[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] error loading usrp firmware
From: |
sitec |
Subject: |
[Discuss-gnuradio] error loading usrp firmware |
Date: |
Mon, 14 May 2007 21:29:02 +0200 |
Hi there.
I am trying to make work my usrp.
after running anything using usrp (for example usrp_oscope.py) i get
this error mesasge:
RuntimeError: Unable to find USRP #0
Probably i don't have firmware installed.
after connecting power, right (closer to usb) LED is blinking at 2 Hz.
So i tried 'usrper load_firmware /usr/share/usrp/rev4/std.ihx'
i got message: 'usrper: found unconfigured usrp; needs firmware.'
LED blinging changed to 1 Hz.
usrper always return message 'failed to find usrp' :
address@hidden:/home/mato# usrper load_firmware
/usr/share/usrp/rev4/std.ihx
usrper: failed to find usrp[0]
address@hidden:/home/mato# usrper load_fpga
/usr/share/usrp/rev4/std_2rxhb_2tx.rbf
usrper: failed to find usrp[0]
address@hidden:/home/mato# usrper led0 on
usrper: failed to find usrp[0]
after unplugging and plugging again power, LED always start to blinking
at 2 hz.
am i doing something wrong?
during test, no boards were connected to the board.
thanks for help.
Sitec.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] error loading usrp firmware,
sitec <=