probable bug-make

[Giancarlo Bassi]

Dear bug-make team,

On my system
* Intel Pentium with F0 0F bug
* Linux 2.4.20

I ascertain that the compiler gcc-3.2.2
points out a bug compiling Kmovisto-0.51

Indeed:

a) this is my dmesg output:
------------------------------------------------------------------
Linux version 2.4.20 (address@hidden) (gcc version 3.2.2) #2 Mon Mar 17 
22:02:15 PST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000002000000 (usable)
32MB LOWMEM available.
On node 0 totalpages: 8192
zone(0): 4096 pages.
zone(1): 4096 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Detected 132.637 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 263.78 BogoMIPS
Memory: 29340k/32768k available (1733k kernel code, 3040k reserved, 568k data, 
112k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Intel Pentium with F0 0F bug - workaround enabled.
CPU:     After generic, caps: 000001bf 00000000 00000000 00000000
CPU:             Common caps: 000001bf 00000000 00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (address@hidden)
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT 
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD646: IDE controller on PCI bus 00 dev 18
PCI: No IRQ known for interrupt pin A of device 00:03.0. Please try using 
pci=biosirq.
CMD646: chipset revision 1
CMD646: not 100% native mode: will probe irqs later
CMD646: chipset revision 0x01, MultiWord DMA Limited, IRQ workaround enabled
    ide0: BM-DMA at 0x7800-0x7807, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x7808-0x780f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG VG33402A (3.40GB), ATA DISK drive
hdb: , ATAPI CD/DVD-ROM drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: FUJITSU M1636TAU, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0388784, I/O limit 4095Mb (mask 0xffffffff)
hda: 6643728 sectors (3402 MB) w/112KiB Cache, CHS=823/128/63, (U)DMA
blk: queue c0388ac8, I/O limit 4095Mb (mask 0xffffffff)
hdc: 2511840 sectors (1286 MB) w/128KiB Cache, CHS=2491/16/63, DMA
hdb: ATAPI 20X CD-ROM drive, 1800kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2
 hdc: [PTBL] [622/64/63] hdc1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :    92.000 MB/sec
   32regs    :    92.800 MB/sec
raid5: using function: 32regs (92.800 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(22/07/2002)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 5632
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 5632
FAT: bogus logical sector size 5632
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
Adding Swap: 64508k swap-space (priority 1)
end_request: I/O error, dev 02:00 (floppy), sector 0
reiserfs: checking transaction log (device 16:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Genius GS4500 scanner driver, version 2.4d
GS4500: DMA 3 IRQ 11 at 0x0272 - 0x027b
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:38:38 Mar 11 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered

------------------------------------------------------------------


b)

Compiling Kmovisto, downloaded from the Linux GPL Software Unesco site,

I had this following message:

(I don't know any more)

-------------------------------------------------------------------
 T_THREAD_SUPPORT  -D_REENTRANT  -Wnon-virtual-dtor -Wno-long-long
 -Wbad-function-cast -Wundef -Wall -pedantic -W -Wpointer-arith
 -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500
 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions
-fno-check-new
 -c -o kmovistoview.o `test -f kmovistoview.cpp || echo
 './'`kmovistoview.cpp
 source='kmovistodoc.cpp' object='kmovistodoc.o' libtool=no \
 depfile='.deps/kmovistodoc.Po' tmpdepfile='.deps/kmovistodoc.TPo' \
 depmode=gcc3 /bin/sh ../admin/depcomp \
 g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/lib/qt/include
 -I/usr/X11R6/include  -DQT_THREAD_SUPPORT  -D_REENTRANT
 -Wnon-virtual-dtor -Wno-long-long -Wbad-function-cast -Wundef -Wall
 -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi
 -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2
 -fno-exceptions -fno-check-new  -c -o kmovistodoc.o `test -f
 kmovistodoc.cpp || echo './'`kmovistodoc.cpp
 g++: Internal error: Terminated (program cc1plus)
 Please submit a full bug report.
 See <URL:http://www.gnu.org/software/gcc/bugs.html> for instructions.
 make[3]: *** [kmovistodoc.o] Error 1
----------------------------------------------------------------------

As you can see I have a  bug-Pentium
and a bug gcc-3.2.2 too.


Kind regards and Cheers,
        Giancarlo Bassi