[Discuss-gnuradio] Usrp2 Fpga Synthesis Question - Ucf related
From:
alfayez
Subject:
[Discuss-gnuradio] Usrp2 Fpga Synthesis Question - Ucf related
Date:
Wed, 17 Dec 2008 18:19:09 -0500
Hi,
I've recently started looking at the Spartan3 ISE projects. I started trying to re-synthesize the ISE projects, while using the "u2_rev3.ucf" file, I realized that I had to enable the "Allow Unmatched LOC Constraints" option, which seems okay since some declared signals might be used. However I also had to comment out the following signals from it
#NET "clk_to_mac" TNM_NET = "clk_to_mac";
#TIMESPEC "TS_clk_to_mac" = PERIOD "clk_to_mac" 8 ns HIGH 50 %;
#NET "clk_fpga_p" TNM_NET = "clk_fpga_p";
#TIMESPEC "TS_clk_fpga_p" = PERIOD "clk_fpga_p" 10 ns HIGH 50 %;
#NET "cpld_clk" TNM_NET = "cpld_clk";
#TIMESPEC "TS_cpld_clk" = PERIOD "cpld_clk" 40 ns HIGH 50 %;
#NET "GMII_RX_CLK" TNM_NET = "GMII_RX_CLK";
#TIMESPEC "TS_GMII_RX_CLK" = PERIOD "GMII_RX_CLK" 8 ns HIGH 50 %;
#NET "ser_rx_clk" TNM_NET = "ser_rx_clk";
#TIMESPEC "TS_ser_rx_clk" = PERIOD "ser_rx_clk" 10 ns HIGH 50 %;
#NET "cpld_clk" CLOCK_DEDICATED_ROUTE = FALSE;
I looked for the signals to see if they're used in any of the verilog files, I saw them instantiated but never used I'm also assuming that the "clk_fpga" signal is the main FPGA clock. Since the signals I commented out are clocks, did I just do something wrong and the project supposed to synthesize without this modification. Or are my change wrong?
Thanks in advance,
Al Fayez
Listen to 350+ music, sports, & news radio stations including songs for the holidays FREE while you browse. Start Listening Now!