[Discuss-gnuradio] signal processing import help

[Berk]

Hi,

I have written my new signal processing block and able to install it. But
python does not import my module.Here is what it says when i write

python
>>> from gnuradio import berk
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
ImportError: cannot import name berk

And this is the response when i do "make install"


address@hidden home]# cd /home/proje/GNUradio/gnuradio-3.2.2/block1
address@hidden block1]# make install
Making install in config
make[1]: Entering directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/config'
make[2]: Entering directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/config'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/config'
make[1]: Leaving directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/config'
Making install in src
make[1]: Entering directory `/home/proje/GNUradio/gnuradio-3.2.2/block1/src'
Making install in lib
make[2]: Entering directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/src/lib'
make  install-am
make[3]: Entering directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/src/lib'
make[4]: Entering directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/src/lib'
make[4]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/lib/python2.5/site-packages/gnuradio" || /bin/mkdir -p
"/usr/local/lib/python2.5/site-packages/gnuradio"
 /bin/sh ../../libtool   --mode=install /usr/bin/install -c   _berk.la
'/usr/local/lib/python2.5/site-packages/gnuradio'
/usr/bin/install -c .libs/_berk.so
/usr/local/lib/python2.5/site-packages/gnuradio/_berk.so
/usr/bin/install -c .libs/_berk.lai
/usr/local/lib/python2.5/site-packages/gnuradio/_berk.la
PATH="$PATH:/sbin" ldconfig -n
/usr/local/lib/python2.5/site-packages/gnuradio
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib/python2.5/site-packages/gnuradio

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
test -z "/usr/local/lib/python2.5/site-packages/gnuradio" || /bin/mkdir -p
"/usr/local/lib/python2.5/site-packages/gnuradio"
 /usr/bin/install -c -m 644 berk.py
'/usr/local/lib/python2.5/site-packages/gnuradio'
Byte-compiling python modules...
berk.py
Byte-compiling python modules (optimized versions) ...
berk.py
test -z "/usr/local/include/gnuradio/swig" || /bin/mkdir -p
"/usr/local/include/gnuradio/swig"
 /usr/bin/install -c -m 644 berk.i '/usr/local/include/gnuradio/swig'
test -z "/usr/local/include/gnuradio" || /bin/mkdir -p
"/usr/local/include/gnuradio"
 /usr/bin/install -c -m 644 berk_equalize_cc.h '/usr/local/include/gnuradio'
make[4]: Leaving directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/src/lib'
make[3]: Leaving directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/src/lib'
make[2]: Leaving directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/src/lib'
Making install in python
make[2]: Entering directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/src/python'
make[3]: Entering directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/src/python'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/src/python'
make[2]: Leaving directory
`/home/proje/GNUradio/gnuradio-3.2.2/block1/src/python'
make[2]: Entering directory `/home/proje/GNUradio/gnuradio-3.2.2/block1/src'
make[3]: Entering directory `/home/proje/GNUradio/gnuradio-3.2.2/block1/src'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/proje/GNUradio/gnuradio-3.2.2/block1/src'
make[2]: Leaving directory `/home/proje/GNUradio/gnuradio-3.2.2/block1/src'
make[1]: Leaving directory `/home/proje/GNUradio/gnuradio-3.2.2/block1/src'
make[1]: Entering directory `/home/proje/GNUradio/gnuradio-3.2.2/block1'
make[2]: Entering directory `/home/proje/GNUradio/gnuradio-3.2.2/block1'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/lib/pkgconfig" || /bin/mkdir -p
"/usr/local/lib/pkgconfig"
make[2]: Leaving directory `/home/proje/GNUradio/gnuradio-3.2.2/block1'
make[1]: Leaving directory `/home/proje/GNUradio/gnuradio-3.2.2/block1'

What should i do to be able import my module?
Thanks in advance

Best regards
Berk

-- 
View this message in context: 
http://old.nabble.com/signal-processing-import-help-tp28340868p28340868.html
Sent from the GnuRadio mailing list archive at Nabble.com.