By giving the python path I able to open grc package.
But still simple sound prog. in not running.
I able to run audio_tone.py on command prompt.
also test the audio_fft.py on command prompt. both run fine.
But on grc any example given same erro.
address@hidden tushar]# export PYTHONPATH=/usr/local/lib/python2.5/site-packages
address@hidden tushar]# grc
<<< Welcome to gnuradio 3.2svn >>>
Showing: ""
(grc:3195): GVFS-RemoteVolumeMonitor-WARNING **:
cannot connect to the session bus:
org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible
causes include: the remote application did not send a reply, the
message bus security policy blocked the reply, the reply timeout
expired, or the network connection was broken.
(grc:3195): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the
session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a
reply. Possible causes include: the remote application did not send a
reply, the message bus security policy blocked the reply, the reply
timeout expired, or the network connection was broken.
Generating: "/home/tushar/Desktop/Project/top_block.py"
Executing: "/home/tushar/Desktop/Project/top_block.py"
Traceback (most recent call last):
File "/home/tushar/Desktop/Project/top_block.py", line 10, in <module>
from gnuradio import audio
File "/usr/local/lib/python2.5/site-packages/gnuradio/audio.py",
line 35, in <module>
from gnuradio import gr
File "/usr/local/lib/python2.5/site-packages/gnuradio/gr/__init__.py",
line 43, in <module>
from gnuradio_swig_python import *
File
"/usr/local/lib/python2.5/site-packages/gnuradio/gr/gnuradio_swig_python.py",
line 23, in <module>
from gnuradio_swig_py_runtime import *
File
"/usr/local/lib/python2.5/site-packages/gnuradio/gr/gnuradio_swig_py_runtime.py",
line 6, in <module>
import _gnuradio_swig_py_runtime
ImportError: libboost_thread-gcc43-mt-1_37.so.1.37.0: cannot open
shared object file: No such file or directory
thanks and regards
tushar
On Tue, Mar 10, 2009 at 9:09 AM, Josh Blum <address@hidden> wrote:
I assume after configure, you did make and sudo make install.
Then perhaps you PYTHONPATH is not setup properly. Run the following command
from the terminal: python -c "import gnuradio" does it produce an error? Can
you run any of the gnuradio programs, like usrp_fft.py?
-Josh
Tushar Patel wrote:
hi josh, previously I used the gnuradio3.1.3, where i able to run grc,
but problem with audio-alsa
so download the latest version of gnuradio, and configure
I download via ' svn co http://gnuradio.org/svn/gnuradio/trunk gnuradio
The following GNU Radio components have been successfully configured:
config
gruel
omnithread
gnuradio-core
pmt
mblock
usrp
usrp2
gr-usrp
gr-usrp2
gr-msdd6000
gr-audio-alsa
gr-audio-jack
gr-audio-oss
gr-audio-portaudio
gr-atsc
gr-cvsd-vocoder
gr-gpio
gr-gsm-fr-vocoder
gr-pager
gr-radar-mono
gr-radio-astronomy
gr-trellis
gr-video-sdl
gr-wxgui
gr-qtgui
gr-sounder
gr-utils
gnuradio-examples
grc
You my now run the make command to build these components.
*********************************************************************
The following components were skipped either because you asked not
to build them or they didn't pass configuration checks:
gcell
gr-gcell
gr-audio-osx
gr-audio-windows
gr-comedi
after that when I try to run grc from command
following message come
address@hidden tushar]# grc
Traceback (most recent call last):
File "/usr/local/bin/grc", line 25, in <module>
from gnuradio.grc.platforms.base.Constants import VERSION
ImportError: No module named grc.platforms.base.Constants
please guide me,
thanks and regards
tushar.