discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] VM Make Check problem : createfilemapping isnota


From: Richard Clarke
Subject: Re: [Discuss-gnuradio] VM Make Check problem : createfilemapping isnotavailable
Date: Wed, 06 Aug 2008 10:53:11 +1200
User-agent: Thunderbird 2.0.0.16 (Windows/20080708)

Hi All,

just an update to this issue. I have managed to get the GNU Radio Virtual Machine talking to the USRP, at least the usrp_fft.py is working. The 'createfilemapping' was a red herring as Eric had mentioned in his reply. The real problem was that I was trying to run the VM using VM Server version 1.06 which is too old to support the USB2.0 interface. I changed to the latest VM Player (2.04) which does support USB2.0 and things started to work, although there may still be some issues lurking as the usrp_benchmark_usb.py tes hung when trying to transfer at 4MB/sec.

Cheers
Richard

Richard Clarke wrote:
Bumped

Hi All,

I have been attempting to use a GNU Radio 3.1.2 Virtual Machine (guest OS is Open Suse 10.2) kindly provided by Chiara De Dominicis, with the USRP. Initial communications with the USRP were established, enough for firmware download to the USRP. However when attempting to run any script that makes use of the USRP the following error is thrown up after a few seconds before the whole VM crashes into oblivion.

Terminal message output: gr_check_counting: enter_SEARCHING at offset 0 (0x00000000) gr_vmcircbuf_createfilemapping: createfilemapping is not available

Now, I've also created my own Ubuntu 8.04 VM with GNURadio 3.1.2 built from source (svn trunk) and installed. I got as far as the 'make check'. All tests passed EXCEPT one relating to gr_vmcircbuf_createfilemapping: The specific messages are:

Testing gr_vmcircbuf_createfilemapping_factory...
gr_vmcircbuf_createfilemapping: createfilemapping is not available
.........gr_vmcircbuf_createfilemapping: createfilemapping: Doesn't work

from here on all other tests pass OK. The same kind of error occurs when just trying to run the dial_tone.py example script.

So, there is a point of common failure between the 2 VM's. Does anyone have a clue as to what might be the cause for this failure and what if anything can be done to rectify it? If there is any more info I can provide that may help with a diagnosis then please let m know and I'll do my best to obtain it.

Thanks for any assistance.

Cheers
Richard

=======================================================================
This email, including any attachments, is only for the intended
addressee.  It is subject to copyright, is confidential and may be
the subject of legal or other privilege, none of which is waived or
lost by reason of this transmission.
If the receiver is not the intended addressee, please accept our
apologies, notify us by return, delete all copies and perform no
other act on the email.
Unfortunately, we cannot warrant that the email has not been
altered or corrupted during transmission.
=======================================================================



_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio


=======================================================================
This email, including any attachments, is only for the intended
addressee.  It is subject to copyright, is confidential and may be
the subject of legal or other privilege, none of which is waived or
lost by reason of this transmission.
If the receiver is not the intended addressee, please accept our
apologies, notify us by return, delete all copies and perform no
other act on the email.
Unfortunately, we cannot warrant that the email has not been
altered or corrupted during transmission.
=======================================================================





reply via email to

[Prev in Thread] Current Thread [Next in Thread]