# Makefile.in generated by automake 1.16.5 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994-2021 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. VPATH = .. am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/tex-live pkgincludedir = $(includedir)/tex-live pkglibdir = $(libdir)/tex-live pkglibexecdir = $(libexecdir)/tex-live am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-pc-cygwin host_triplet = x86_64-pc-cygwin subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-cairo-flags.m4 \ $(top_srcdir)/m4/kpse-common.m4 \ $(top_srcdir)/m4/kpse-cxx-hack.m4 \ $(top_srcdir)/m4/kpse-freetype2-flags.m4 \ $(top_srcdir)/m4/kpse-gd-flags.m4 \ $(top_srcdir)/m4/kpse-gmp-flags.m4 \ $(top_srcdir)/m4/kpse-graphite2-flags.m4 \ $(top_srcdir)/m4/kpse-harfbuzz-flags.m4 \ $(top_srcdir)/m4/kpse-icu-flags.m4 \ $(top_srcdir)/m4/kpse-kpathsea-flags.m4 \ $(top_srcdir)/m4/kpse-libpaper-flags.m4 \ $(top_srcdir)/m4/kpse-libpng-flags.m4 \ $(top_srcdir)/m4/kpse-lt-hack.m4 \ $(top_srcdir)/m4/kpse-mktex.m4 \ $(top_srcdir)/m4/kpse-mpfr-flags.m4 \ $(top_srcdir)/m4/kpse-options.m4 \ $(top_srcdir)/m4/kpse-pixman-flags.m4 \ $(top_srcdir)/m4/kpse-pkgs.m4 \ $(top_srcdir)/m4/kpse-potrace-flags.m4 \ $(top_srcdir)/m4/kpse-pplib-flags.m4 \ $(top_srcdir)/m4/kpse-ptexenc-flags.m4 \ $(top_srcdir)/m4/kpse-setup.m4 \ $(top_srcdir)/m4/kpse-teckit-flags.m4 \ $(top_srcdir)/m4/kpse-warnings.m4 \ $(top_srcdir)/m4/kpse-web2c.m4 $(top_srcdir)/m4/kpse-win32.m4 \ $(top_srcdir)/m4/kpse-xpdf-flags.m4 \ $(top_srcdir)/m4/kpse-zlib-flags.m4 \ $(top_srcdir)/m4/kpse-zziplib-flags.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/tardate.ac \ $(top_srcdir)/version.ac \ $(top_srcdir)/utils/autosp/ac/withenable.ac \ $(top_srcdir)/utils/axodraw2/ac/withenable.ac \ $(top_srcdir)/utils/devnag/ac/withenable.ac \ $(top_srcdir)/utils/lacheck/ac/withenable.ac \ $(top_srcdir)/utils/m-tx/ac/withenable.ac \ $(top_srcdir)/utils/pmx/ac/withenable.ac \ $(top_srcdir)/utils/ps2eps/ac/withenable.ac \ $(top_srcdir)/utils/t1utils/ac/withenable.ac \ $(top_srcdir)/utils/texdoctk/ac/withenable.ac \ $(top_srcdir)/utils/tpic2pdftex/ac/withenable.ac \ $(top_srcdir)/utils/vlna/ac/withenable.ac \ $(top_srcdir)/utils/xindy/ac/withenable.ac \ $(top_srcdir)/utils/xindy/ac/xindy.ac \ $(top_srcdir)/utils/xindy/ac/clisp.ac \ $(top_srcdir)/utils/xml2pmx/ac/withenable.ac \ $(top_srcdir)/utils/xpdfopen/ac/withenable.ac \ $(top_srcdir)/texk/web2c/ac/withenable.ac \ $(top_srcdir)/texk/web2c/ac/web2c.ac \ $(top_srcdir)/texk/afm2pl/ac/withenable.ac \ $(top_srcdir)/texk/bibtex-x/ac/withenable.ac \ $(top_srcdir)/texk/bibtex-x/ac/bibtex-x.ac \ $(top_srcdir)/texk/chktex/ac/withenable.ac \ $(top_srcdir)/texk/cjkutils/ac/withenable.ac \ $(top_srcdir)/texk/detex/ac/withenable.ac \ $(top_srcdir)/texk/dtl/ac/withenable.ac \ $(top_srcdir)/texk/dvi2tty/ac/withenable.ac \ $(top_srcdir)/texk/dvidvi/ac/withenable.ac \ $(top_srcdir)/texk/dviljk/ac/withenable.ac \ $(top_srcdir)/texk/dviout-util/ac/withenable.ac \ $(top_srcdir)/texk/dvipdfm-x/ac/withenable.ac \ $(top_srcdir)/texk/dvipng/ac/withenable.ac \ $(top_srcdir)/texk/dvipng/ac/dvipng.ac \ $(top_srcdir)/texk/dvipos/ac/withenable.ac \ $(top_srcdir)/texk/dvipsk/ac/withenable.ac \ $(top_srcdir)/texk/dvisvgm/ac/withenable.ac \ $(top_srcdir)/texk/gregorio/ac/withenable.ac \ $(top_srcdir)/texk/gsftopk/ac/withenable.ac \ $(top_srcdir)/texk/lcdf-typetools/ac/withenable.ac \ $(top_srcdir)/texk/lcdf-typetools/ac/lcdf-typetools.ac \ $(top_srcdir)/texk/makeindexk/ac/withenable.ac \ $(top_srcdir)/texk/makejvf/ac/withenable.ac \ $(top_srcdir)/texk/mendexk/ac/withenable.ac \ $(top_srcdir)/texk/musixtnt/ac/withenable.ac \ $(top_srcdir)/texk/ps2pk/ac/withenable.ac \ $(top_srcdir)/texk/psutils/ac/withenable.ac \ $(top_srcdir)/texk/seetexk/ac/withenable.ac \ $(top_srcdir)/texk/tex4htk/ac/withenable.ac \ $(top_srcdir)/texk/ttf2pk2/ac/withenable.ac \ $(top_srcdir)/texk/ttfdump/ac/withenable.ac \ $(top_srcdir)/texk/upmendex/ac/withenable.ac \ $(top_srcdir)/texk/xdvik/ac/withenable.ac \ $(top_srcdir)/texk/xdvik/ac/xdvik.ac \ $(top_srcdir)/texk/texlive/ac/withenable.ac \ $(top_srcdir)/texk/texlive/ac/texlive.ac \ $(top_srcdir)/libs/pplib/ac/withenable.ac \ $(top_srcdir)/libs/harfbuzz/ac/withenable.ac \ $(top_srcdir)/libs/icu/ac/withenable.ac \ $(top_srcdir)/libs/teckit/ac/withenable.ac \ $(top_srcdir)/libs/graphite2/ac/withenable.ac \ $(top_srcdir)/libs/zziplib/ac/withenable.ac \ $(top_srcdir)/libs/xpdf/ac/withenable.ac \ $(top_srcdir)/libs/mpfr/ac/withenable.ac \ $(top_srcdir)/libs/gmp/ac/withenable.ac \ $(top_srcdir)/libs/cairo/ac/withenable.ac \ $(top_srcdir)/libs/pixman/ac/withenable.ac \ $(top_srcdir)/libs/gd/ac/withenable.ac \ $(top_srcdir)/libs/potrace/ac/withenable.ac \ $(top_srcdir)/libs/freetype2/ac/withenable.ac \ $(top_srcdir)/libs/libpng/ac/withenable.ac \ $(top_srcdir)/libs/libpaper/ac/withenable.ac \ $(top_srcdir)/libs/luajit/ac/withenable.ac \ $(top_srcdir)/libs/lua53/ac/withenable.ac \ $(top_srcdir)/libs/zlib/ac/withenable.ac \ $(top_srcdir)/texk/ptexenc/ac/withenable.ac \ $(top_srcdir)/texk/kpathsea/ac/withenable.ac \ $(top_srcdir)/texk/kpathsea/ac/mktex.ac \ $(top_srcdir)/texk/kpathsea/ac/kpathsea.ac \ $(top_srcdir)/texk/ptexenc/ac/ptexenc.ac \ $(top_srcdir)/libs/zlib/ac/zlib.ac \ $(top_srcdir)/libs/libpaper/ac/libpaper.ac \ $(top_srcdir)/libs/libpng/ac/libpng.ac \ $(top_srcdir)/libs/freetype2/ac/freetype2.ac \ $(top_srcdir)/libs/potrace/ac/potrace.ac \ $(top_srcdir)/libs/gd/ac/gd.ac \ $(top_srcdir)/libs/pixman/ac/pixman.ac \ $(top_srcdir)/libs/cairo/ac/cairo.ac \ $(top_srcdir)/libs/gmp/ac/gmp.ac \ $(top_srcdir)/libs/mpfr/ac/mpfr.ac \ $(top_srcdir)/libs/xpdf/ac/xpdf.ac \ $(top_srcdir)/libs/zziplib/ac/zziplib.ac \ $(top_srcdir)/libs/graphite2/ac/graphite2.ac \ $(top_srcdir)/libs/teckit/ac/teckit.ac \ $(top_srcdir)/libs/icu/ac/icu.ac \ $(top_srcdir)/libs/harfbuzz/ac/harfbuzz.ac \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_$(V)) am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir distdir-am dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/am/dist_hook.am \ $(srcdir)/am/recurse.am $(top_srcdir)/build-aux/compile \ $(top_srcdir)/build-aux/config.guess \ $(top_srcdir)/build-aux/config.sub \ $(top_srcdir)/build-aux/install-sh \ $(top_srcdir)/build-aux/ltmain.sh \ $(top_srcdir)/build-aux/missing ChangeLog README \ build-aux/ar-lib build-aux/compile build-aux/config.guess \ build-aux/config.sub build-aux/depcomp build-aux/install-sh \ build-aux/ltmain.sh build-aux/missing build-aux/texinfo.tex \ build-aux/ylwrap DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" GZIP_ENV = --best DIST_ARCHIVES = $(distdir).tar.xz DIST_TARGETS = dist-xz # Exists only to be overridden by the user if desired. AM_DISTCHECK_DVI_TARGET = dvi am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' ACLOCAL = ${SHELL} '/home/kbrown/src/texlive/test.x86_64/build-aux/missing' aclocal-1.16 --force AMTAR = $${TAR-tar} AM_DEFAULT_VERBOSITY = 0 AR = ar AS = as AUTOCONF = ${SHELL} '/home/kbrown/src/texlive/test.x86_64/build-aux/missing' autoconf AUTOHEADER = ${SHELL} '/home/kbrown/src/texlive/test.x86_64/build-aux/missing' autoheader AUTOMAKE = ${SHELL} '/home/kbrown/src/texlive/test.x86_64/build-aux/missing' automake-1.16 AWK = gawk CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -g -O2 CONF_SUBDIRS = texk/kpathsea texk/ptexenc CPP = gcc -E CPPFLAGS = CSCOPE = cscope CTAGS = ctags CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -g -O2 CYGPATH_W = cygpath -w DEFS = -DPACKAGE_NAME=\"TeX\ Live\" -DPACKAGE_TARNAME=\"tex-live\" -DPACKAGE_VERSION=\"2022-03-21\" -DPACKAGE_STRING=\"TeX\ Live\ 2022-03-21\" -DPACKAGE_BUGREPORT=\"tex-k@tug.org\" -DPACKAGE_URL=\"\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_DLFCN_H=1 -DPACKAGE=\"tex-live\" -DVERSION=\"2022-03-21\" -DLT_OBJDIR=\".libs/\" -DHAVE_FSEEKO=1 -DHAVE_DIRENT_H=1 -DHAVE_ASSERT_H=1 -DHAVE_FLOAT_H=1 -DHAVE_LIMITS_H=1 -DHAVE_PWD_H=1 -DHAVE_STDLIB_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_PUTENV=1 -DHAVE_GETCWD=1 -DHAVE_GETWD=1 -DHAVE_MEMCMP=1 -DHAVE_MEMCPY=1 -DHAVE_MKSTEMP=1 -DHAVE_MKTEMP=1 -DHAVE_STRCHR=1 -DHAVE_STRRCHR=1 -DHAVE_DECL_ISASCII=1 -DHAVE_STRUCT_STAT_ST_MTIM=1 DEPDIR = .deps DLLTOOL = dlltool DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E ETAGS = etags EXEEXT = .exe FGREP = /usr/bin/grep -F FT2_CONFIG = freetype-config GREP = /usr/bin/grep ICU_CONFIG = icu-config INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LD = /usr/x86_64-pc-cygwin/bin/ld.exe LDFLAGS = -Wl,--no-insert-timestamp -Wl,--stack,0x800000 LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LN_S = ln -s LTLIBOBJS = LT_SYS_LIBRARY_PATH = MAINT = # MAKEINFO = ${SHELL} '/home/kbrown/src/texlive/test.x86_64/build-aux/missing' makeinfo MAKE_SUBDIRS = texk/kpathsea texk/ptexenc MANIFEST_TOOL = : MKDIR_P = /usr/bin/mkdir -p NM = /usr/bin/nm -B NMEDIT = OBJDUMP = objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = tex-live PACKAGE_BUGREPORT = tex-k@tug.org PACKAGE_NAME = TeX Live PACKAGE_STRING = TeX Live 2022-03-21 PACKAGE_TARNAME = tex-live PACKAGE_URL = PACKAGE_VERSION = 2022-03-21 PATH_SEPARATOR = : PKG_CONFIG = pkg-config RANLIB = ranlib SED = /usr/bin/sed SET_MAKE = SHELL = /bin/sh STRIP = strip VERSION = 2022-03-21 WARNING_CFLAGS = -Wimplicit -Wreturn-type WARNING_CXXFLAGS = -Wreturn-type -Wno-write-strings XMKMF = X_CFLAGS = X_EXTRA_LIBS = X_LIBS = X_PRE_LIBS = -lSM -lICE abs_builddir = /home/kbrown/src/texlive/test.x86_64/Work abs_srcdir = /home/kbrown/src/texlive/test.x86_64/Work/.. abs_top_builddir = /home/kbrown/src/texlive/test.x86_64/Work abs_top_srcdir = /home/kbrown/src/texlive/test.x86_64/Work/.. ac_ct_AR = ar ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_DUMPBIN = am__include = include am__leading_dot = . am__quote = am__tar = tar --format=posix -chf - "$$tardir" am__untar = tar -xf - bindir = ${exec_prefix}/bin/x86_64-pc-cygwin build = x86_64-pc-cygwin build_alias = build_cpu = x86_64 build_os = cygwin build_vendor = pc builddir = . datadir = /home/kbrown/src/texlive/test.x86_64/inst datarootdir = ${prefix} docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = x86_64-pc-cygwin host_alias = host_cpu = x86_64 host_os = cygwin host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${prefix}/texmf-dist/doc/info install_sh = ${SHELL} /home/kbrown/src/texlive/test.x86_64/build-aux/install-sh libdir = ${exec_prefix}/lib/x86_64-pc-cygwin libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${prefix}/texmf-dist/doc/man mkdir_p = $(MKDIR_P) oldincludedir = /usr/include pdfdir = ${docdir} prefix = /home/kbrown/src/texlive/test.x86_64/inst program_transform_name = s,x,x, psdir = ${docdir} runstatedir = ${localstatedir}/run sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = .. subdirs = auxdir/auxsub libs utils texk sysconfdir = ${prefix}/etc target_alias = top_build_prefix = top_builddir = . top_srcdir = .. AM_DISTCHECK_CONFIGURE_FLAGS = -C distuninstallcheck_listfiles = find . -type f -o -type l -print distcleancheck_listfiles = find . -type f -o -type l -print EXTRA_DIST = \ Build \ README.0overview \ README.1prerequisites \ README.2building \ README.3installing \ README.4layout \ README.5configure \ README.6cross \ README.7coding \ build-aux/README.TL \ m4/ChangeLog \ m4/README \ reautoconf NEVER_DIST = `find . $(NEVER_NAMES)` NEVER_NAMES = -name .svn NEVER_NAMES_SUB = -o -name .deps -o -name .dirstamp -o -name '*.$(OBJEXT)' NEVER_NAMES_LT = -o -name .libs -o -name '*.lo' # Files not to be distributed SUBDIRS = . doc $(MAKE_SUBDIRS) libs utils texk DIST_SUBDIRS = auxdir/auxsub doc $(CONF_SUBDIRS) libs utils texk recurse_this = recurse_top = cf_silent = $(cf_silent_$(V)) cf_silent_ = $(cf_silent_$(AM_DEFAULT_VERBOSITY)) cf_silent_0 = --silent cf_silent_1 = CONFIG_AUX = $(recurse_top)subsubdir-conf.cmd # Run texlinks here since the binaries won't be there # at install-data, and fmtutil.cnf won't be there at install-exec, # and there is no install-hook or install-local. texlinks_dir = texk/texlive/tl_support # should be harmless to run it, but just in case: build_info_target = buildinfo check_target = check # Allow for skipping make check if needed. #check_target = skip all: all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(srcdir)/am/dist_hook.am $(srcdir)/am/recurse.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ esac; $(srcdir)/am/dist_hook.am $(srcdir)/am/recurse.am $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: # $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): # $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-zstd: distdir tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ *.tar.zst*) \ zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile all-local installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-exec-hook install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) install-am install-exec-am \ install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ distclean-generic distclean-libtool distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-exec-hook install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am .PRECIOUS: Makefile dist-hook: cd "$(distdir)" && rm -rf $(NEVER_DIST) all-local: recurse .PHONY: recurse recurse: $(CONFIG_AUX) @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ list='$(CONF_SUBDIRS)'; for one_dir in $$list; do \ if test ! -f $$one_dir/Makefile; then \ test -d $$one_dir || $(MKDIR_P) $$one_dir; \ cmd=`cat $(CONFIG_AUX) | sed "s,auxdir/auxsub,$(recurse_this)$$one_dir,g"`; \ case " $(MAKE_SUBDIRS) " in \ *" $$one_dir "*) skip=;; \ *) skip=' --disable-build';; \ esac; \ (cd $$one_dir && echo "=== configuring in $$one_dir (`pwd`)" && \ if $(AM_V_P); then echo "make: running $(SHELL) $$cmd$$skip"; fi && \ CONFIG_SHELL=$(SHELL) && export CONFIG_SHELL && \ eval $(SHELL) $$cmd$$skip $(cf_silent) || \ { echo "=== configuring in $$one_dir failed"; exit 1; }) && \ if test "x$$skip" = x; then \ echo "Making all in $$one_dir" && \ (cd $$one_dir && $(MAKE) $(AM_MAKEFLAGS) all); \ fi || eval $$failcom; \ fi; \ done; test -z "$$fail" $(CONFIG_AUX): @echo "configure in $(recurse_top)auxdir/auxsub failed to create the file $@" exit 1 # (end of recurse.am) # This (world) is the default target for the ./Build script in TeX Live. .PHONY: world world: all # Serialize 'make all' and 'make install-strip'. @echo "top-level make $@: running install-strip..." $(MAKE) $(AM_MAKEFLAGS) install-strip # # Just in case it's not a full checkout. if test -d "$(texlinks_dir)"; then \ echo "top-level make $@: making run-texlinks in $(texlinks_dir) ..."; \ cd $(texlinks_dir) && $(MAKE) $(AM_MAKEFLAGS) run-texlinks; \ else :; fi # @echo "top-level make $@: running $(check_target)..." $(MAKE) $(AM_MAKEFLAGS) $(check_target) # @echo "top-level make $@ done." # create file buildinfo.log in working directory, to record relevant # information about the build environment. buildinfo: -env MAKE="$(MAKE)" LDFLAGS="$(LDFLAGS)" \ CC="$(CC)" CFLAGS="$(CFLAGS)" \ CXX="$(CXX)" CXXFLAGS="$(CXXFLAGS)" \ OBJCXX="$(OBJCXX)" OBJCXXFLAGS="$(OBJCXXFLAGS)" \ $(srcdir)/doc/buildinfo.sh >buildinfo.log # run buildinfo first. all-recursive: buildinfo install-exec-hook: @echo "WARNING: make install does not result in a usable TeX!" @echo " ! The binaries require the myriad support files." @echo " ! See http://tug.org/texlive/distro.html" @echo " ! and http://tug.org/texlive/build.html#deploy, for example." skip: .PHONY: skip # Convenience targets to run texlinks and reautoconf. .PHONY: texlinks texlinks: cd $(texlinks_dir) && $(MAKE) $(AM_MAKEFLAGS) run-texlinks # Special target to run TRIP and TRAP tests and create diffs. .PHONY: triptrap triptrap: cd texk && $(MAKE) $(AM_MAKEFLAGS) $@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: