[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] I&Q on same or separate channels?
From: |
Brian Padalino |
Subject: |
Re: [Discuss-gnuradio] I&Q on same or separate channels? |
Date: |
Thu, 13 Dec 2007 16:58:32 -0500 |
On Dec 13, 2007 4:35 PM, George Nychis <address@hidden> wrote:
> Hi all,
>
> For the in-band code, I'm noticing that it seems like the FPGA is
> packing two I's or two Q's, and not an I and a Q. If you take a look at
> the following plot of a 10MHz sine wave, you will see what I mean. The
> left plot is using the legacy receiver, the right side is using an
> in-band receiver:
> http://www.andrew.cmu.edu/user/gnychis/sines.png
>
> This boils down to the following code:
> http://gnuradio.org/trac/browser/gnuradio/branches/features/inband-usb/usrp/fpga/inband_lib/rx_buffer_inband.v
>
> I'm guessing that Thibaud's original assumption was that I and Q are
> packed in a single channel to be read from. With a single data channel,
> the code will only read from channel 0. Is this incorrect? If so, this
> explains the behavior we're seeing.
>
> If I and Q are on separate channels, are they synchronized?
They are on separate channels, synchronized and are instantiated here:
http://gnuradio.org/trac/browser/gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.v#L235
How do you feel you want to handle it?
Brian
- [Discuss-gnuradio] I&Q on same or separate channels?, George Nychis, 2007/12/13
- Re: [Discuss-gnuradio] I&Q on same or separate channels?,
Brian Padalino <=
- Re: [Discuss-gnuradio] I&Q on same or separate channels?, George Nychis, 2007/12/13
- Re: [Discuss-gnuradio] I&Q on same or separate channels?, Brian Padalino, 2007/12/13
- Re: [Discuss-gnuradio] I&Q on same or separate channels?, George Nychis, 2007/12/14
- Re: [Discuss-gnuradio] I&Q on same or separate channels?, Brian Padalino, 2007/12/16
- Re: [Discuss-gnuradio] I&Q on same or separate channels?, George Nychis, 2007/12/16
- Re: [Discuss-gnuradio] I&Q on same or separate channels?, Brian Padalino, 2007/12/16
- Re: [Discuss-gnuradio] I&Q on same or separate channels?, George Nychis, 2007/12/16
- Re: [Discuss-gnuradio] I&Q on same or separate channels?, George Nychis, 2007/12/16
- Re: [Discuss-gnuradio] I&Q on same or separate channels?, Brian Padalino, 2007/12/16
- Re: [Discuss-gnuradio] I&Q on same or separate channels?, George Nychis, 2007/12/16