479: result: no
| configure:15491: checking if g++ supports -c -o file.o
| configure:15512: g++ -c -g -O2 -o out/conftest2.o conftest.cpp >&5
| configure:15516: $? = 0
| configure:15538: result: yes
| configure:15543: checking if g++ supports -c -o file.o
| configure:15590: result: yes
| configure:15620: checking whether the g++ linker (/usr/bin/ld) supports
shared libraries
| configure:15646: result: yes
| configure:15783: checking dynamic linker characteristics
| configure:16169: g++ -o conftest -g -O2 -Wl,-rpath -Wl,/foo conftest.cpp
-ldl >&5
| configure:16176: $? = 0
| configure:16406: result: GNU/Linux ld.so
| configure:16457: checking how to hardcode library paths into programs
| configure:16482: result: immediate
| configure:16576: checking for g77
| configure:16592: found /usr/bin/g77
| configure:16603: result: g77
| configure:16633: checking for Fortran 77 compiler version
| configure:16641: g77 --version >&5
| GNU Fortran (GCC) 3.4.5
| Copyright (C) 2004 Free Software Foundation, Inc.
|
| GNU Fortran comes with NO WARRANTY, to the extent permitted by law.
| You may redistribute copies of GNU Fortran
| under the terms of the GNU General Public License.
| For more information about these matters, see the file named COPYING
| or type the command `info -f g77 Copying'.
| configure:16645: $? = 0
| configure:16652: g77 -v >&5
| Reading specs from
/usr/packages.bin/gcc/3.4.5-persistent/bin/../lib/gcc/i686-pc-linux-gnu/3.4.5/specs
| Configured with: /usr/packages/gcc/3.4.5/configure --with-gnu-ld
--with-gnu-as --with-system-zlib --enable-shared --disable-static
--enable-threads --enable-threads --enable-__cxa_atexit --enable-threads
--enable-__cxa_atexit --prefix=/usr
| Thread model: posix
| gcc version 3.4.5
| configure:16656: $? = 0
| configure:16663: g77 -V >&5
| g77: `-V' option must have argument
| configure:16667: $? = 1
| configure:16675: checking whether we are using the GNU Fortran 77 compiler
| configure:16694: g77 -c conftest.F >&5
| configure:16701: $? = 0
| configure:16718: result: yes
| configure:16724: checking whether g77 accepts -g
| configure:16741: g77 -c -g conftest.f >&5
| configure:16748: $? = 0
| configure:16764: result: yes
| configure:16900: checking if libtool supports shared libraries
| configure:16902: result: yes
| configure:16905: checking whether to build shared libraries
| configure:16925: result: yes
| configure:16928: checking whether to build static libraries
| configure:16932: result: no
| configure:16946: checking for g77 option to produce PIC
| configure:17197: result: -fPIC
| configure:17206: checking if g77 PIC flag -fPIC works
| configure:17224: g77 -c -g -O2 -fPIC conftest.f >&5
| configure:17228: $? = 0
| configure:17241: result: yes
| configure:17262: checking if g77 static flag -static works
| configure:17290: result: no
| configure:17302: checking if g77 supports -c -o file.o
| configure:17323: g77 -c -g -O2 -o out/conftest2.o conftest.f >&5
| configure:17327: $? = 0
| configure:17349: result: yes
| configure:17354: checking if g77 supports -c -o file.o
| configure:17401: result: yes
| configure:17431: checking whether the g77 linker (/usr/bin/ld) supports
shared libraries
| configure:18464: result: yes
| configure:18601: checking dynamic linker characteristics
| configure:18977: g77 -o conftest -g -O2 -Wl,-rpath -Wl,/foo conftest.f -ldl
>&5
| configure:18984: $? = 0
| configure:19214: result: GNU/Linux ld.so
| configure:19265: checking how to hardcode library paths into programs
| configure:19290: result: immediate
| configure:19377: checking for gfortran
| configure:19393: found /usr/bin/gfortran
| configure:19404: result: gfortran
| configure:19434: checking for Fortran compiler version
| configure:19442: gfortran --version >&5
| GNU Fortran (GCC) 4.2.4 20080217 (prerelease)
| Copyright (C) 2007 Free Software Foundation, Inc.
|
| GNU Fortran comes with NO WARRANTY, to the extent permitted by law.
| You may redistribute copies of GNU Fortran
| under the terms of the GNU General Public License.
| For more information about these matters, see the file named COPYING
|
| configure:19446: $? = 0
| configure:19453: gfortran -v >&5
| Reading specs from
/usr/packages.bin/gcc/4.2-080216/bin/../lib/gcc/i686-pc-linux-gnu/4.2.4/specs
| Target: i686-pc-linux-gnu
| Configured with: /usr/packages/gcc/4.2-080216/configure --with-gnu-ld
--with-gnu-as --with-system-zlib --disable-examples --enable-checking=release
--disable-libstdcxx-pch --enable-shared --disable-static --enable-threads
--enable-__cxa_atexit --enable-libada --enable-libssp --enable-plugin
--enable-gconf-peer --enable-java-awt=xlib,gtk --enable-xmlj
--enable-tool-wrappers --enable-objc-gc --prefix=/usr --build=i686-pc-linux-gnu
--host=i686-pc-linux-gnu
| Thread model: posix
| gcc version 4.2.4 20080217 (prerelease)
| configure:19457: $? = 0
| configure:19464: gfortran -V >&5
| gfortran: '-V' option must have argument
| configure:19468: $? = 1
| configure:19476: checking whether we are using the GNU Fortran compiler
| configure:19495: gfortran -c conftest.F >&5
| configure:19502: $? = 0
| configure:19519: result: yes
| configure:19525: checking whether gfortran accepts -g
| configure:19542: gfortran -c -g conftest.f >&5
| configure:19549: $? = 0
| configure:19565: result: yes
| configure:19698: checking if libtool supports shared libraries
| configure:19700: result: yes
| configure:19703: checking whether to build shared libraries
| configure:19723: result: yes
| configure:19726: checking whether to build static libraries
| configure:19730: result: no
| configure:19756: gfortran -c -g -O2 conftest.f >&5
| configure:19759: $? = 0
| configure:19869: checking for gfortran option to produce PIC
| configure:20120: result: -fPIC
| configure:20129: checking if gfortran PIC flag -fPIC works
| configure:20147: gfortran -c -g -O2 -fPIC conftest.f >&5
| configure:20151: $? = 0
| configure:20164: result: yes
| configure:20185: checking if gfortran static flag -static works
| configure:20213: result: no
| configure:20225: checking if gfortran supports -c -o file.o
| configure:20246: gfortran -c -g -O2 -o out/conftest2.o conftest.f >&5
| configure:20250: $? = 0
| configure:20272: result: yes
| configure:20277: checking if gfortran supports -c -o file.o
| configure:20324: result: yes
| configure:20354: checking whether the gfortran linker (/usr/bin/ld) supports
shared libraries
| configure:21387: result: yes
| configure:21524: checking dynamic linker characteristics
| configure:21900: gfortran -o conftest -g -O2 -Wl,-rpath -Wl,/foo conftest.f
-ldl >&5
| configure:21907: $? = 0
| configure:22137: result: GNU/Linux ld.so
| configure:22188: checking how to hardcode library paths into programs
| configure:22213: result: immediate
| configure:22288: checking for gcj
| configure:22304: found /usr/bin/gcj
| configure:22315: result: gcj
| configure:22423: checking if gcj supports -fno-rtti -fno-exceptions
| configure:22458: result: no
| configure:22475: checking for gcj option to produce PIC
| configure:22726: result: -fPIC
| configure:22735: checking if gcj PIC flag -fPIC works
| configure:22753: gcj -c -g -O2 -fPIC conftest.java >&5
| configure:22757: $? = 0
| configure:22770: result: yes
| configure:22791: checking if gcj static flag -static works
| configure:22819: result: no
| configure:22831: checking if gcj supports -c -o file.o
| configure:22852: gcj -c -g -O2 -o out/conftest2.o conftest.java >&5
| configure:22856: $? = 0
| configure:22878: result: yes
| configure:22883: checking if gcj supports -c -o file.o
| configure:22930: result: yes
| configure:22960: checking whether the gcj linker (/usr/bin/ld) supports
shared libraries
| configure:24013: result: yes
| configure:24150: checking how to hardcode library paths into programs
| configure:24175: result: immediate
| configure:24249: checking for windres
| configure:24279: result: no
| configure:24615: creating ./config.status
|
| ## ---------------------- ##
| ## Running config.status. ##
| ## ---------------------- ##
|
| This file was extended by libtool config.status 2.2, which was
| generated by GNU Autoconf 2.61a. Invocation command line was
|
| CONFIG_FILES =
| CONFIG_HEADERS =
| CONFIG_LINKS =
| CONFIG_COMMANDS =
| $ ./config.status
|
| on hades
|
| config.status:1216: creating Makefile
| config.status:1216: creating config.h
| config.status:1514: executing tests/atconfig commands
| config.status:1514: executing depfiles commands
| config.status:1514: executing libtool commands
|
| ## ---------------- ##
| ## Cache variables. ##
| ## ---------------- ##
|
| ac_cv_build=i686-pc-linux-gnu
| ac_cv_c_compiler_gnu=yes
| ac_cv_cxx_compiler_gnu=yes
| ac_cv_env_CCC_set=
| ac_cv_env_CCC_value=
| ac_cv_env_CC_set=
| ac_cv_env_CC_value=
| ac_cv_env_CFLAGS_set=
| ac_cv_env_CFLAGS_value=
| ac_cv_env_CPPFLAGS_set=
| ac_cv_env_CPPFLAGS_value=
| ac_cv_env_CPP_set=
| ac_cv_env_CPP_value=
| ac_cv_env_CXXCPP_set=
| ac_cv_env_CXXCPP_value=
| ac_cv_env_CXXFLAGS_set=
| ac_cv_env_CXXFLAGS_value=
| ac_cv_env_CXX_set=
| ac_cv_env_CXX_value=
| ac_cv_env_F77_set=
| ac_cv_env_F77_value=
| ac_cv_env_FCFLAGS_set=
| ac_cv_env_FCFLAGS_value=
| ac_cv_env_FC_set=
| ac_cv_env_FC_value=
| ac_cv_env_FFLAGS_set=
| ac_cv_env_FFLAGS_value=
| ac_cv_env_LDFLAGS_set=
| ac_cv_env_LDFLAGS_value=
| ac_cv_env_LIBS_set=
| ac_cv_env_LIBS_value=
| ac_cv_env_build_alias_set=
| ac_cv_env_build_alias_value=
| ac_cv_env_host_alias_set=
| ac_cv_env_host_alias_value=
| ac_cv_env_target_alias_set=
| ac_cv_env_target_alias_value=
| ac_cv_f77_compiler_gnu=yes
| ac_cv_fc_compiler_gnu=yes
| ac_cv_func_argz_add=yes
| ac_cv_func_argz_append=yes
| ac_cv_func_argz_count=yes
| ac_cv_func_argz_create_sep=yes
| ac_cv_func_argz_insert=yes
| ac_cv_func_argz_next=yes
| ac_cv_func_argz_stringify=yes
| ac_cv_func_closedir=yes
| ac_cv_func_dlerror=yes
| ac_cv_func_dlopen=no
| ac_cv_func_opendir=yes
| ac_cv_func_readdir=yes
| ac_cv_func_shl_load=no
| ac_cv_func_strlcat=no
| ac_cv_func_strlcpy=no
| ac_cv_header_argz_h=yes
| ac_cv_header_dirent_h=yes
| ac_cv_header_dl_h=no
| ac_cv_header_dld_h=no
| ac_cv_header_dlfcn_h=yes
| ac_cv_header_inttypes_h=yes
| ac_cv_header_mach_o_dyld_h=no
| ac_cv_header_memory_h=yes
| ac_cv_header_stdc=yes
| ac_cv_header_stdint_h=yes
| ac_cv_header_stdlib_h=yes
| ac_cv_header_string_h=yes
| ac_cv_header_strings_h=yes
| ac_cv_header_sys_dl_h=no
| ac_cv_header_sys_stat_h=yes
| ac_cv_header_sys_types_h=yes
| ac_cv_header_unistd_h=yes
| ac_cv_host=i686-pc-linux-gnu
| ac_cv_lib_dl_dlopen=yes
| ac_cv_lib_dld_dld_link=no
| ac_cv_lib_dld_shl_load=no
| ac_cv_objext=o
| ac_cv_path_EGREP='/usr/bin/grep -E'
| ac_cv_path_FGREP='/usr/bin/grep -F'
| ac_cv_path_GREP=/usr/bin/grep
| ac_cv_path_SED=/usr/bin/sed
| ac_cv_path_install='/usr/bin/ginstall -c'
| ac_cv_path_mkdir=/bin/mkdir
| ac_cv_prog_AWK=gawk
| ac_cv_prog_CPP='gcc -E'
| ac_cv_prog_CXXCPP='g++ -E'
| ac_cv_prog_ac_ct_AR=ar
| ac_cv_prog_ac_ct_CC=gcc
| ac_cv_prog_ac_ct_CXX=g++
| ac_cv_prog_ac_ct_F77=g77
| ac_cv_prog_ac_ct_FC=gfortran
| ac_cv_prog_ac_ct_GCJ=gcj
| ac_cv_prog_ac_ct_RANLIB=ranlib
| ac_cv_prog_ac_ct_STRIP=strip
| ac_cv_prog_cc_c89=
| ac_cv_prog_cc_g=yes
| ac_cv_prog_cc_gcc_c_o=yes
| ac_cv_prog_cxx_g=yes
| ac_cv_prog_f77_g=yes
| ac_cv_prog_fc_g=yes
| ac_cv_prog_make_make_set=yes
| ac_cv_search_dlopen=-ldl
| ac_cv_type_error_t=yes
| am_cv_CC_dependencies_compiler_type=gcc3
| am_cv_CXX_dependencies_compiler_type=gcc3
| libltdl_cv_lib_dl_dlopen=yes
| libltdl_cv_preloaded_symbols=yes
| libltdl_cv_shlibext=.so
| lt_cv_deplibs_check_method=pass_all
| lt_cv_dlopen=dlopen
| lt_cv_dlopen_libs=-ldl
| lt_cv_dlopen_self=yes
| lt_cv_dlopen_self_static=no
| lt_cv_file_magic_cmd='$MAGIC_CMD'
| lt_cv_file_magic_test_file=
| lt_cv_ld_reload_flag=-r
| lt_cv_module_path_var=LD_LIBRARY_PATH
| lt_cv_nm_interface='BSD nm'
| lt_cv_objdir=.libs
| lt_cv_path_LD=/usr/bin/ld
| lt_cv_path_LDCXX=/usr/bin/ld
| lt_cv_path_NM='/usr/bin/nm -B'
| lt_cv_prog_compiler_c_o=yes
| lt_cv_prog_compiler_c_o_CXX=yes
| lt_cv_prog_compiler_c_o_F77=yes
| lt_cv_prog_compiler_c_o_FC=yes
| lt_cv_prog_compiler_c_o_GCJ=yes
| lt_cv_prog_compiler_c_o_RC=yes
| lt_cv_prog_compiler_pic_works=yes
| lt_cv_prog_compiler_pic_works_CXX=yes
| lt_cv_prog_compiler_pic_works_F77=yes
| lt_cv_prog_compiler_pic_works_FC=yes
| lt_cv_prog_compiler_pic_works_GCJ=yes
| lt_cv_prog_compiler_rtti_exceptions=no
| lt_cv_prog_compiler_static_works=yes
| lt_cv_prog_compiler_static_works_CXX=no
| lt_cv_prog_compiler_static_works_F77=no
| lt_cv_prog_compiler_static_works_FC=no
| lt_cv_prog_compiler_static_works_GCJ=no
| lt_cv_prog_gnu_ld=yes
| lt_cv_prog_gnu_ldcxx=yes
| lt_cv_sys_argz_works=yes
| lt_cv_sys_dlopen_deplibs=yes
| lt_cv_sys_dlsearch_path='/lib /usr/lib /usr/lib/mysql /usr/lib/octave-3.0.0
/usr/local/lib /usr/lib/firefox /usr/lib/htdig
/usr/lib/gnustep/System/Library/Libraries '
| lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][
]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
| lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/
{\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/
{"\2", (void *) \&\2},/p'\'''
| lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^
]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^
]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^
]*\)$/ {"lib\2", (void *) \&\2},/p'\'''
| lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int
\1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
| lt_cv_sys_max_cmd_len=98304
| lt_cv_sys_symbol_underscore=no
|
| ## ----------------- ##
| ## Output variables. ##
| ## ----------------- ##
|
| ACLOCAL='${SHELL} /usr/packages/libtool/i686-hades/libltdl/config/missing
--run aclocal-1.10'
| AMDEPBACKSLASH='\'
| AMDEP_FALSE='#'
| AMDEP_TRUE=''
| AMTAR='${SHELL} /usr/packages/libtool/i686-hades/libltdl/config/missing --run
tar'
| AR='ar'
| ARGZ_H=''
| AS='as'
| AUTOCONF='${SHELL} /usr/packages/libtool/i686-hades/libltdl/config/missing
--run autoconf'
| AUTOHEADER='${SHELL} /usr/packages/libtool/i686-hades/libltdl/config/missing
--run autoheader'
| AUTOM4TE='autom4te'
| AUTOMAKE='${SHELL} /usr/packages/libtool/i686-hades/libltdl/config/missing
--run automake-1.10'
| AUTOTEST='$(AUTOM4TE) --language=autotest'
| AWK='gawk'
| CC='gcc'
| CCDEPMODE='depmode=gcc3'
| CFLAGS='-g -O2'
| CONFIG_STATUS_DEPENDENCIES='$(top_srcdir)/ChangeLog'
| CONF_SUBDIRS='tests/cdemo tests/demo tests/depdemo tests/f77demo tests/fcdemo
tests/mdemo tests/mdemo2 tests/pdemo tests/tagdemo'
| CONVENIENCE_LTDL_FALSE=''
| CONVENIENCE_LTDL_TRUE='#'
| CPP='gcc -E'
| CPPFLAGS=''
| CXX='g++'
| CXXCPP='g++ -E'
| CXXDEPMODE='depmode=gcc3'
| CXXFLAGS='-g -O2'
| CYGPATH_W='echo'
| DEFS='-DHAVE_CONFIG_H'
| DEPDIR='.deps'
| DIST_MAKEFILE_LIST='tests/cdemo/Makefile tests/demo/Makefile
tests/depdemo/Makefile tests/f77demo/Makefile tests/fcdemo/Makefile
tests/mdemo/Makefile tests/mdemo2/Makefile tests/pdemo/Makefile
tests/tagdemo/Makefile '
| DLLTOOL='dlltool'
| DSYMUTIL=''
| DUMPBIN=''
| ECHO_C=''
| ECHO_N='-n'
| ECHO_T=''
| EGREP='/usr/bin/grep -E'
| EXEEXT=''
| F77='g77'
| FC='gfortran'
| FCFLAGS='-g -O2'
| FFLAGS='-g -O2'
| FGREP='/usr/bin/grep -F'
| GCJ='gcj'
| GCJFLAGS='-g -O2'
| GREP='/usr/bin/grep'
| HAVE_CXX_FALSE='#'
| HAVE_CXX_TRUE=''
| HAVE_F77_FALSE='#'
| HAVE_F77_TRUE=''
| HAVE_FC_FALSE='#'
| HAVE_FC_TRUE=''
| HAVE_GCJ_FALSE='#'
| HAVE_GCJ_TRUE=''
| HAVE_RC_FALSE=''
| HAVE_RC_TRUE='#'
| INSTALL_DATA='${INSTALL} -m 644'
| INSTALL_LTDL_FALSE='#'
| INSTALL_LTDL_TRUE=''
| INSTALL_PROGRAM='${INSTALL}'
| INSTALL_SCRIPT='${INSTALL}'
| INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
| LASTRELEASE=''
| LD='/usr/bin/ld'
| LDFLAGS=''
| LIBADD_DL='-ldl '
| LIBADD_DLD_LINK=''
| LIBADD_DLOPEN='-ldl'
| LIBADD_SHL_LOAD=''
| LIBOBJS=' ${LIBOBJDIR}lt__strl$U.o'
| LIBS='-ldl '
| LIBTOOL='$(SHELL) $(top_builddir)/libtool'
| LN_S='ln -s'
| LTDLOPEN='libltdl'
| LTDL_SUBDIR_LIBOBJS_FALSE='#'
| LTDL_SUBDIR_LIBOBJS_TRUE=''
| LTLIBOBJS=' ${LIBOBJDIR}lt__strl$U.lo'
| LT_CONFIG_H='config.h'
| LT_DLLOADERS=' libltdl/dlopen.la'
| LT_DLPREOPEN='-dlpreopen libltdl/dlopen.la '
| M4SH='$(AUTOM4TE) --language=m4sh'
| MAKEINFO='${SHELL} /usr/packages/libtool/i686-hades/libltdl/config/missing
--run makeinfo'
| NM='/usr/bin/nm -B'
| NMEDIT=''
| OBJDUMP='objdump'
| OBJEXT='o'
| PACKAGE='libtool'
| PACKAGE_BUGREPORT='address@hidden'
| PACKAGE_NAME='libtool'
| PACKAGE_STRING='libtool 2.2'
| PACKAGE_TARNAME='libtool'
| PACKAGE_VERSION='2.2'
| PATH_SEPARATOR=':'
| RANLIB='ranlib'
| RC=''
| SED='/usr/bin/sed'
| SET_MAKE=''
| SHELL='/bin/sh'
| STRIP='strip'
| TIMESTAMP=' 1.2599 2008/03/02 00:05:01'
| VERSION='2.2'
| abs_top_builddir=''
| abs_top_srcdir=''
| ac_ct_CC='gcc'
| ac_ct_CXX='g++'
| ac_ct_DUMPBIN=''
| ac_ct_F77='g77'
| ac_ct_FC='gfortran'
| aclocaldir='${datadir}/aclocal'
| am__fastdepCC_FALSE='#'
| am__fastdepCC_TRUE=''
| am__fastdepCXX_FALSE='#'
| am__fastdepCXX_TRUE=''
| am__include='include'
| am__isrc=''
| am__leading_dot='.'
| am__quote=''
| am__tar='${AMTAR} chof - "$$tardir"'
| am__untar='${AMTAR} xf -'
| bindir='${exec_prefix}/bin'
| build='i686-pc-linux-gnu'
| build_alias=''
| build_cpu='i686'
| build_os='linux-gnu'
| build_vendor='pc'
| datadir='${datarootdir}'
| datarootdir='${prefix}/share'
| docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
| dvidir='${docdir}'
| exec_prefix='${prefix}'
| host='i686-pc-linux-gnu'
| host_alias=''
| host_cpu='i686'
| host_os='linux-gnu'
| host_vendor='pc'
| htmldir='${docdir}'
| includedir='${prefix}/include'
| infodir='${datarootdir}/info'
| install_sh='$(SHELL)
/usr/packages/libtool/i686-hades/libltdl/config/install-sh'
| libdir='${exec_prefix}/lib'
| libexecdir='${exec_prefix}/libexec'
| localedir='${datarootdir}/locale'
| localstatedir='${prefix}/var'
| lt_ECHO='echo'
| mandir='${datarootdir}/man'
| mkdir_p='/bin/mkdir -p'
| oldincludedir='/usr/include'
| package_revision='1.2599'
| pdfdir='${docdir}'
| pkgdatadir='${datadir}/libtool'
| prefix='/usr/local'
| program_transform_name='s,x,x,'
| psdir='${docdir}'
| sbindir='${exec_prefix}/sbin'
| sharedstatedir='${prefix}/com'
| sys_symbol_underscore='no'
| sysconfdir='${prefix}/etc'
| target_alias=''
|
| ## ----------- ##
| ## confdefs.h. ##
| ## ----------- ##
|
| #define PACKAGE_NAME "libtool"
| #define PACKAGE_TARNAME "libtool"
| #define PACKAGE_VERSION "2.2"
| #define PACKAGE_STRING "libtool 2.2"
| #define PACKAGE_BUGREPORT "address@hidden"
| #define PACKAGE "libtool"
| #define VERSION "2.2"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define LT_MODULE_EXT ".so"
| #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| #define LT_DLSEARCH_PATH
"/lib:/usr/lib:/usr/lib/mysql:/usr/lib/octave-3.0.0:/usr/local/lib:/usr/lib/firefox:/usr/lib/htdig:/usr/lib/gnustep/System/Library/Libraries"
| #define HAVE_LIBDL 1
| #define HAVE_DLERROR 1
| #define HAVE_LIBDLLOADER 1
| #define HAVE_ARGZ_H 1
| #define HAVE_ERROR_T 1
| #define HAVE_ARGZ_ADD 1
| #define HAVE_ARGZ_APPEND 1
| #define HAVE_ARGZ_COUNT 1
| #define HAVE_ARGZ_CREATE_SEP 1
| #define HAVE_ARGZ_INSERT 1
| #define HAVE_ARGZ_NEXT 1
| #define HAVE_ARGZ_STRINGIFY 1
| #define HAVE_WORKING_ARGZ 1
| #define HAVE_PRELOADED_SYMBOLS 1
| #define LTDL_DLOPEN_SELF_WORKS 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DIRENT_H 1
| #define HAVE_CLOSEDIR 1
| #define HAVE_OPENDIR 1
| #define HAVE_READDIR 1
|
| configure: exit 0
|
| ## ---------------------- ##
| ## Running config.status. ##
| ## ---------------------- ##
|
| This file was extended by libtool config.status 2.2, which was
| generated by GNU Autoconf 2.61a. Invocation command line was
|
| CONFIG_FILES =
| CONFIG_HEADERS =
| CONFIG_LINKS =
| CONFIG_COMMANDS =
| $ ./config.status libtool
|
| on hades
|
| config.status:1514: executing libtool commands
- testsuite: 24 25 64 failed,
Nix <=
- Re: testsuite: 24 25 64 failed, Ralf Wildenhues, 2008/03/24
- Re: testsuite: 24 25 64 failed, Nix, 2008/03/24
- Re: testsuite: 24 25 64 failed, Ralf Wildenhues, 2008/03/24
- Re: testsuite: 24 25 64 failed, Nix, 2008/03/24
- Re: testsuite: 24 25 64 failed, Ralf Wildenhues, 2008/03/24
- Re: testsuite: 24 25 64 failed, Nix, 2008/03/24
- What semantics should -R have for libs? (was: testsuite: 24 25 64 failed), Ralf Wildenhues, 2008/03/24
- Fix disable-static -all-static (was: testsuite: 24 25 64 failed), Ralf Wildenhues, 2008/03/24
- Re: Fix disable-static -all-static, Nix, 2008/03/24
- Re: Fix disable-static -all-static, Ralf Wildenhues, 2008/03/24