[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Unresponsive USRP2
From: |
Matt Edman |
Subject: |
Re: [Discuss-gnuradio] Unresponsive USRP2 |
Date: |
Fri, 10 Oct 2008 14:28:21 -0400 |
User-agent: |
Mutt/1.4.2.2i |
On Fri, Oct 10, 2008 at 10:48:10AM -0700, Matt Ettus wrote:
> Matt Edman wrote:
> >I received two USRP2 devices, both with RFX2400 daughterboards and VERT400
> >antennas. One of the USRP2s works great and can be found when I run the
> >usrp2/host/apps/find_usrps application. The other device doesn't seem to be
> >responsive. When it is powered on, the unresponsive device only has the LED
> >labeled "F" illuminated, whereas the responsive device has both the "D" and
> >"F" LEDs lit up. I have tried swapping SD cards and even daughterboards
> >between the two devices, which had no effect.
> >
> >Did I get a DOA USRP2? Or is there something else I need to do to get the
> >unresponsive device to start working? Any tips would be appreciated.
> >
>
> Remove all daughterboards and cables except the power supply. Does it do the
> same thing, or do you get two leds?
I still only get one LED.
> Also, if the SD card slot is stiff and/or
> sticking, make sure that when you push the card in that it clicks and slides
> back a bit.
Yep, the SD card slot makes the clicking sound when I push the card in and the
card seems to be in there properly.
> If that still doesn't work, please call the office so we can
> discuss it further.
Will do. Thanks!
--Matt