Re: [Discuss-gnuradio] GNU Radio Companion USRP Transmitter Example

[isaacgerg]

No luck.  Can you send me an example xml schema for a transmitter that you
know works?

Thanks in advanced,
Isaac

Josh Blum wrote:
> 
> 
> isaacgerg wrote:
> 
>> Does anyone have an .xml file that shows an example of doing this? 
>> Currently, I have a USRP sink with the following parameters and I cant 
>> get
>> any signals on my Rx USRP.  I know my Rx USRP is working as I can run the
>> gnuradio ptt example and I can see energy appearing on the PSD.
>>
>> Here are my USRP Sink parameters:
>> Input type: complex
>> usint #: 0
>> subdev spec: side B
>> freq: 25000000
>> gain 3200
>> mux 0x0
>> auto t/r : ignore
>> tx enable: enable
>> interp: 400
>>
>> The input to the sink is a cosine wave at 10000 with amplitude 100.
>>
>> Thanks in advance.
> 
> 
> Im not sure about the board you are using, but the actual allowed gain 
> parameter is way less than 3200. Set the usrp gain to 0, and try a 
> amplitude of 5000 for the signal source.
> 
> -Josh
> 
> 
-- 
View this message in context: 
http://www.nabble.com/GNU-Radio-Companion-USRP-Transmitter-Example-tp18115899p18116117.html
Sent from the GnuRadio mailing list archive at Nabble.com.