[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] BBN 802.11 bbn_80211b_rx.py
From: |
yyzhuang |
Subject: |
Re: [Discuss-gnuradio] BBN 802.11 bbn_80211b_rx.py |
Date: |
Fri, 25 Jul 2008 09:04:14 -0700 (PDT) |
I'm not sure of the frequency so I tried
./bbn_80211b_rx.py -f 2.462G -d 8 -b -v
Bits Per Encoded Sample = 8
adc frequency = 64000000
decimation frequency = 8
input_rate = 8000000
gain = 45.0
desired freq = 2462000000.0
baseband frequency 2460000000.0
dxc frequency -2000000.0
Samples per data bit = 8
>>> gr_fir_ccf: using SSE
PKT: len=77, rssi=-22, src=00:13:46:16:28:AA, time=557560, rate=1 Mbps
PKT: len=77, rssi=-29, src=00:13:46:16:28:AA, time=1786312, rate=1 Mbps
PKT: len=77, rssi=-26, src=00:13:46:16:28:AA, time=1991192, rate=1 Mbps
PKT: len=77, rssi=-27, src=00:13:46:16:28:AA, time=2195928, rate=1 Mbps
PKT: len=77, rssi=-19, src=00:13:46:16:28:AA, time=2912744, rate=1 Mbps
PKT: len=77, rssi=-28, src=00:13:46:16:28:AA, time=3527168, rate=1 Mbps
PKT: len=77, rssi=-25, src=00:13:46:16:28:AA, time=3936776, rate=1 Mbps
PKT: len=77, rssi=-26, src=00:13:46:16:28:AA, time=4141640, rate=1 Mbps
PKT: len=77, rssi=-24, src=00:13:46:16:28:AA, time=4858456, rate=1 Mbps
PKT: len=77, rssi=-26, src=00:13:46:16:28:AA, time=5063192, rate=1 Mbps
PKT: len=77, rssi=-21, src=00:13:46:16:28:AA, time=5268192, rate=1 Mbps
This time packets are received. It seems to me that (desired freq) + (dxc
frequency) = (baseband frequency)
BTW, I'm in Ubuntu 8.04
Greg Troxel wrote:
>
> BTW, what does that guy mean "Not sure when you updated, but we have
> changed
> the checked in code to default to 2437, and run it like this (as a
> NetBSD
> rc.d start script)", following the above link?
>
> details if you care, but surely they have little to do with your issues.
>
> http://www.netbsd.org/docs/guide/en/chap-rc.html
>
> about your output:
>
> ./bbn_80211b_rx.py -f 2.437G -v -b
> Bits Per Encoded Sample = 8
> adc frequency = 64000000
> decimation frequency = 16
> input_rate = 4000000
> gain = 45.0
> desired freq = 2437000000.0
> baseband frequency 2432000000.0
> dxc frequency -5000000.0
> Samples per data bit = 8
> >>> gr_fir_ccf: using SSE
>
> 2.432G is used instead of 2.437G. Also the dxc frequency is negative.
> And
> no packets get printed out.
>
> I am unclear on dxc.
>
> Are you sure there are strong signals at the 1 Mb/s rate on 2437 MHz?
>
> /adroitgrdevel/gr-bbn/src/examples/bbn_80211b_rx.py just like this:
>
> What operating system are you running on? That script may be expecting
> the NetBSD tap device, and your system's might be different.
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
--
View this message in context:
http://www.nabble.com/BBN-802.11-bbn_80211b_rx.py-tp18642793p18654729.html
Sent from the GnuRadio mailing list archive at Nabble.com.