Re: [Discuss-gnuradio] Having firmware trouble in USRP2 - txrx_wbx_udp_20100507

[Josh Blum]

You are running experimental images. You need matching experimental host 
code: http://gnuradio.org/cgit/jblum.git/log/?h=udp

-josh

On 10/25/2010 04:11 AM, Vladutzzz wrote:
> Hi everyone!
>
> I recently updated the USRP2 firmware to txrx_wbx_UDP_20100507.bin from
> http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries .
> I also downloaded and installed u2_rev3-udp-ise12-20100615.bin  from the
> same link.
> These images are specifically designed for WBX with UDP. After putting the
> SD card into the USRP2, I've tried pinging the USRP2, the process ending
> unsuccessfully, which I've read somewhere it's expected since it doesn't
> have a fully implemented IP stack. But it doesn't reply to "find_usrps" nor
> "benchmark_tx" nor "usrp2_probe".
> How can I test to see if the firmware and fpga images are actually
> functioning and the board is operating properly?
> I am pretty stuck with this and would really appreciate any useful input.
> Thanks,
>
> Vlad.