[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] cannot ping my USRP2
From: |
Josh Blum |
Subject: |
Re: [Discuss-gnuradio] cannot ping my USRP2 |
Date: |
Tue, 14 Dec 2010 09:54:06 -0800 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.13) Gecko/20101208 Thunderbird/3.1.7 |
On 12/14/2010 09:39 AM, Tobias Schmid wrote:
> Hello,
>
> our institute owns 4 USRP2. Three of them can be pinged.
> The 4th one cannot.
> It's neither possible to use it with UHD firmware and FPGA image.
> If I try uhd_find_device no device is found.
> The firmware and the FPGA image on the SD card is working fine.
> I checked this using one of my other devices.
>
> Can someone tell me, what the problem might be?
> Is it demaged? Is the eeprom demaged?
> Or can I solve this problem on my own?
>
What LEDs light up upon power on? D and F?
Can you attach a serial terminal to the rear and tell me what the USRP2
prints to the terminal at power up?
http://www.ettus.com/uhd_docs/manual/html/usrp2.html#debugging-networking-problems
Can you try an older image set and tell me if the behavior is the same?
http://www.ettus.com/downloads/uhd_images/UHD-images-0000.20100901003255.b5461fc/
Thanks,
-Josh