Re: [Discuss-gnuradio] Newbie need help with installing gnuradio 3.1.3

[mollasadra]

Not sure if you've already figured it out but this page might be of help:
http://gnuradio.wordpress.com/2008/10/20/installing-gnu-radio/



petedao wrote:
> 
> Hi
> 
> Thank you for all your help.  I got gnuradio installed now.   To test it
> with my USRP boards, I am having a few questions:
> 
> 1. I followed the example and tried to run the  ./usrp_oscope.py, but the
> file is not under:
> 
> address@hidden usrp]# ls /usr/local/share/gnuradio/examples/usrp
> fm_tx_2_daughterboards.py  usrp_nbfm_ptt.py        usrp_wfm_rcv_nogui.py
> fm_tx4.py                  usrp_nbfm_rcv.py        usrp_wfm_rcv_pll.py
> max_power.py               usrp_spectrum_sense.py  usrp_wfm_rcv.py
> test_dft_analysis.py       usrp_test_loop_lfsr.py  usrp_wfm_rcv_sca.py
> test_dft_synth.py          usrp_tv_rcv_nogui.py    usrp_wxapt_rcv.py
> usrp_am_mw_rcv.py          usrp_tv_rcv.py
> usrp_benchmark_usb.py      usrp_wfm_rcv2_nogui.py
> 
> 2. When I tried to run ./usrp_wfm_rcv.py, I am getting:
> 
> address@hidden usrp]# ./usrp_wfm_rcv.py 101.5
> Traceback (most recent call last):
>   File "./usrp_wfm_rcv.py", line 23, in <module>
>     from gnuradio import gr, gru, eng_notation, optfir
> ImportError: No module named gnuradio
> 
> How to fix these problems?
> 
> 3.  I have 2 RFX900 and a USRP, when positioning my RFX900 boards on USRP
> motherboard, the two RFX900 boards should be oriented in opposition
> direction and as long as the four holds of the RFX900 boards matched with
> the USRP motherboard's, I am putting it correctly right?  I just want to
> confirm it before I charge up the board.
> 
> 4. In chapter 4 of the gnuradio tutorial, it mentioned that I can test my
> USRP configuration by " Then connect your speaker to the sound card and
> insert a piece of wire to the RX-A connector" ,  How to insert " a piece
> of
> wire" to the RX-A connector.  What kind of wire do I need and what should
> I
> connect the wire to on the other end?
> 
> 5. Is there any other ways of testing my USRP configuration?
> 
> Sorry for asking so many questions.  I hope to be able to get started
> quickly and be able to contribute back to the community as much as I can.
> 
> Thanks in advance for all your help.
> 
> Pete
> 
> 
> 
> 
> 
> 
> 
> On Sun, Feb 15, 2009 at 3:24 AM, Josh Blum <address@hidden> wrote:
> 
>> Pete Kay wrote:
>>
>>> Hi,
>>>
>>> I am just getting started with gnuradio on Fedora 9.
>>>
>>> While running ./bootstrap, I am getting the following error:
>>>
>>> address@hidden gnuradio-3.1.3]# ./bootstrap
>>> gr-trellis/doc/Makefile.am:51: `%'-style pattern rules are a GNU make
>>> extension
>>>
>>>
>>>
>> It could just be a warning, can you run ./configure after ./bootstrap?
>>
>> Double check http://gnuradio.org/trac/wiki/FedoraInstall
>>
>> -josh
>>
>>  I have automake installed on my system already.  Does anyone know why
>> and
>>> how to fix this problem?
>>>
>>> Thanks in advance for your help.
>>>
>>> Pete
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> address@hidden
>>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>
>>
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 
> 

-- 
View this message in context: 
http://www.nabble.com/Newbie-need-help-with-installing-gnuradio-3.1.3-tp22020397p22058095.html
Sent from the GnuRadio mailing list archive at Nabble.com.