[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Error while receiving
From: |
kaleem ahmad |
Subject: |
Re: [Discuss-gnuradio] Error while receiving |
Date: |
Sat, 11 Oct 2008 09:49:23 -0700 (PDT) |
Thanks Johnathan and Eric,
Please dont consider my last mail, because the way Johnathan suggested is
working but I have some other problems.
Best Regards
Kaleem Ahmad
kaleem ahmad wrote:
>
> Thanks Johnathan,
>
> I am tring following as you suggested:
>
> "The usrp.source_c block only has one output, so you just connect:
>
> fg.connect(src, fg1)
> fg.connect(src, fg2)"
>
> But by doing this my fg2 is working but fg1 is not...It seems as the
> connection of fg1 is overwritten by fg2???
> By the way I am using gnuradio3.1.1...is there any update in connect
> method in later versions?
> By the way I have also tried following:
>
> fg.connect(src, fg1)
> ........
> while(1):
> disconnect_all()
> fg.connect(src,fg2)
> .......
> disconnect_all()
> fg.connect(src,fg1)
>
> But it is also not working? any suggestion for both of these methods?
>
> Best Regards
>
> Kaleem Ahmad
>
>
>
>
> Johnathan Corgan-2 wrote:
>>
>> On Fri, Oct 10, 2008 at 9:02 AM, kaleem ahmad <address@hidden>
>> wrote:
>>
>>> Addition to my above question I also want to know how can I connect two
>>> different flowgraphs with 'usrp.source_c',
>>>
>>> I was trying following
>>>
>>> src = usrp.source_c(...)
>>> fg.connect((src, 0),.......blocks of fg1)
>>> fg.connect((src, 1),.......blocks of fg2)
>>
>> --
>> Johnathan Corgan
>> Corgan Enterprises LLC
>> http://corganenterprises.com/
>>
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>>
>
>
--
View this message in context:
http://www.nabble.com/Error-while-receiving-tp19900161p19934213.html
Sent from the GnuRadio mailing list archive at Nabble.com.
- [Discuss-gnuradio] Error while receiving, kaleem ahmad, 2008/10/09
- Re: [Discuss-gnuradio] Error while receiving, Eric Blossom, 2008/10/09
- Re: [Discuss-gnuradio] Error while receiving, kaleem ahmad, 2008/10/10
- Re: [Discuss-gnuradio] Error while receiving, kaleem ahmad, 2008/10/10
- Re: [Discuss-gnuradio] Error while receiving, Johnathan Corgan, 2008/10/10
- Re: [Discuss-gnuradio] Error while receiving, kaleem ahmad, 2008/10/11
- Re: [Discuss-gnuradio] Error while receiving,
kaleem ahmad <=
- Re: [Discuss-gnuradio] Error while receiving, Eric Blossom, 2008/10/11
- Re: [Discuss-gnuradio] Error while receiving, kaleem ahmad, 2008/10/17
- Re: [Discuss-gnuradio] Error while receiving, Eric Blossom, 2008/10/11
Re: [Discuss-gnuradio] Error while receiving, kaleem ahmad, 2008/10/15