[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Some USRP2 Questions
From: |
Firas A. |
Subject: |
Re: [Discuss-gnuradio] Some USRP2 Questions |
Date: |
Mon, 1 Dec 2008 20:48:53 -0800 (PST) |
Hi Matt,
Thank you for the answers. I will try to add them to USRP2 FAQ Wiki.
One thing is not clear which is the TX path interpolation.
In RX path:
if ADC sampling = 100MHz,
and if Min decimation = 4
=> max IF bandwidth = 25MHz
=> Max IF Ethernet rate = 4 bytes per sample * 25 MSPS = 100 Mbyte/sec = 800
Mbit/sec (Every thing is clear)
But this is not clear in TX path because:
If Max IF Ethernate rate = 100 Mbyte/sec => Max TX IF bandwidth = 25 MHz
and if min interpolation = 4 (as you said in your previous email)
=> DAC will get 100 MSPS
But USRP2 DAC is clocked at 400 MHz, so where is the other missing
interpolation by 4 in the TX chain?
Best Regards,
Firas
--
View this message in context:
http://www.nabble.com/Some-USRP2-Questions-tp20729711p20786100.html
Sent from the GnuRadio mailing list archive at Nabble.com.