[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Bug-parted] i am sorry
From: |
Andrew Clausen |
Subject: |
Re: [Bug-parted] i am sorry |
Date: |
Wed, 20 Sep 2000 19:26:12 +1100 |
Nick Brown wrote:
>
> i am sorry. this isn't really a bug report. in order install linux on my
> computer, i need to shrink my fat32 partition. my computer has an ata/100
> hard drive. the parted disk image uses an old kernel that does not support
> ata/100 drives. could anyone out there please please please compile a
> kernel with ata/100 support? this is in the 2.2.17 kernel, it might be
> under 'experimental.' it uses the Promise chipset. i need a disk image of a
> disk with parted and linux with ata/100 support on it. i will then rawrite
> it to a floppy from my win98 box and use it to shrink my fat32 partition.
>
> thanks a lot anyone who can help!
It's fairly complicated at the moment, to get more drivers, and access
drivers.
I've just written some instructions, for the documentation:
NOTE: the "trick" I mention only works for >= 1.3.x. (i.e. NOT YET)
Unfortunately, the boot disk doesn't support a very wide range of
hardware. If your hard disk isn't supported, then:
(1) Boot off the Parted boot disk.
(2) Insert another (formatted) floppy disk. (Trick: you can format
the floppy with Parted, by doing
"parted /dev/fd0 mklabel loopback mkpartfs primary ext2 0 1.440")
(3) Mount the floppy disk. ("mount -t ext2 /dev/fd0 /mnt/floppy" or
"mount -t vfat /dev/fd0 /mnt/floppy")
(4) Copy /sbin/parted to the floppy. ("cp /sbin/parted /mnt/floppy")
(5) Copy /lib/* to the floppy. ("cp /lib/* /mnt/floppy)
(6) Unmount the floppy. ("umount /mnt/floppy")
(7) Find a boot disk that DOES support your hard disk. (Hint: try looking for
rescue
disks from various distributions on big mirror sites)
(8) Boot off your rescue disk. Mount the disk you copied Parted onto.
(9) Run Parted:
# cd /mnt/floppy
# LD_LIBRARY_PATH=. ./parted
Does that look as long and complicated to you as it does to me? :-(
Andrew Clausen