[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Benchmark_tx/rx with audio input and output
From: |
udadidd |
Subject: |
[Discuss-gnuradio] Benchmark_tx/rx with audio input and output |
Date: |
Mon, 24 Aug 2009 11:29:10 -0700 (PDT) |
Hi
I wanted to do the benchmark tx and rx with Audio instead of the USRP.
I made all the changes to the transmitter and the receiver. The transmitter
works fine but the receiver hangs!!
I do the upconversion on transmitter after modulating, and transmit. and do
the downconversion on receiver side before demodulating.
Upconversion : I multiply by a sine wave
Downconversion : I multiply by both sine and cos, (which make I and Q) and
use a float_to_complex to make them into one complex stream.
I set the converter rate = sample rate = 18000
frequency = 250 Hz
interp_deci_rate = 200
Bit rate comes to 45 when samples_per_symbol = 2
I guess the hanging is at the delete_head() stage of the pkt.py! That just
means the packets received are not in proper format! Wr can i possibly be
going wrong? I am stuck here and any suggestion will be of great help!
Thank u
--
View this message in context:
http://www.nabble.com/Benchmark_tx-rx-with-audio-input-and-output-tp25121185p25121185.html
Sent from the GnuRadio mailing list archive at Nabble.com.
- [Discuss-gnuradio] Benchmark_tx/rx with audio input and output,
udadidd <=