Re: [Discuss-gnuradio] Update the USRP2

[Tobias Schmid]

Am 27.07.2010 18:06, schrieb Matt Ettus:
> On 07/27/2010 08:38 AM, Tobias Schmid wrote:
> > Hello,
> >
> > it's me for the third time.
> > I decided to try working with the uhd. I followed the instructions on
> >
> > http://www.ettus.com/uhd_docs/manual/html/usrp2.html ,
> >
> > but when the usrp2_card_burner(_gui).py finished it's work, I get the 
> > following messages:
> >
> > address@hidden:~/gnuradio/uhd/host/utils>  sudo 
> > ./usrp2_card_burner.py --dev=/dev/sdd 
> > --fpga=/home/gnuradio/USRP2_Images/USRP2/FPGA/u2_rev3-20100603.bin
> > root's password:
> > Burn fpga image:
> > 1684+1 Datensätze ein
> > 1684+1 Datensätze aus
> > 862584 Bytes (863 kB) kopiert, 4,09834 s, 210 kB/s
> >
> > Verification Failed:
> > 2048+0 Datensätze ein
> > 2048+0 Datensätze aus
> > 1048576 Bytes (1,0 MB) kopiert, 1,33575 s, 785 kB/s
>
>
> Verification failed means that the card doesn't have a good image, so 
> it definitely won't work until you get a good image on there.  Are you 
> sure the write protect is off?
>
> Matt
Hello,

thanks for the quick answer.
I can't check it right now, because I am out of office. Tomorrow morning 
I'm going to check it and afterwards I'll post it here.

Tobias