Re: [Discuss-gnuradio] Can't locate gr-uhd component

[Elvis Dowson]

Hi Manuel,

                      Thanks for the reply.

I tried burning the matched FPGA and firmware images onto the SD card, but the LED lights don't blink any more. 

Here are the command fragments that I used to write the two images, in succession onto the SD card

Write the new FPGA image to the SD card:

$ cd uhd/host/utils

$ sudo ./usrp2_card_burner.py --dev=/dev/sdb --fpga=/home/elvis/Downloads/usrp2-image/u2_rev3_uhd_20100706.bin

Write the new firmware image to the SD card:

$ sudo ./usrp2_card_burner.py --dev=/dev/sdb --fw=/home/elvis/Downloads/usrp2-image/txrx_uhd_20100706.bin

Best regards,

Elvis