[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's
From: |
Robitaille, Michael |
Subject: |
Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's |
Date: |
Mon, 7 Nov 2005 16:40:29 -0700 |
>On Sat, Nov 05, 2005 at 05:50:17PM -0700, Robitaille, Michael wrote:
>> The problem is that the software needs to see the eeprom on the
>> daughterboard that I don't have and really don't need.
On Sun, 6 Nov 2005 08:54:21 -0800, Eric Blossom wrote:
> The code that's been in CVS for quite a while treats "no rx daughterboard"
as if there were a Basic Rx
> daughterboard attached.
> See the last few lines for db_basic.py
Should I get the error message;
"Warning: Treating daughterboard with invalid EEPROM contents as if it were
a "Basic RX."
"Warning: This is almost certainly wrong... Use appropriate burn-*-eeprom
utility."
per the code in the last few line of db_basic.py?
I do not get this message when I run usrp_fft.py -R a:0
Mike
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, (continued)
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Eric Blossom, 2005/11/04
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/04
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/04
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/04
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/05
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/07
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's,
Robitaille, Michael <=
- RE: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/08
- RE: [Discuss-gnuradio] Using USRP w/o Daughterboard's, Robitaille, Michael, 2005/11/10
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, address@hidden, 2005/11/11
- Re: [Discuss-gnuradio] Using USRP w/o Daughterboard's, address@hidden, 2005/11/14