[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Problems when receiving after transmit
From: |
Dan Halperin |
Subject: |
Re: [Discuss-gnuradio] Problems when receiving after transmit |
Date: |
Mon, 21 Jan 2008 10:21:28 -0800 |
User-agent: |
Thunderbird 2.0.0.6 (X11/20071022) |
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Interesting. I don't have a logic analyzer handy but after the holiday I
may find someone who knows how to use one. More importantly, do you have
suspicions about the solution? ;)
As another data point, I've found that performing the second receive at
different frequencies can bring the noise floor back to normal. If I
transmit at 2.48G and receive at 2.485G the noise floor is normal. With
some other RX frequencies, (I think 2.445G) the same problem persists.
- -Dan
Johnathan Corgan wrote:
> Dan Halperin wrote:
>> Just-powered on USRP rev 4.2 with RFX2400 rev 2-6-2006. Current SVN.
>>
>> usrp_rx_cfile.py -f 2.485G -d 8 -s pre.dat
>> usrp_siggen.py -i 16 -f 2.485G
>> usrp_rx_cfile.py -f 2.485G -d 8 -s post.dat
>>
>> In the first set of data, the noise level is what I'd expect and
>> everything works hunky-dory. After the siggen, however, it all goes
>> haywire, the noise floor becomes huge even though an adjacent USRP sees
>> nothing.
>
> I wonder if somehow the USRP transmitter is getting left powered up.
> The mixer would be getting random noise and upconverting it to your
> passband. This would feed through from the blocked side of the TX/RX
> switch (about 30dB of attenuation) into the receiver.
>
> You'd have to measure the logic level at the mixer chip enable pin to be
> sure.
>
> If this is the case, I have a suspicion about the cause.
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFHlOKoy9GYuuMoUJ4RAumXAKCv+cDlNFgGxorc7Wpwc4LNZ7ApWQCgxarx
SV6hXvvtbb2Bri+0XsHynHU=
=t3l7
-----END PGP SIGNATURE-----
- [Discuss-gnuradio] Problems when receiving after transmit, Dan Halperin, 2008/01/21
- Re: [Discuss-gnuradio] Problems when receiving after transmit, Dan Halperin, 2008/01/21
- Re: [Discuss-gnuradio] Problems when receiving after transmit, Johnathan Corgan, 2008/01/21
- Re: [Discuss-gnuradio] Problems when receiving after transmit,
Dan Halperin <=
- Re: [Discuss-gnuradio] Problems when receiving after transmit, Johnathan Corgan, 2008/01/21
- Re: [Discuss-gnuradio] Problems when receiving after transmit, George Nychis, 2008/01/21
- Re: [Discuss-gnuradio] Problems when receiving after transmit, Johnathan Corgan, 2008/01/21
- Re: [Discuss-gnuradio] Problems when receiving after transmit, George Nychis, 2008/01/21
- Re: [Discuss-gnuradio] Problems when receiving after transmit, Johnathan Corgan, 2008/01/21
- Re: [Discuss-gnuradio] Problems when receiving after transmit, George Nychis, 2008/01/21
- Re: [Discuss-gnuradio] Problems when receiving after transmit, Johnathan Corgan, 2008/01/21
Re: [Discuss-gnuradio] Problems when receiving after transmit, Johnathan Corgan, 2008/01/21