[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] gnuradio full duplex, bechmark_rx with additional tx
From: |
Aaron Israel |
Subject: |
[Discuss-gnuradio] gnuradio full duplex, bechmark_rx with additional tx signal |
Date: |
Fri, 3 Jul 2009 01:23:11 +0200 |
Hi,
i have modified the benchmark_rx example.
- I moved the usrp part to the receiver_path und made the block 0
input 0 output.
- I also added another hierarchical block with a signal path which
just sends out a sinus signal on another frequency than the rx-freq.
when I connect both hier-blocks to the top block - I get the sinus
signal out but cannot a receive a single packet. when I disconnect the
signal path the receive path works just fine.
I also worked my way through the push to talk example which can do full
duplex to - but cannot find anything that is different that i might do
wrong.
Adding an additional rx path to the benchmark_tx example worked just
fine.
i would highly appreciate any pointer which might lead me to the right
direction
--
Posted via http://www.ruby-forum.com/.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] gnuradio full duplex, bechmark_rx with additional tx signal,
Aaron Israel <=