[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] frequency offset of USRP
From: |
Sl Peng |
Subject: |
[Discuss-gnuradio] frequency offset of USRP |
Date: |
Sun, 30 Mar 2008 06:39:06 +0200 |
Hi all:
My task is to use the USRP to down convert the GPS L1 channel to
baseband signal.
I have some problems with the carrier offset of the DBS_RX
daughterboard.
When I set f_l0 of the DBS_RX daughterboard to be 1575.42e6 which is the
center frequency of GPS L1 signal, I found the real frequency in the
tune(double _freq) function was 1575.5e6. So there is 80000 hz offset. I
want to know what the output of DBSRX daughterboard is. What is the
effect of this offset to my input signal?
Next, I need to down convert the output signal of the daughterboard. Fox
example, I want to down convert it to 1.5M hz. Then, what should I do?
I think I should use this function:
usrp_standard_rx: set_rx_freq (int channel, double freq).
What is the input value of freq?
Any suggestions? Thanks a lot!
--
Posted via http://www.ruby-forum.com/.
- [Discuss-gnuradio] frequency offset of USRP,
Sl Peng <=